Which bolt for this dust cover? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

dma05 · 11-15-2021, 01:24 AM

I noticed that the dust cover for my starter is missing and the cover is just hanging there. Anyone know the part number or bolt size? I can’t find it for the life of me!

My car:
2011 2SS M6 (LS3)

Thanks

morepowerjoe · 11-15-2021, 07:09 AM

Take the one out of the other side and use that one to find your new one.

1JEWLDSSRS · 11-15-2021, 10:17 AM

Quote:

Originally Posted by morepowerjoe

Take the one out of the other side and use that one to find your new one.

This would be your easiest way to find it. Then you could go to your local hardware and get one. And would probably be cheaper too.

dma05 · 11-15-2021, 11:44 AM

Quote:

Originally Posted by morepowerjoe

Take the one out of the other side and use that one to find your new one.

DUH! Sometimes I’m so deep into a project that I don’t see the obvious solution. Thanks for the advice. Bolt already taken off the other side and now off to the hardware store.

Thanks!

1JEWLDSSRS · 11-15-2021, 11:57 AM

Quote:

Originally Posted by dma05

DUH! Sometimes I’m so deep into a project that I don’t see the obvious solution. Thanks for the advice. Bolt already taken off the other side and now off to the hardware store.

Thanks!

Yea, it happens, been there done that!!

Good luck..

Batmanntexas · 11-15-2021, 12:11 PM

For reference, it should be an M6x1.00, length is probably 15mm.

11-15-2021, 01:24 AM	#1
dma05 Drives: 2011 Camaro 2SS/RS Join Date: Jan 2011 Location: Azusa, CA Posts: 365	Which bolt for this dust cover? I noticed that the dust cover for my starter is missing and the cover is just hanging there. Anyone know the part number or bolt size? I can’t find it for the life of me! My car: 2011 2SS M6 (LS3) Thanks Attached Images __________________ Allen 2011 Camaro 2SS/RS

11-15-2021, 07:09 AM	#2
morepowerjoe Drives: 2012 Chevrolet Camaro l99 Join Date: Aug 2020 Location: Austin, TX Posts: 2,232	Take the one out of the other side and use that one to find your new one. __________________ DSS Pistons, Eagle ESP L19 Rods, ARP Head and Main Studs, TSP PRC CNC Ported Heads milled .030, Cometic .040 Head Gaskets, GPI SS3 VVT Camshaft, GM Racing Lifters, CHE Trunnions, Melling 10355HV Oil Pump, Cold Air Inductions CAI, Fast LSXR Intake Manifold, Nick Williams 103 TB, TSP Longtubes, ZL1 Fuel Pump, Mishimoto Radiator and Oil Cooler, 3600 Circle D Converter, Tru Cool 40k Tranny Cooler, Fluid Dynamics Balancer, EBC 3GD Rotors with EBC Bluestuff NDX Pads, Bilstein B6 Shocks / Struts with Eibach ZL1 Drop Springs Build Thread https://www.camaro5.com/forums/showthread.php?t=609817

11-15-2021, 12:11 PM	#6
Batmanntexas Drives: 2012 Camaro SS (2SS) Join Date: Aug 2012 Location: Stafford, VA Posts: 1,394 View My Garage	For reference, it should be an M6x1.00, length is probably 15mm. __________________ 745RWHP/634RWTQ on 93 @ 10psi 806/676 on E85 @ 10psi Currently @15-16psi.... COTW 9/8/14