Questions about carbon fiber interior parts for 2010 Camaro - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

masterj1109 · 10-07-2015, 10:54 AM

I did post this item in my region section, but I have not had any luck yet so I also wanted to post it here in hopes of success!

Hi All,

I am looking to upgrade the interior of my 2010 Camaro and wanted to replace a lot of pieces with carbon fiber versions. For the first piece, I wanted to get carbon fiber A-Pillars with the dual 52mm (2 1/16) gauge pods but I cannot seem to find any. Does anyone know anyplace that could help me out with this?

If possible it would be nice to find someplace in Dallas or Texas, but that is not a requirement.

Thanks!

Sales@Phastek · 10-07-2015, 11:04 AM

Finding real carbon fiber parts is hard to get. I think there is one vendor on here that does them, cant remember the name right now. I know they are not in Texas though, but their stuff looks good. Dont know if they have the parts you are looking for but I know they make some parts.

You might want to consider Hydro-dipping. Its a different alternative if you can not find the carbon fiber parts you are looking for.

Hope this helps ya.

Thank you,
Ricardo

masterj1109 · 10-07-2015, 11:11 AM

Hey Ricardo,

I do appreciate the help. I am considering hydro if I cannot find the parts in real carbon fiber, but I would prefer to have real carbon fiber parts.

If you happen to find the vendor name I am happy to reach out to them and not being in Texas is not an issue for me. I am not on a time crunch so even if they need to be made at time of order that would not bother me.

Thanks!

masterj1109 · 10-09-2015, 12:16 AM

Would anyone know of anyplace that could assist if I had the trim pieces skinned with real carbon fiber instead of brand new pieces made?

10-07-2015, 10:54 AM	#1
masterj1109 Drives: 2010 Hennessey HPE 650 Camaro Join Date: Feb 2012 Location: Texas Posts: 140 View My Garage	Questions about carbon fiber interior parts for 2010 Camaro I did post this item in my region section, but I have not had any luck yet so I also wanted to post it here in hopes of success! Hi All, I am looking to upgrade the interior of my 2010 Camaro and wanted to replace a lot of pieces with carbon fiber versions. For the first piece, I wanted to get carbon fiber A-Pillars with the dual 52mm (2 1/16) gauge pods but I cannot seem to find any. Does anyone know anyplace that could help me out with this? If possible it would be nice to find someplace in Dallas or Texas, but that is not a requirement. Thanks!

10-07-2015, 11:04 AM	#2
Sales@Phastek Drives: 2016 1SS, 2010 Camaro SS Join Date: Apr 2012 Location: Houston, TX Posts: 3,883	Finding real carbon fiber parts is hard to get. I think there is one vendor on here that does them, cant remember the name right now. I know they are not in Texas though, but their stuff looks good. Dont know if they have the parts you are looking for but I know they make some parts. You might want to consider Hydro-dipping. Its a different alternative if you can not find the carbon fiber parts you are looking for. Hope this helps ya. Thank you, Ricardo __________________

10-07-2015, 11:11 AM	#3
masterj1109 Drives: 2010 Hennessey HPE 650 Camaro Join Date: Feb 2012 Location: Texas Posts: 140 View My Garage	Hey Ricardo, I do appreciate the help. I am considering hydro if I cannot find the parts in real carbon fiber, but I would prefer to have real carbon fiber parts. If you happen to find the vendor name I am happy to reach out to them and not being in Texas is not an issue for me. I am not on a time crunch so even if they need to be made at time of order that would not bother me. Thanks!

10-09-2015, 12:16 AM	#4
masterj1109 Drives: 2010 Hennessey HPE 650 Camaro Join Date: Feb 2012 Location: Texas Posts: 140 View My Garage	Would anyone know of anyplace that could assist if I had the trim pieces skinned with real carbon fiber instead of brand new pieces made?