You are browsing camaro5 
 |
|
08-24-2017, 05:25 AM
|
#1 |
   
|
for sale rear gforce axle 850 HP for camaro 2010+ - $825
Hello I purchased these in 2012 from a camaro5 member, and sent these out to Gforce to have them inspected and rebuilt if needed. I had plans to install them on my camaro, but never did. They have a life time warranty. I'm asking $825.00 plus shipping. I've attached the original conversation with the original owner when I purchased them. Thanks
__________________
2012 zl1 stock 7000 miles
2010 TVS2300, BTR cam PD stage 3, ID1050 injectors, CHE bronze trunnions, 7.400" pushrods,.660" lift platinum springs, Titanium ret, Zl1 fuel pump, Kooks LT headers, High flow cats, Roto Fab CAI, Corsa exh., Mellings oil pump, HD chain, ls2 damper, all synthetic, BMR control arms, zl1 toe link, BMR cradle mounts, W/bottle relocation, air scoop deflector, Hennessy wheels, two piece rotor, morimoto fogs, DRL harness, coilovers, Heads up install, mgw shifter, slps splitter, slp spoiler, zl1 side skirts, painted strips, debadged, tinted, 2018 emblems. Edit Signature Last edited by lionssfan; 11-01-2017 at 05:29 AM. |
|
|
|
09-04-2017, 02:02 PM
|
#2 |
 Drives: 2015 Camaro 1LE Join Date: Mar 2014
Location: Columbus, GA
Posts: 230
|
Still have the axles?
__________________
2015 1SS 1LE: BTR Stage 5 N/A cam, 1 7/8 Longtube headers, catless connectors, Z/28 Cold Air Intake, Vararam Power Wedge.
Upcoming Mods: GPI Ported heads GPI Ported Rodmod intake ZL1 Injectors DSX E-85 Flex Fuel Kit |
|
|
|
|
09-04-2017, 02:22 PM
|
#3 |
|
|
Yes I still have the rear axles
__________________
2012 zl1 stock 7000 miles
2010 TVS2300, BTR cam PD stage 3, ID1050 injectors, CHE bronze trunnions, 7.400" pushrods,.660" lift platinum springs, Titanium ret, Zl1 fuel pump, Kooks LT headers, High flow cats, Roto Fab CAI, Corsa exh., Mellings oil pump, HD chain, ls2 damper, all synthetic, BMR control arms, zl1 toe link, BMR cradle mounts, W/bottle relocation, air scoop deflector, Hennessy wheels, two piece rotor, morimoto fogs, DRL harness, coilovers, Heads up install, mgw shifter, slps splitter, slp spoiler, zl1 side skirts, painted strips, debadged, tinted, 2018 emblems. Edit Signature |
|
|
|
|
09-05-2017, 03:16 PM
|
#4 |
|
Drives: 2015 Camaro 1LE Join Date: Mar 2014
Location: Columbus, GA
Posts: 230
|
Sent you a PM
__________________
2015 1SS 1LE: BTR Stage 5 N/A cam, 1 7/8 Longtube headers, catless connectors, Z/28 Cold Air Intake, Vararam Power Wedge.
Upcoming Mods: GPI Ported heads GPI Ported Rodmod intake ZL1 Injectors DSX E-85 Flex Fuel Kit |
|
|
|
|
09-08-2017, 04:09 PM
|
#5 |
|
|
Thanks but not interested in your exhaust system
__________________
2012 zl1 stock 7000 miles
2010 TVS2300, BTR cam PD stage 3, ID1050 injectors, CHE bronze trunnions, 7.400" pushrods,.660" lift platinum springs, Titanium ret, Zl1 fuel pump, Kooks LT headers, High flow cats, Roto Fab CAI, Corsa exh., Mellings oil pump, HD chain, ls2 damper, all synthetic, BMR control arms, zl1 toe link, BMR cradle mounts, W/bottle relocation, air scoop deflector, Hennessy wheels, two piece rotor, morimoto fogs, DRL harness, coilovers, Heads up install, mgw shifter, slps splitter, slp spoiler, zl1 side skirts, painted strips, debadged, tinted, 2018 emblems. Edit Signature |
|
|
|
|
09-18-2017, 03:24 AM
|
#6 |
|
|
Back from vacation
__________________
2012 zl1 stock 7000 miles
2010 TVS2300, BTR cam PD stage 3, ID1050 injectors, CHE bronze trunnions, 7.400" pushrods,.660" lift platinum springs, Titanium ret, Zl1 fuel pump, Kooks LT headers, High flow cats, Roto Fab CAI, Corsa exh., Mellings oil pump, HD chain, ls2 damper, all synthetic, BMR control arms, zl1 toe link, BMR cradle mounts, W/bottle relocation, air scoop deflector, Hennessy wheels, two piece rotor, morimoto fogs, DRL harness, coilovers, Heads up install, mgw shifter, slps splitter, slp spoiler, zl1 side skirts, painted strips, debadged, tinted, 2018 emblems. Edit Signature |
|
|
|
|
09-20-2017, 03:19 PM
|
#7 |
|
|
Thanks but 500.00 is to low
__________________
2012 zl1 stock 7000 miles
2010 TVS2300, BTR cam PD stage 3, ID1050 injectors, CHE bronze trunnions, 7.400" pushrods,.660" lift platinum springs, Titanium ret, Zl1 fuel pump, Kooks LT headers, High flow cats, Roto Fab CAI, Corsa exh., Mellings oil pump, HD chain, ls2 damper, all synthetic, BMR control arms, zl1 toe link, BMR cradle mounts, W/bottle relocation, air scoop deflector, Hennessy wheels, two piece rotor, morimoto fogs, DRL harness, coilovers, Heads up install, mgw shifter, slps splitter, slp spoiler, zl1 side skirts, painted strips, debadged, tinted, 2018 emblems. Edit Signature |
|
|
|
|
09-20-2017, 05:55 PM
|
#8 |
|
Trouble_SM
Drives: 17' Summit White ZL1 Join Date: Jan 2015
Location: Midlothian, TX
Posts: 450
|
pm sent.
