WTB: LS3 intake w/ rails and injectors, coils? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

frijolee · 12-19-2016, 12:41 PM

Hi fellas,

I just picked up an LS3 stroker long block for an FJ40 crawler project and I need some intake parts to complete it. Figured this was the place to be.

I'm looking for an LS3 intake complete, without throttle body (I'll be running cable). I would like it with fuel rail and injectors, beauty cover and sound deadening if possible.

Best deal I've seen recently was $200 shipped.
http://www.camaro5.com/forums/showthread.php?t=474757

I'm comfortable at $250 shipped (to 92780 if that matters) assuming it's complete and free of issues. I can tack on a bit more for larger injectors but 60 lb/hr is as big as I'd go (stock LS3 should be ok, but LSA injectors would give me a bit of head room).

I could also be interested in coil packs, brackets, and coil harnesses. I was planning to run the truck packs with heat sinks but I haven't bought them yet. if I can score a combo deal with the intake that might be interesting.

Note, since I don't have a Camaro, I'm not a regular here and the best way to get a hold of me is via email at "bringthepaynes at gmail dot com."

Thanks
Joel Payne

frijolee · 12-29-2016, 08:26 PM

Still looking

lxinms · 12-30-2016, 08:04 AM

From an individual, you might find one for $300 plus shipping, and that might not have hardware or a MAF sensor. That $200 one you used as an example was way under the norm.

frijolee · 01-03-2017, 02:30 PM

You always see the best deal you missed right? I have seen more than a handful go for the $250 I'm offering at the moment. Hell, just missed another with Holley billet fuel rails (no injectors) that went for $250 shipped.

Obviously, open to offers if folks have them.

hou30guy · 01-04-2017, 06:44 AM

I have new coils the trk style one, the round ones they give off more juice for sale

frijolee · 01-04-2017, 07:20 PM

Thanks all for the offers,

I have agreements with a few folks on everything I was looking for and so I should be set for now, but will chime back up if anything falls through.

-Joel

SS PANTHER · 01-05-2017, 03:13 AM

I have a complete setup and I live in La Canada, about an hour drive from you, with no traffic, of course. I would be willing to remove the TB and reduce the price to $275. http://www.camaro5.com/forums/showthread.php?t=464935

12-19-2016, 12:41 PM	#1
frijolee Drives: 90 RX7 w/ LS2, 72 FJ40 w/ LS3 Join Date: Dec 2016 Location: Tustin, CA Posts: 4	WTB: LS3 intake w/ rails and injectors, coils? Hi fellas, I just picked up an LS3 stroker long block for an FJ40 crawler project and I need some intake parts to complete it. Figured this was the place to be. I'm looking for an LS3 intake complete, without throttle body (I'll be running cable). I would like it with fuel rail and injectors, beauty cover and sound deadening if possible. Best deal I've seen recently was $200 shipped. http://www.camaro5.com/forums/showthread.php?t=474757 I'm comfortable at $250 shipped (to 92780 if that matters) assuming it's complete and free of issues. I can tack on a bit more for larger injectors but 60 lb/hr is as big as I'd go (stock LS3 should be ok, but LSA injectors would give me a bit of head room). I could also be interested in coil packs, brackets, and coil harnesses. I was planning to run the truck packs with heat sinks but I haven't bought them yet. if I can score a combo deal with the intake that might be interesting. Note, since I don't have a Camaro, I'm not a regular here and the best way to get a hold of me is via email at "bringthepaynes at gmail dot com." Thanks Joel Payne

12-29-2016, 08:26 PM	#2
frijolee Drives: 90 RX7 w/ LS2, 72 FJ40 w/ LS3 Join Date: Dec 2016 Location: Tustin, CA Posts: 4	Still looking

12-30-2016, 08:04 AM	#3
lxinms Drives: 2001 Camaro SS & 2005 Canyon ZQ8 Join Date: Apr 2014 Location: TX Posts: 150	From an individual, you might find one for $300 plus shipping, and that might not have hardware or a MAF sensor. That $200 one you used as an example was way under the norm.

01-03-2017, 02:30 PM	#4
frijolee Drives: 90 RX7 w/ LS2, 72 FJ40 w/ LS3 Join Date: Dec 2016 Location: Tustin, CA Posts: 4	You always see the best deal you missed right? I have seen more than a handful go for the $250 I'm offering at the moment. Hell, just missed another with Holley billet fuel rails (no injectors) that went for $250 shipped. Obviously, open to offers if folks have them.

01-04-2017, 06:44 AM	#5
hou30guy Drives: 2011 convertible 2ss/rs Join Date: Sep 2015 Location: Houston Posts: 971	I have new coils the trk style one, the round ones they give off more juice for sale

01-04-2017, 07:20 PM	#6
frijolee Drives: 90 RX7 w/ LS2, 72 FJ40 w/ LS3 Join Date: Dec 2016 Location: Tustin, CA Posts: 4	Thanks all for the offers, I have agreements with a few folks on everything I was looking for and so I should be set for now, but will chime back up if anything falls through. -Joel

01-05-2017, 03:13 AM	#7
SS PANTHER Drives: 2013 SS Supercharged Convertible Join Date: May 2013 Location: SoCal Posts: 2,713	I have a complete setup and I live in La Canada, about an hour drive from you, with no traffic, of course. I would be willing to remove the TB and reduce the price to $275. http://www.camaro5.com/forums/showthread.php?t=464935