The Driveshaft Shop l 2010-15 SS Driveshaft l JDP Motorsports

[JDP Sales]

Hey Camaro5!

Here at JDP Motorsports we are excited to offer The Driveshaft Shop driveshafts for the 2010-15 Camaro SS!

The Driveshaft Shop 3 1/2" Aluminum 1 Piece Driveshaft (GMCA10-A)



The Driveshaft Shop 3.5" aluminum 1 piece driveshaft for the 2010-2015 Camaro SS features their signature billet plates for each end and 300m stub system mounted into a billet aluminum plate for a strong lightweight design.

NOTE: You will have to remove the heat shield from above center hanger mount to install a 3-1/2" shaft. There is a possibility of clearance issues with aftermarket exhaust systems.

BILLET PLATE VS PINION YOKES:
The billet plates are machined on center and the flanges mount at a larger diameter and pilot making it better than any u-bolt style yoke.With the plate and flange, The Driveshaft Shop has been able to get a more concentric center line. The flanges hold true no matter how many times they are re-mounted.

NOTE: Please allow 4 weeks for build time.

Sales Price: $944.99

The Driveshaft Shop 3 1/2" Aluminum 1 Piece Driveshaft (GMCA11-A)



The Driveshaft Shop 3 1/2" aluminum 1 piece driveshaft for the 2010-2015 Camaro SS with an auto transmission features their signature billet plates for each end and a 300m stub system mounted into a billet aluminum plate for a strong lightweight design.

NOTE: You will have to remove the heat shield from above center hanger mount to install a 3-1/2" shaft. There is a possibility of clearance issues with aftermarket exhaust systems.

BILLET PLATE VS PINION YOKES:
The billet plates are machined on center and the flanges mount at a larger diameter and pilot making it better than any u-bolt style yoke.With the plate and flange, The Driveshaft Shop has been able to get a more concentric center line. The flanges hold true no matter how many times they are re-mounted.

NOTE: Please allow 4 weeks for build time.

Sales Price: $944.99

The Driveshaft Shop 3 3/8" Carbon Fiber Driveshaft (GMCA10-C)



The Driveshaft Shop 3 3/8" carbon fiber driveshaft for the 2010-2015 Camaro SS with a manual transmission features their bond technology and special 30 spline ends for a strong lightweight design.

BILLET PLATE VS PINION YOKES:
The billet plates are machined on center and the flanges mount at a larger diameter and pilot making it better than any u-bolt style yoke.With the plate and flange, The Driveshaft Shop has been able to get a more concentric center line. The flanges hold true no matter how many times they are re-mounted.

NOTE: Please allow 4 weeks for build time.

Sales Price: $1,469.99

The Driveshaft Shop 3 3/8" Carbon Fiber Driveshaft (GMCA11-C)



The Driveshaft Shop 3 3/8" carbon fiber driveshaft for the 2010-2015 Camaro SS with an auto transmission features their bond technology and special 30 spline ends for a strong lightweight design. This shaft weighs just 15.5lbs.

BILLET PLATE VS PINION YOKES:
The billet plates are machined on center and the flanges mount at a larger diameter and pilot making it better than any u-bolt style yoke.With the plate and flange, The Driveshaft Shop has been able to get a more concentric center line. The flanges hold true no matter how many times they are re-mounted.

NOTE: Please allow 4 weeks for build time.

Sales Price: $1,469.99

WE INSTALL PARTS!!

If you are looking to have work performed or have one of our packages installed on your vehicle, we have a facility in Sandy, Utah where we perform everything from bolt-on installations, Dyno testing/tuning and complete race car builds. Our install shop fills up fast, so please call us to set up an appointment. Our expert staff is eager to assist you. We appreciate your interest in our products and have a great day!

Cheers,

Kayla L.
801.545.4215
Sales@jdpmotorsports.com