Dynomax - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

bluecamaroguy · 08-07-2009, 08:08 PM

Got a full catback Dynomax put on today. We took off the H-pipe and put on an X-pipe and left out the resonators. New tips were put on also.

We tried Flowmaster and Dynomax (Magnaflow was an option but it wasn't a chambered exhaust so we didn't want to lose performance). Flowmaster sounded the loudest and sounded great in the low RPMs. But when we pushed it, it got reallllly raspy like a ricer.

The Dynomax was quieter than the Flowmaster but this made it not so raspy. That is why I went with Dynomax. It sounds 100% better than stock. I'm very glad with my decision.

p.s. Those stock mufflers are freakin huge. Sorry I forgot to take pics up at the bottom of the car when I was down in the pit.

Stock

New Tips

scrming · 08-07-2009, 08:13 PM

very cool... and good info!

Now lets see some viddys!!! LOL

BigBOSS · 08-07-2009, 08:25 PM

Dynomax Resonators are like $40 aren't they?

bluecamaroguy · 08-07-2009, 08:30 PM

No idea but we didn't put them on. You could be right though. I'll try to get a video up this weekend or next at the latest. Also, I am pretty sure this improved my gas mileage.

BigBOSS · 08-07-2009, 08:33 PM

The new tips look amazing as well. 2.5 inch Inlet / 3.5 inch Outlet?

scrming · 08-07-2009, 08:50 PM

Quote:

Originally Posted by bluecamaroguy

No idea but we didn't put them on. You could be right though. I'll try to get a video up this weekend or next at the latest. Also, I am pretty sure this improved my gas mileage.

I would not be surprised at all if you improved your MPG...

bluecamaroguy · 08-07-2009, 10:14 PM

Quote:

Originally Posted by BigBOSS

The new tips look amazing as well. 2.5 inch Inlet / 3.5 inch Outlet?

Yep the stock pipes go from 2.5" down to 2.25" after they pass the H. On the X-pipe ones we put on we kept it 2.5" straight through. Your correct the tips are 3.5." The GM aftermarket tips I think are 3.75."

Quote:

Originally Posted by scrming

I would not be surprised at all if you improved your MPG...

I guess I didn't realize it would improve MPG. I knew about performance improvements. I just don't know very much about cars. But I am learning

I would definitely recommend Ed Hanson's Muffler Service if anyone is in the San Diego area. They were VERY nice and definitely knew what they were doing. It was a 100+ mile trip back to my house from the shop so I had a lot of time to test out the sound. Don't get me wrong, it is still a bit raspy, it is a V6 afterall. But I'm completely satisfied.

ckaram · 08-08-2009, 08:18 AM

Post some vids!

calflan · 08-10-2009, 03:13 PM

What model Dynomax did you use. Was it the Dynomax 24238 Ultra Flo Welded Muffler Resonator ?

08-07-2009, 08:08 PM	#1
bluecamaroguy Drives: 2010 2LT/RS ABM! Join Date: May 2009 Location: san diego Posts: 254 View My Garage	Dynomax Got a full catback Dynomax put on today. We took off the H-pipe and put on an X-pipe and left out the resonators. New tips were put on also. We tried Flowmaster and Dynomax (Magnaflow was an option but it wasn't a chambered exhaust so we didn't want to lose performance). Flowmaster sounded the loudest and sounded great in the low RPMs. But when we pushed it, it got reallllly raspy like a ricer. The Dynomax was quieter than the Flowmaster but this made it not so raspy. That is why I went with Dynomax. It sounds 100% better than stock. I'm very glad with my decision. p.s. Those stock mufflers are freakin huge. Sorry I forgot to take pics up at the bottom of the car when I was down in the pit. Stock New Tips

08-07-2009, 08:13 PM	#2
scrming Red Brick of Vengeance! Drives: 12 Second Brick Join Date: Jun 2009 Location: at my pulpit Posts: 7,745	very cool... and good info! Now lets see some viddys!!! LOL __________________ 2011 Ford Flex EcoBoost Limited - 12.727 @ 109.790 MPH

08-08-2009, 08:18 AM	#8
ckaram Drives: 2011 2SS RS, 1968 ragtop Join Date: Apr 2009 Location: Indiana Posts: 1,850	Post some vids! __________________ 1968 Camaro Convertible LS1, T56

08-10-2009, 03:13 PM	#9
calflan Drives: 1LT; IBM; 6 Spd Manual Join Date: May 2009 Location: Heath, Tx. Posts: 499	What model Dynomax did you use. Was it the Dynomax 24238 Ultra Flo Welded Muffler Resonator ? __________________ 1LT; Airaid CAI; Flowmaster American Thunder Axelback; Int Floor Lts; RS Spoiler; Radio Controls; Sequential tail lights; Oil Catch Can; VMAX Throttle Body; MACE plenum spacer; Mace manifold insulator[/I]

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dynomax Bullets installed on LS3	LS3SSRS	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	16	10-10-2010 11:35 AM
Dynomax bullets?	LS3SSRS	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	6	06-26-2009 04:20 AM
Dynomax Exhaust 2008 Dodge Challenger SRT-8 6.1L	KILLER74Z28	General Automotive + Other Cars Discussion	9	08-16-2008 01:04 PM

08-07-2009, 08:25 PM	#3
BigBOSS Drives: 2010 Camaro 1LT/RS, 6M, IBM Join Date: Jul 2009 Location: Austin, TX Posts: 480	Dynomax Resonators are like $40 aren't they?

08-07-2009, 08:30 PM	#4
bluecamaroguy Drives: 2010 2LT/RS ABM! Join Date: May 2009 Location: san diego Posts: 254 View My Garage	No idea but we didn't put them on. You could be right though. I'll try to get a video up this weekend or next at the latest. Also, I am pretty sure this improved my gas mileage.

08-07-2009, 08:33 PM	#5
BigBOSS Drives: 2010 Camaro 1LT/RS, 6M, IBM Join Date: Jul 2009 Location: Austin, TX Posts: 480	The new tips look amazing as well. 2.5 inch Inlet / 3.5 inch Outlet?