![]() |
|
|
#1 |
![]() Drives: 2012 2LT RS White Born: 11/10/11 Join Date: Nov 2011
Location: Florida
Posts: 313
|
Dynomax VT
So I finally decide to buy a Dynomax VT axle back system (# 38493) only to find out the official status from Dynomax is: back ordered for an indefinite amount of time. And it appears that no vendors have it in stock, which makes sense because they all just drop ship from Dynomax. I even called Jegs to see if they had one warehoused somewhere since they are so large and they don't. And other vendors just show it as unavailable.
I know that is might be possible to just order the mufflers (53780 & 53781) but has anyone done that and had success? I guess I might just have to put my trust in a good muffler shop. It does appear that 53780 and 53781 come with the tips and very back hangers so it would just be a matter of matching up what's left after cutting off the stock suitcases to 53780/53781 and getting the other hanger towards the rear end to work. Any other ideas would be appreciated.
__________________
*Grey Hockey Stripes; Heritage Grill; GM GFX - Unpainted Argent Gray; GM Dovetail Spoiler; Rivercity Creations custom painted rear bowtie, RS & Taillight Bezels; MRR M017 Graphite Wheels; Nitto NT555 G2; ACS 4Teen Heat Extractor
*RX Catch Can;CAI; MF Exhaust; VMAX CNC Spiral Ported TB; Overkill Stage 1 Supercharger System; Hotchkis Comp Sway Bar Set w/ End Links, Cadillac CTSV 4 Piston Brembos on all corners with SS Black Hat Rotors Youtube Channel - HPDE Driving Videos https://www.youtube.com/channel/UCpO...8aw6hgX3O1Uh7A |
|
|
|
|
|
#2 |
|
Account Suspended
Drives: 2013 1LT RS Camaro Join Date: Apr 2016
Location: Southeast Michigan
Posts: 3,494
|
I bumped up the LFX exhaust thread for you. Checkout Ppriyam, he put the DynoMaxx VT's on his car and has the website and part numbers he used. Post number 20, page Two. Good luck!
|
|
|
|
|
|
#3 |
![]() Drives: 2012 2LT RS White Born: 11/10/11 Join Date: Nov 2011
Location: Florida
Posts: 313
|
Wow. Trying to find even these parts are a pain the ... The vendor in that post #20 that Ppriyam used, who is well know of course, shows them as unavailable. I just chatted with Jegs who told me that they show a date of later this month, but I'd be lucky if they showed up at all. Apparently getting parts out of Dynomax has been difficult for them and it's just not these parts for the Camaro. So I'll keep checking around and call Dynomax directly if I need to.
__________________
*Grey Hockey Stripes; Heritage Grill; GM GFX - Unpainted Argent Gray; GM Dovetail Spoiler; Rivercity Creations custom painted rear bowtie, RS & Taillight Bezels; MRR M017 Graphite Wheels; Nitto NT555 G2; ACS 4Teen Heat Extractor
*RX Catch Can;CAI; MF Exhaust; VMAX CNC Spiral Ported TB; Overkill Stage 1 Supercharger System; Hotchkis Comp Sway Bar Set w/ End Links, Cadillac CTSV 4 Piston Brembos on all corners with SS Black Hat Rotors Youtube Channel - HPDE Driving Videos https://www.youtube.com/channel/UCpO...8aw6hgX3O1Uh7A Last edited by Silent...; 02-09-2017 at 09:15 PM. |
|
|
|
|
|
#4 | |
![]() Drives: 2015 Camaro LT Join Date: Sep 2016
Location: Fox Lake, IL
Posts: 393
|
Quote:
|
|
|
|
|
|
|
#5 |
|
Account Suspended
Drives: 2013 1LT RS Camaro Join Date: Apr 2016
Location: Southeast Michigan
Posts: 3,494
|
|
|
|
|
|
|
#6 |
![]() Drives: 2012 2LT RS White Born: 11/10/11 Join Date: Nov 2011
Location: Florida
Posts: 313
|
The same date shows for Jegs but they told me I'd be lucky if the parts showed at all. So that why I said I will be calling Dynomax directly today to get down to the bottom of this.
__________________
*Grey Hockey Stripes; Heritage Grill; GM GFX - Unpainted Argent Gray; GM Dovetail Spoiler; Rivercity Creations custom painted rear bowtie, RS & Taillight Bezels; MRR M017 Graphite Wheels; Nitto NT555 G2; ACS 4Teen Heat Extractor
*RX Catch Can;CAI; MF Exhaust; VMAX CNC Spiral Ported TB; Overkill Stage 1 Supercharger System; Hotchkis Comp Sway Bar Set w/ End Links, Cadillac CTSV 4 Piston Brembos on all corners with SS Black Hat Rotors Youtube Channel - HPDE Driving Videos https://www.youtube.com/channel/UCpO...8aw6hgX3O1Uh7A |
|
|
|
|
|
#7 |
![]() Drives: 2012 2LT RS White Born: 11/10/11 Join Date: Nov 2011
Location: Florida
Posts: 313
|
I finally got a straight answer from Dynomax. They are discontinuing the entire VT line, therefore the complete kit and even the 53780/53781 are not available and won't be.
