Flashing Airbag Light with no codes - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Casey Willett · 05-07-2025, 11:30 AM

I have searched the forums with no luck to my exact issue. I have a 2010 Camaro SS 6.2

I've owned the car for a few months and the airbag light was staying on. I read the codes and it was the passenger seat location sensor. After further research I found out that the seats in my car were not the stock seats and did not have the location sensor. The previous owner had installed a "Airbag 360" module to attempt to turn the light off. This module from my understanding only works for the passenger occupancy weight sensor not the location sensor on the rail.

I found a donor car that had roof damage from a tree falling on it. No airbags were deployed. I removed the SS leather seats and installed them in my car. All seats had the correct sensors and wiring harness.

The SRS system now does not have any codes when scanning it.

The airbag light now just flashes on and off while driving the car. I have put a good many miles on the car trying to see if it will clear with no luck.

I've talked to a company about resetting the airbag module which only needs to be preformed when there is a airbag deployed and that exactly what they said. If there isn't any codes showing then nothing to reset.

Before I send to dealership or send the module off to have them try to reset or clear the module has anyone ran across this issue?

Any help appreciated.

05-07-2025, 11:30 AM	#1
Casey Willett Drives: 2010 Chevrolet Camaro SS Join Date: May 2025 Location: Gadsden, ALabama Posts: 1	Flashing Airbag Light with no codes I have searched the forums with no luck to my exact issue. I have a 2010 Camaro SS 6.2 I've owned the car for a few months and the airbag light was staying on. I read the codes and it was the passenger seat location sensor. After further research I found out that the seats in my car were not the stock seats and did not have the location sensor. The previous owner had installed a "Airbag 360" module to attempt to turn the light off. This module from my understanding only works for the passenger occupancy weight sensor not the location sensor on the rail. I found a donor car that had roof damage from a tree falling on it. No airbags were deployed. I removed the SS leather seats and installed them in my car. All seats had the correct sensors and wiring harness. The SRS system now does not have any codes when scanning it. The airbag light now just flashes on and off while driving the car. I have put a good many miles on the car trying to see if it will clear with no luck. I've talked to a company about resetting the airbag module which only needs to be preformed when there is a airbag deployed and that exactly what they said. If there isn't any codes showing then nothing to reset. Before I send to dealership or send the module off to have them try to reset or clear the module has anyone ran across this issue? Any help appreciated.