|
|
|
|
|
09-27-2017, 01:46 PM
|
#9 |
|
|
Pm sent $775.00 plus shipping. Approx shipping $51.00
__________________
2012 zl1 stock 7000 miles
2010 TVS2300, BTR cam PD stage 3, ID1050 injectors, CHE bronze trunnions, 7.400" pushrods,.660" lift platinum springs, Titanium ret, Zl1 fuel pump, Kooks LT headers, High flow cats, Roto Fab CAI, Corsa exh., Mellings oil pump, HD chain, ls2 damper, all synthetic, BMR control arms, zl1 toe link, BMR cradle mounts, W/bottle relocation, air scoop deflector, Hennessy wheels, two piece rotor, morimoto fogs, DRL harness, coilovers, Heads up install, mgw shifter, slps splitter, slp spoiler, zl1 side skirts, painted strips, debadged, tinted, 2018 emblems. Edit Signature |
|
|
|
|
09-27-2017, 08:59 PM
|
#10 |
       
Drives: 2011 Camaro 2Ss M6 Join Date: Dec 2011
Location: Southern California
Posts: 4,013
|
Im curious.. You keep specifying "Rear Axles". Do they make a Front pair as well? Where can I find those?
|
|
|
|
|
09-28-2017, 07:47 AM
|
#11 |
|
Drives: G8 Join Date: Mar 2012
Location: NJ
Posts: 254
|
I don't blame him. Never under estimate the stupidity of the internet.
Sent from my Pixel XL using Tapatalk |
|
|
|
|
11-01-2017, 05:30 AM
|
#12 |
|
|
responded back thank you
__________________
2012 zl1 stock 7000 miles
2010 TVS2300, BTR cam PD stage 3, ID1050 injectors, CHE bronze trunnions, 7.400" pushrods,.660" lift platinum springs, Titanium ret, Zl1 fuel pump, Kooks LT headers, High flow cats, Roto Fab CAI, Corsa exh., Mellings oil pump, HD chain, ls2 damper, all synthetic, BMR control arms, zl1 toe link, BMR cradle mounts, W/bottle relocation, air scoop deflector, Hennessy wheels, two piece rotor, morimoto fogs, DRL harness, coilovers, Heads up install, mgw shifter, slps splitter, slp spoiler, zl1 side skirts, painted strips, debadged, tinted, 2018 emblems. Edit Signature |
|
|
|
|
11-04-2017, 01:37 AM
|
#13 |
|
|
Back up for sale buyer backed out
__________________
2012 zl1 stock 7000 miles
2010 TVS2300, BTR cam PD stage 3, ID1050 injectors, CHE bronze trunnions, 7.400" pushrods,.660" lift platinum springs, Titanium ret, Zl1 fuel pump, Kooks LT headers, High flow cats, Roto Fab CAI, Corsa exh., Mellings oil pump, HD chain, ls2 damper, all synthetic, BMR control arms, zl1 toe link, BMR cradle mounts, W/bottle relocation, air scoop deflector, Hennessy wheels, two piece rotor, morimoto fogs, DRL harness, coilovers, Heads up install, mgw shifter, slps splitter, slp spoiler, zl1 side skirts, painted strips, debadged, tinted, 2018 emblems. Edit Signature |
|
|
|
|
11-04-2017, 01:59 AM
|
#14 |
Drives: Savitar; The 500rwhp N/A Monster! Join Date: Aug 2016
Location: Middletown, Ohio
Posts: 2,914
|
Why don't you reply to their PM instead of coming back here to reply?
__________________
*SOLD*504HP/433TQ | Night Fury cammed Cold Air Inductions intake Bo White ported TB Speed Engineering 1 7/8 longtubes NPP catback QTP low profile cutouts Powerbond 25% UDP 3.73 gears JRE scoop ZL1 grille R1 Concepts drilled/slotted rotors built/tuned by Weapon X Motorsports
|
|
|
|
|
|
|
|
 |
|
|
