![]() |
|
|
#1 |
![]() Drives: 2013 ZL1 Join Date: Jul 2016
Location: Oahu, Hawaii
Posts: 40
|
MODS, Whats your best guess?
Good morning everyone. Checking in from the beautiful island of Oahu, HI. I just recently picked up a 2013 ZL1, 6 spd car. Car will have the following mods done here shortly:
-Roto-fab CAI -1 7/8 Long tube headers -no cats -stock mufflers -ID850 injectors -2.4 Metco pulley Car will be tuned by Ted from JRE using the SCT X4. Whats your guess on HP wise to the wheels? |
|
|
|
|
|
#2 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: '21 ZLE A10 Join Date: May 2012
Location: Mechanicsville, VA
Posts: 6,824
|
570 or so rwhp.
__________________
'21 ZLE A10 Wild Cherry PDR 2:00.78 VIR Full 10.68@131.69 1.68 60'
'17 ZL1 A10 Mosaic Black PDR/Nav 2:03.08 VIR Full 11.003@129.2 1.75 (sold) '15 Z/28 #325 Black a/c & stereo. 2:10.1 VIR Full (sold) '12 ZL1 A6 Black 10.52@131 1.55 60' 2:13 VIR Full (sold) |
|
|
|
|
|
#3 |
![]() Drives: 2013 ZL1 Join Date: Jul 2016
Location: Oahu, Hawaii
Posts: 40
|
I'd be pretty happy with that
|
|
|
|
|
|
#4 |
|
"BEASTM*DE"
|
I'll give you closer to 600rwhp with the smaller pulley and headers, but the larger injectors may have you running rich, which will bring the # down...
|
|
|
|
|
|
#5 |
![]() Drives: 2013 ZL1 Join Date: Jul 2016
Location: Oahu, Hawaii
Posts: 40
|
I was thinking about running the stock injectors but everyone is telling me the stock injectors would be at maxed cycle with the 2.4 upper pulley
|
|
|
|
|
|
#6 |
![]() ![]() Drives: 2011 Camaro 1SS Join Date: Feb 2016
Location: Warner Robins Ga
Posts: 778
|
Ted knows how to tune. You will be fine with the ID850s. Since it is a remote tune, you may have to do some datalogging to fine tune it.
__________________
2011 SGM Camaro 1SS/RS A6 - Vengeance Racing built/tuned. 590RWHP/560RWTQ, ADM LSA Conversion, 2.5 Grip-Tec, ZL1 fuel pump, ADM FPCM, FIC1000, VRPD2 Cam and LS3 Conversion with all the internal goodies, American Racing 1 7/8 Headers, no cats, SW Retro Cat Back, ADM Intake, AFCO HX, Varimax Pump, Rotofab Reservoir, B&M Transmission Cooler, VMAX TB, Elite Engineering CC, BMR LCAs, Trailing Arms, Toe Rods, DSS 1000hp axles, ZL1 Bumper and Sideskirts, Night Owl Halos, Matte Black 20" Rohana RC-22 with 20x10-275s/20x11-315s, R1 Concept Premier Drilled/Slotted Rotors, Hawk Ceramic Pads.
|
|
|
|
|
|
#7 |
![]() Drives: 2013 ZL1 Join Date: Jul 2016
Location: Oahu, Hawaii
Posts: 40
|
|
|
|
|
|
|
#8 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2023 1SS 1LE Vivid Orange Join Date: Mar 2011
Location: Fredericksburg, VA
Posts: 2,680
|
600RWHP.
A ZL1 on Oahu? I'm guessing there aren't a lot of them there!
__________________
There are only so many days in your lifetime. So get out and drive your Camaro...
Dan |
|
|
|
|
|
#9 |
![]() Drives: 2013 ZL1 Join Date: Jul 2016
Location: Oahu, Hawaii
Posts: 40
|
|
|
|
|
|
|
|
|
![]() |
|
|