You are browsing camaro5 
 |
|
02-11-2017, 04:57 PM
|
#1 |
|
Humble
Drives: 2010 Camaro SS Join Date: Dec 2016
Location: Saint Louis
Posts: 84
|
Stripe Removal
I have browsed around and wanted to see if I could get e clearer answer for the impression that's left behind on the hood and truck and spoiler of the car when the stripes are removed. I have a white/ orange stripes and want to remove the stripes they been on the life of the car 2010 and I know the orange stripes will leave a impressison. My question would be the best way to get that impression gone? I want to remove the stripes but also don't want it looking like a egg white. Any advice is appreciated and I have searched form but couldn't find a clear answer on the left over if we have a post on this I would gladly delete and go to that thank you!
|
|
|
|
02-11-2017, 06:42 PM
|
#2 | |
|
Tri-County Camaro SWFL
Drives: 2013 IOM 2SS/RS/1LE Join Date: Apr 2013
Location: South West FL
Posts: 3,630
|
Quote:
__________________
|
|
|
|
|
|
02-11-2017, 09:25 PM
|
#3 |
 
Drives: 2012 SS L99 Converible Join Date: Mar 2016
Location: New Washington, Ohio
Posts: 606
|
Wet sand and buff is the only way. I took my stripes off my camaro
|
|
|
|
|
02-12-2017, 12:56 AM
|
#4 |
          
Drives: 2015 Summit White 2SS 1LE Join Date: Feb 2012
Location: Vance Alabama
Posts: 8,112
|
The paint under the stripes have been protected where as the rest has not.
__________________
Retired wanna be cylinder head porter
2015 2SS 1LE Clutch reservoir, Vararam DRX, ported TB, TSP 2" headers, MGW shifter, stage 4 cam and Wilkes 11° 65cc heads Totalled: 2010 1SS Wilkes Performance/Eagle 416 shortblock, TSP custom valvetrain, PRC 260 heads, Edelbrock Pro Flo 102, th400 swap, 8" PTC 5500 stall= 535/435 at the wheels tuned Gen 3 Performance and Dyno 10.97 @ 124 full weight in 3100 DA CamaroFest X |
|
|
|
|
02-12-2017, 08:14 AM
|
#5 | |
Drives: 2010 CGM 2SS/RS LS3 Swapped A6 Join Date: Sep 2016
Location: Spring Hill, FL
Posts: 4,737
|
Quote:
I had to stop 20 seconds after I began. The paint under the stripes was shadowed much darker than my OEM Cyber Gray. So now I am doomed to forever having side stripes. Although I am getting them removed and replaced with a different color scheme.
__________________
2010 CGM Camaro 2SS LS3 Swapped A6 - GPI LS3 SS1 .647/.638, (224/237, 112 +4, 7º overlap) on CamMotion 8620 core, BTR Platinum .660" Dual Spring kit w/titanium retainers, CHE bronze trunnion upgrade, stock heads milled @ .015, Melling HV 10296 oil pump, TSP 1-7/8" long tube headers (W/Catless Off-road Pipes), Corsa Xtreme 3" Catback, GPI Ported/Rod Mod Intake, Stage 2 Ported Throttle Body, Vararam OTR CAI, Mike Norris Gen 2 catch can + GM 1LE clean side separator, 160º thermostat - Megan Racing adjustable coilovers (lowered 1.75"), MRR M017 10/11" wheels-Tuned by Ryan @ GPI
|
|
|
|
|
|
02-15-2017, 09:58 PM
|
#6 |
|
Humble
Drives: 2010 Camaro SS Join Date: Dec 2016
Location: Saint Louis
Posts: 84
|
Okay thanks guys sorry for posting in wrong section I'm going to plasti dip the whole hood black anyway but I heard that it comes off just leave Impression and have to clay bar and buff out
|
|
|
|
|
|
|
|
 |
|
|
