Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
KPM Fuel Systems
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > General Camaro Forums > Camaro ZL1 Forum - ZL1 Specific Topics


Reply
 
Thread Tools
Old 12-27-2016, 08:56 PM   #1
DerrickG
 
DerrickG's Avatar
 
Drives: 2013 Camaro ZL1
Join Date: Mar 2015
Location: San Antonio, TX
Posts: 49
ZL1 leaning on one side

Just wondering if anyone has had this similar issue and what it could be. So my 2013 ZL1 is leaning to the left. On the driver side there is hardly any clearance between the fender and the wheels and I can barely fit my hand between. On the passenger side there is more than enough, atleast 2 more inches of clearance compared to the driver side and I can fit my hand in no problem. Car still drives like normal but looks a little off as it looks lowered on one side. Any thoughts?
Attached Images
 
__________________

Rotofab CAI, 2.55 upper, 8.6 lower, heat exchanger, ID850 injectors, boost a pump, custom ground comp cam, kooks long tube headers with high flow cats, E85 conversion flex fuel, nkg plugs, NT05R Drag radials, 712 rwhp built by Lethal Performance. Instagram Gonz_ZL1
DerrickG is offline   Reply With Quote
Old 12-27-2016, 09:15 PM   #2
Can'tHave2MuchHP
 
Can'tHave2MuchHP's Avatar
 
Drives: Fast
Join Date: Mar 2015
Location: Michigan
Posts: 3,696
Get it to the dealer. Fast.
Can'tHave2MuchHP is offline   Reply With Quote
Old 12-27-2016, 09:19 PM   #3
DerrickG
 
DerrickG's Avatar
 
Drives: 2013 Camaro ZL1
Join Date: Mar 2015
Location: San Antonio, TX
Posts: 49
What could it be? Been having some electrical issues as well. I just noticed it the other day. The car drives fine though. My warranty is gone that's for sure.
__________________

Rotofab CAI, 2.55 upper, 8.6 lower, heat exchanger, ID850 injectors, boost a pump, custom ground comp cam, kooks long tube headers with high flow cats, E85 conversion flex fuel, nkg plugs, NT05R Drag radials, 712 rwhp built by Lethal Performance. Instagram Gonz_ZL1
DerrickG is offline   Reply With Quote
Old 12-27-2016, 09:54 PM   #4
Can'tHave2MuchHP
 
Can'tHave2MuchHP's Avatar
 
Drives: Fast
Join Date: Mar 2015
Location: Michigan
Posts: 3,696
Quote:
Originally Posted by DerrickG View Post
What could it be? Been having some electrical issues as well. I just noticed it the other day. The car drives fine though. My warranty is gone that's for sure.
I have no idea what it could be, someone else is going to have to help with that.
Can'tHave2MuchHP is offline   Reply With Quote
Old 12-27-2016, 09:56 PM   #5
Splat

 
Splat's Avatar
 
Drives: 2012 1SS M6 IOM
Join Date: Dec 2012
Location: New Rochelle New York
Posts: 1,428
Have you looked under the car?

I know these cars came with spring wedges (don't know the true name) for clearance when being moved for transport..... maybe the right side still has it?
__________________
2012 1SS Camaro LS3 Inferno Orange
Mods: LSA Supercharger, 2.55 Pulley, Custom Boost Cam, ARH LTH 1 7/8, HFC, 3' Magnaflow Exhaust, JLT CAI, Elite CC V2, BO White Stage 2 TB, GM 3.91 Gears, DSS CF Driveshaft, BMR Bushing Kit.... . Tuned by JTM Motorsports 540 Hp 550Tq on 9PSI

Axles, Monster Clutch, Hotchkis TVS Track Pack kit.......For 2018.
Splat is offline   Reply With Quote
Old 12-27-2016, 10:02 PM   #6
DerrickG
 