I could try to find just the mufflers, without hangers, but there is a reason they are discontinuing them. So for those who already have them, I wish you the best of luck.
__________________
*Grey Hockey Stripes; Heritage Grill; GM GFX - Unpainted Argent Gray; GM Dovetail Spoiler; Rivercity Creations custom painted rear bowtie, RS & Taillight Bezels; MRR M017 Graphite Wheels; Nitto NT555 G2; ACS 4Teen Heat Extractor
*RX Catch Can;CAI; MF Exhaust; VMAX CNC Spiral Ported TB; Overkill Stage 1 Supercharger System; Hotchkis Comp Sway Bar Set w/ End Links, Cadillac CTSV 4 Piston Brembos on all corners with SS Black Hat Rotors Youtube Channel - HPDE Driving Videos https://www.youtube.com/channel/UCpO...8aw6hgX3O1Uh7A |
|
|
|
|
|
#8 |
![]() Drives: 2015 Camaro LT Join Date: Sep 2016
Location: Fox Lake, IL
Posts: 393
|
Ouch. I had these on my list too. Did they give you the reason for the discontinuation? Maybe they have a new and improved model on the way or something.
|
|
|
|
|
|
#9 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2017 ZL1 A10 & 2021 BMW M340i x Dr Join Date: Mar 2009
Location: Tampa
Posts: 5,111
|
so, did they say why they are dropping the line? Had them on my car for nearly 5 years now(100k miles)
__________________
Sold 2012 2LT RS 12.3@112 old setup
Sold 1967 Camaro Pro Street. Ran 10's mild BB on NOS. 2017 HyperBlue ZL1 A10 ** Born 3/17/17**Delivered 4/08/17 2020 Build: Mag2650, BTR Stage2, NW103, BG, 14% lower, 90mm upper, ARH 2" Long system w/no cats, SW Legend mufflers. **807hp/762tq on 93 gas** and **848hp/792tq on e47** Sold 2018 (Go Mango) Dodge Charger Daytona 392 Daily Driver Daily Driver 2021 BMW M340i Xdrive |
|
|
|
|
|
#10 |
![]() Drives: 2015 Camaro LT Join Date: Sep 2016
Location: Fox Lake, IL
Posts: 393
|
It looks like ebay has (2) left of each model, the 53780 and the 53781.
|
|
|
|
|
|
#11 |
![]() Drives: 2012 2LT RS White Born: 11/10/11 Join Date: Nov 2011
Location: Florida
Posts: 313
|
They directed me to the Ultraflow line. They didn't say why.
My guess would be warranty issues didn't allow the line to be profitable. So I'm not going too take a chance since the warranty wouldn't be worth anything.
__________________
*Grey Hockey Stripes; Heritage Grill; GM GFX - Unpainted Argent Gray; GM Dovetail Spoiler; Rivercity Creations custom painted rear bowtie, RS & Taillight Bezels; MRR M017 Graphite Wheels; Nitto NT555 G2; ACS 4Teen Heat Extractor
*RX Catch Can;CAI; MF Exhaust; VMAX CNC Spiral Ported TB; Overkill Stage 1 Supercharger System; Hotchkis Comp Sway Bar Set w/ End Links, Cadillac CTSV 4 Piston Brembos on all corners with SS Black Hat Rotors Youtube Channel - HPDE Driving Videos https://www.youtube.com/channel/UCpO...8aw6hgX3O1Uh7A |
|
|
|
|
|
#12 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2017 ZL1 A10 & 2021 BMW M340i x Dr Join Date: Mar 2009
Location: Tampa
Posts: 5,111
|
If i ever have to change mine again, i would probably go with Solo J pipes.
__________________
Sold 2012 2LT RS 12.3@112 old setup
Sold 1967 Camaro Pro Street. Ran 10's mild BB on NOS. 2017 HyperBlue ZL1 A10 ** Born 3/17/17**Delivered 4/08/17 2020 Build: Mag2650, BTR Stage2, NW103, BG, 14% lower, 90mm upper, ARH 2" Long system w/no cats, SW Legend mufflers. **807hp/762tq on 93 gas** and **848hp/792tq on e47** Sold 2018 (Go Mango) Dodge Charger Daytona 392 Daily Driver Daily Driver 2021 BMW M340i Xdrive |
|
|
|
|
|
#13 |
|
Account Suspended
Drives: 2013 1LT RS Camaro Join Date: Apr 2016
Location: Southeast Michigan
Posts: 3,494
|
Bummer, love mine and would have put them on any other performance vehicle I purchased.
|
|
|
|
|
|
#14 |
|
Account Suspended
Drives: Camaro V6 Join Date: Oct 2016
Location: U.S.
Posts: 1,722
|
Sounded like a recipe for disaster. Spring loaded flaps inside the sealed muffler housing? Definitely NOT a good idea from a warranty standpoint.
|
|
|
|
|
|
|
|
![]() |
|
|