You are browsing camaro5 
 |
|
06-04-2019, 10:51 PM
|
#1 |
    
Drives: 2013 Camaro 1LE 1SS Join Date: Aug 2012
Location: Detroit
Posts: 1,252
|
2013 1LE SS bearings for sale
28,000 miles on car, I upgraded to z/28 bearings. No play or grind in them and these are stiffer than the SS bearings. Will not fit the SS half shafts I believe due to the spline number but need to check.
$45 a bearing shipped to lower 48 states or $150 for all 4.
__________________
I work for General Motors and am not an official spokes person for General Motors. My views and opinions are my own and not those of General Motors.
|
|
|
|
07-01-2019, 10:21 AM
|
#2 |
|
Drives: 2013 Camaro 1LE 1SS Join Date: Aug 2012
Location: Detroit
Posts: 1,252
|
Bump
__________________
I work for General Motors and am not an official spokes person for General Motors. My views and opinions are my own and not those of General Motors.
|
|
|
|
|
07-01-2019, 12:48 PM
|
#3 |
      
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,148
|
I have the standard SS bearings in mine with 1LE axles no issues just need a washer an correct locknut. An how much better is the Z bearing set up?
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
|
|
|
|
07-02-2019, 08:28 PM
|
#4 |
|
Drives: 2013 Camaro 1LE 1SS Join Date: Aug 2012
Location: Detroit
Posts: 1,252
|
The 1LE has stiffer bearings that the SS they are unique part numbers. However the z/28 is a step up from that. However not that you can tell from a drive on the street.
__________________
I work for General Motors and am not an official spokes person for General Motors. My views and opinions are my own and not those of General Motors.
|
|
|
|
|
07-21-2019, 03:27 PM
|
#5 |
|
Drives: 2013 Camaro 1LE 1SS Join Date: Aug 2012
Location: Detroit
Posts: 1,252
|
Bump
__________________
I work for General Motors and am not an official spokes person for General Motors. My views and opinions are my own and not those of General Motors.
|
|
|
|
|
07-26-2019, 01:56 PM
|
#6 |
 Drives: 2012 Chevy Camaro 2SS Join Date: May 2016
Location: Las Vegas
Posts: 415
|
Hi, I have a 2012 SS do will fit or need to buy something else for them to fit
Sent from my iPhone using Tapatalk |
|
|
|
|
09-02-2019, 01:08 AM
|
#7 |
|
Drives: 2013 Camaro 1LE 1SS Join Date: Aug 2012
Location: Detroit
Posts: 1,252
|
Bump. Yea they fit SS cars no other mods needed.
__________________
I work for General Motors and am not an official spokes person for General Motors. My views and opinions are my own and not those of General Motors.
|
|
|
|
|
01-26-2020, 11:29 PM
|
#8 |
|
Drives: 2013 Camaro 1LE 1SS Join Date: Aug 2012
Location: Detroit
Posts: 1,252
|
Still got these...0
__________________
I work for General Motors and am not an official spokes person for General Motors. My views and opinions are my own and not those of General Motors.
|
|
|
|
|
02-11-2020, 01:12 AM
|
#9 |
 Drives: G8 GXP Join Date: Nov 2019
Location: Michigan
Posts: 9
|
Great seller
This is a great deal for someone |
|
|
|
|
|
|
|
 |
|
|
