Interior question - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Sinister10 · 11-03-2018, 11:01 AM

Found a good deal on a complete set (front and rear) of ZL1 seats. They are out of a 2014 and was wondering if they will bolt in my 2010 2SS/RS without issue.

Overflow · 11-03-2018, 11:22 AM

Rear seats will fit. Only a few bolts hold the rear seats in so the hardest part will be squeezing back there.

I can't see why the ZL1 front seats wouldn't fit. Worse comes to worse you have to buy ZL1 seat rails.

Sinister10 · 11-03-2018, 02:58 PM

Seats have rails installed. I am more concerned about the power and heated stuff. Will the power and heat still work? And will it just plug into my factory harness.

FrankNstein1 · 11-04-2018, 10:52 PM

I have explored upgrading to Recaros for my 2010 and found the harness is compatible with 2011+
Should be able to make it work with the wires in hand, maybe some creative splicing or expert help. I don’t have the money for the seats right now, so it’s all speculation.
Good luck.

Starfall · 11-05-2018, 12:35 AM

Quote:

Originally Posted by Sinister10

Found a good deal on a complete set (front and rear) of ZL1 seats. They are out of a 2014 and was wondering if they will bolt in my 2010 2SS/RS without issue.

I have a 2010 v6 and did a little exploration on aftermarket seating, and i do believe i seen somewhere that 2014 zl1’s will work with older models, but mine doesn’t have the heated seating and stuff so i don’t know about that

11-03-2018, 11:01 AM	#1
Sinister10 Drives: 2010 Camaro SS Join Date: Jul 2018 Location: Indiana Posts: 543	Interior question Found a good deal on a complete set (front and rear) of ZL1 seats. They are out of a 2014 and was wondering if they will bolt in my 2010 2SS/RS without issue. __________________ 2010 2SS/RS 6M, MGW flatstick, CAI cold air intake, SLP loudmouth 2 axleback, TSP 1 7/8 headers w/ hfc, pfadt 1" springs, SRP pedals, emblempros "6.2L" emblems on hood, ZL1 grill, M/T SC-5 wheels, nitto motivo 275f 315r. ZL1 addons wickerbill, smoked lenses, resonator delete x pipe, diode dynamics DRLs 1LE suede steering wheel, mighty mouse CC. SCTX4 and Dyno Steve tune.

11-03-2018, 02:58 PM	#3
Sinister10 Drives: 2010 Camaro SS Join Date: Jul 2018 Location: Indiana Posts: 543	Seats have rails installed. I am more concerned about the power and heated stuff. Will the power and heat still work? And will it just plug into my factory harness. __________________ 2010 2SS/RS 6M, MGW flatstick, CAI cold air intake, SLP loudmouth 2 axleback, TSP 1 7/8 headers w/ hfc, pfadt 1" springs, SRP pedals, emblempros "6.2L" emblems on hood, ZL1 grill, M/T SC-5 wheels, nitto motivo 275f 315r. ZL1 addons wickerbill, smoked lenses, resonator delete x pipe, diode dynamics DRLs 1LE suede steering wheel, mighty mouse CC. SCTX4 and Dyno Steve tune.

11-04-2018, 10:52 PM	#4
FrankNstein1 Drives: 2010 Camaro SS RS Join Date: Jul 2017 Location: Fort Wayne, IN Posts: 16	I have explored upgrading to Recaros for my 2010 and found the harness is compatible with 2011+ Should be able to make it work with the wires in hand, maybe some creative splicing or expert help. I don’t have the money for the seats right now, so it’s all speculation. Good luck. __________________ Kooks LTH, Haltech CAI, cam, tune, MGW shifter, HRE FF01 wheels

11-03-2018, 11:22 AM	#2
Overflow Space Shuttle Aficionado Drives: 2016 Camaro 2SS Join Date: Jun 2010 Location: Tampa, FL Posts: 30,897 View My Garage	Rear seats will fit. Only a few bolts hold the rear seats in so the hardest part will be squeezing back there. I can't see why the ZL1 front seats wouldn't fit. Worse comes to worse you have to buy ZL1 seat rails.