Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Roto-Fab
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Mechanical Maintenance: Break-in / Oil & Fluids / Servicing


Reply
 
Thread Tools
Old 09-09-2015, 10:43 PM   #1
Terry Robinson
 
Drives: white and black LT1
Join Date: May 2015
Location: San Antonio
Posts: 8
Dealership blew my engine

I went in for a oil change back in June 3k miles later my engine blew due to no oil. I didn't have any oil leaks anywhere on my car I tried talking to the gm but never can get threw to him even after voice-mail so I talk to service manger and couldn't answer any of my questions and just ketp replying my guys dont mess up we are to professional and go by a system so stuff like that wouldn't happen. So i ended up moving my car from the dealership to another one and as I was picking it up found out they put oil in it im guessing to cover there butts. The other dealership broke down the engine and seen that no oil cause the rods to burn up. somebody help me out please this is about to be going on for almost a month in a half....
Terry Robinson is offline   Reply With Quote
Old 09-09-2015, 11:04 PM   #2
rebelyell22


 
rebelyell22's Avatar
 
Drives: 2011 SIM 2SS/RS LS3
Join Date: Sep 2013
Location: Tupelo, MS
Posts: 5,902
Contact GM directly...
__________________
2011 2SS/RS built 8/24/10
rebelyell22 is offline   Reply With Quote
Old 09-09-2015, 11:34 PM   #3
ZYBORG
Lets roll...
 
ZYBORG's Avatar
 
Drives: 14'
Join Date: Jun 2014
Location: TX/S.FL
Posts: 1,495
Which dealership?
__________________
ZYBORG is offline   Reply With Quote
Old 09-09-2015, 11:43 PM   #4
Terry Robinson
 
Drives: white and black LT1
Join Date: May 2015
Location: San Antonio
Posts: 8
Freedom cheavy
Terry Robinson is offline   Reply With Quote
Old 09-10-2015, 12:14 AM   #5
climb-101
 
Drives: 2010 2ss
Join Date: Jul 2015
Location: montana
Posts: 76
no engine will run 3k miles with no oil dosnt matter what the motor is. if it had been 30 miles that's one thing but not 3k. they will know the mileage from when you brought it in and they will check it now. you would never have made it home if they forgot oil when they changed it. I would look for a leak someplace or maybe something else went wrong internally.

did you check the oil yourself?
climb-101 is offline   Reply With Quote
Old 09-10-2015, 12:23 AM   #6
Caswell239

 
Caswell239's Avatar
 
Drives: 2011 2ss/rs
Join Date: Nov 2011
Location: Canada
Posts: 1,431
And you would have low oil warning going off.


Sent from my iPhone using Tapatalk
Caswell239 is offline   Reply With Quote
Old 09-10-2015, 12:28 AM   #7
climb-101
 
Drives: 2010 2ss
Join Date: Jul 2015
Location: montana
Posts: 76
it's possable for an oil pump to fail or filter to split.
climb-101 is offline   Reply With Quote
Old 09-10-2015, 12:19 PM   #8
Terry Robinson
 
Drives: white and black LT1
Join Date: May 2015
Location: San Antonio
Posts: 8
Normally my engine light will go off around 15 to 20% I took it in around 30% ( i know thats just a estiment of the oil) but what I believe is what I went in with is what I left with and that maybe the guys got side tracked because normal when I get my car back from a oil change they reset dash which wasn't even done. They had my car in the back for almost an hour and also my oil light never came on like normal. I have a pic of the engine broke down from the other dealership what failed ill see if I can post
Terry Robinson is offline   Reply With Quote
Old 09-10-2015, 12:29 PM   #9
Terry Robinson
 
Drives: white and black LT1
Join Date: May 2015
Location: San Antonio
Posts: 8
So looks like 3 and 4 rod bearings failed. I dont know how to post a pic
Terry Robinson is offline   Reply With Quote
Old 09-10-2015, 12:38 PM   #10
Terry Robinson
 
Drives: white and black LT1
Join Date: May 2015
Location: San Antonio
Posts: 8
Cant tell if the pic post or not
Terry Robinson is offline   Reply With Quote
Old 09-10-2015, 12:41 PM   #11
Terry Robinson
 
Drives: white and black LT1
Join Date: May 2015
Location: San Antonio
Posts: 8
This is the cause
Attached Images
 
Terry Robinson is offline   Reply With Quote
Old 09-10-2015, 02:31 PM   #12
climb-101
 
Drives: 2010 2ss
Join Date: Jul 2015
Location: montana
Posts: 76
did you pull the cap off and actually look at the bearing. I see the bolts are loose so what did the crank look like. some times the can turn the crank and run a larger bearing for the rod and save the crank


no matter what they did at the dealership I don't think it was there fault, if it was it wouldn't have made it 3000 miles. it could have been week parts to start with, detonation in one of the 2 cylinder and then causing o e of the bearing to get beat on and going bad then taking out the other one, ect. I just don't think it was a dealership issue. if they are willing to help you deal with it, then great.
climb-101 is offline   Reply With Quote
Old 09-10-2015, 03:17 PM   #13
Russell James


 
Russell James's Avatar
 
Drives: '15 SS 1LE, '69 Z28 drag car
Join Date: Dec 2009
Location: Mich
Posts: 4,482
Give Chevrolet a call, the number is in the back of your owner's manual.

Impossible for anyone to know the cause from a story and internet picture.

If it was out of oil, wasn't the low oil light on? That comes on way before you would be low enough on oil to do any damage.

Of all the possibilities of what happened, I'd put the dealer not putting oil in it 3000 miles ago as one of the least likely.
Russell James is offline   Reply With Quote
Old 09-10-2015, 03:37 PM   #14
Ragnar
Destroyed by flooding
 
Ragnar's Avatar
 
Drives: Wife's car
Join Date: Mar 2014
Location: Louisiana
Posts: 4,672
I always check my oil after an oil change, even though I do my own service. A motor that runs with no oil makes a lot of noise.

From the picture, it appears that only two rod bearings got hot.
__________________
Ragnar is offline   Reply With Quote
 
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:12 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2025, vBulletin Solutions, Inc.