DerrickG's Avatar
 
Drives: 2013 Camaro ZL1
Join Date: Mar 2015
Location: San Antonio, TX
Posts: 49
No I've had the car for a few years now and it just showed up. Was just curious, car is going into the shop in a few days for some upgrades and I'm sure they'll figure it out. Just curious if anyone has seen or knew what it could be to cure my lack of patience lol.
__________________

Rotofab CAI, 2.55 upper, 8.6 lower, heat exchanger, ID850 injectors, boost a pump, custom ground comp cam, kooks long tube headers with high flow cats, E85 conversion flex fuel, nkg plugs, NT05R Drag radials, 712 rwhp built by Lethal Performance. Instagram Gonz_ZL1
DerrickG is offline   Reply With Quote
Old 12-27-2016, 10:59 PM   #7
KaBoom1701
KaBoom1701
 
KaBoom1701's Avatar
 
Drives: 13' ZL1 Red M6
Join Date: Dec 2012
Location: I.E. SoCal (Yucaipa)
Posts: 8,631
Bad spring or mag ride shock would be my guess...
__________________
Mods:
Roto-Fab Intake, WW Res. kit & Big Gulp Air Scoop, Elite Catch Can, ATI Super Damper & 18% OD Pulley, LF Idler pulley bracket, Metco CC breather, ID850 Injectors, Stainless Power Headers w/ ceramic coating, TR71X Spark Plugs, JMS Fuel Pump Booster, Bo White TB, Tuned by Ted @ Jannetty Racing, Ron Davis HX, D3 Reservoir, Pfadt 1" Springs, Moreno Camber Plates, ZL1 Addons Splitter guard washers, Tow Hook kit & rock guards, Hurst Shifter Billet Plus 6 Speed Short Shifter, ZL1 DRL lighting harness, ZL1 Recaro Seats.
KaBoom1701 is offline   Reply With Quote
Old 12-28-2016, 08:48 AM   #8
lbls1


 
lbls1's Avatar
 
Drives: 2002 Camaro SS SOM; 2015 Malibu LTZ
Join Date: Dec 2010
Location: Queens, NY
Posts: 4,071
Some owners have reported the mag shocks crapping out at early mileages (around 40,000 miles). It could be a bad shock or bad shocks. You will need to have someone look at it and tell you what's wrong.
__________________
'02 CAMARO SS SOM; 5.7L LS1/FLS6B
'08 TBSS AWD Black Granite Metallic
'15 Malibu LTZ 2LZ Turbo

'14 CAMARO ZL1 Blue Ray Metallic
'25 Silverado 1500 High Country 6.2L
lbls1 is offline   Reply With Quote
Old 12-28-2016, 10:14 AM   #9
rvnmaniac
 
Drives: 2012 M6 ZL1. 2019 Altima.07 FJR1300
Join Date: Nov 2011
Location: MD
Posts: 665
Quote:
Originally Posted by lbls1 View Post
Some owners have reported the mag shocks crapping out at early mileages (around 40,000 miles). It could be a bad shock or bad shocks. You will need to have someone look at it and tell you what's wrong.
I had one replaced just before my warranty was up.....
rvnmaniac is offline   Reply With Quote
Old 12-28-2016, 05:01 PM   #10
ZMEnow

 
Drives: ZL1, 2013, tri-coat-red, manual
Join Date: Nov 2013
Location: Michigan
Posts: 1,663
Quote:
Originally Posted by DerrickG View Post
Just wondering if anyone has had this similar issue and what it could be. So my 2013 ZL1 is leaning to the left. On the driver side there is hardly any clearance between the fender and the wheels and I can barely fit my hand between. On the passenger side there is more than enough, atleast 2 more inches of clearance compared to the driver side and I can fit my hand in no problem. Car still drives like normal but looks a little off as it looks lowered on one side. Any thoughts?
Spring or shock..
ZMEnow is offline   Reply With Quote
 
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:22 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2025, vBulletin Solutions, Inc.