SLICKS AND SKINNYS OPTIONS? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

playadam · 05-10-2010, 06:53 PM

Our shop car has all the power it needs to brake deep into the 11's and we are slipping and sliding all over the track with the heavy, narrow and hard stock tires. I have had good luck with ccws in the past but what are the fastest 2010 camaros running? Where did you get your wheels? Looking to buy asap new or used.

Ernie@P · 05-10-2010, 06:58 PM

I would do some of these

Champion Wheels
you can get them super wide also :-))

Supercharged SS · 05-10-2010, 07:08 PM

I was able to crack off a 10.99 @ 125 with my set of 18" drag radials. Which are now up for sale in the classified section. I have since ordered a set of custom 17" Bogarts with Hoosier slicks. They should be here Friday.

playadam · 05-10-2010, 07:13 PM

how long did the bogarts take to make? How much is a set? i wonder how good fitment is. I have the h & r springs on the car so it is dropped about 1.5 in. What are your mods? I am heads, cam, stall, full exhaust n tune.

Ernie@P · 05-10-2010, 07:48 PM

Quote:

Originally Posted by playadam

how long did the bogarts take to make? How much is a set? i wonder how good fitment is. I have the h & r springs on the car so it is dropped about 1.5 in. What are your mods? I am heads, cam, stall, full exhaust n tune.

I am a WD dealer with Bogart (makes it nice since they are right up the street)i would not recommend driving Bogarts on the street. the Alloy that they are made from is too soft for the street and they bend, Bogar will even tell you that

Ernie

speedster · 05-10-2010, 07:51 PM

Quote:

Originally Posted by playadam

Our shop car has all the power it needs to brake deep into the 11's and we are slipping and sliding all over the track with the heavy, narrow and hard stock tires. I have had good luck with ccws in the past but what are the fastest 2010 camaros running? Where did you get your wheels? Looking to buy asap new or used.

Get a hold of Steve at SJM (he is a member here on Camaro 5) and have him hook you up with a set of 17" Bogarts for the rear.

The SST Camaro uses a set of 18" Forgelines with 345 MT DR's but will also utilize a set of 17" Bogarts with slicks for certain tracks.

WongBob · 05-10-2010, 07:55 PM

CCW has a drag package for our cars. ccwheel.com

Supercharged SS · 05-10-2010, 08:19 PM

I got my Bogarts from Steve at SJM. They normally take a month but he had them built in two weeks. And a week to ship. If I had known they were comming from AZ I would have two dayed them. Steve is awesome to deal with. The fitment is supposed to be outstanding. The final price with shipping for the two rears was $1500 and the $200 each for my slicks. As opposed to the 18"s which were $600 for both and the $300 each for the M & H dr's. I don't not intend to drive the Bogarts on the road. They are track only as I trailer the car.

2010 SSRS · 05-10-2010, 08:22 PM

those are nice wheels

playadam · 05-17-2010, 08:17 PM

i went with ccw 16 inch rear with 17 in front runners and m&h tires. They are gonna be shipped anodized black. He said I need to run v6 rear brakes and rotors..has anyone posted how to pics of this or the correct part numbers for locating the parts needed to do this?

Supercharged SS · 05-17-2010, 08:48 PM

There are a few guys who are looking to sell the V6 brakes. I posted something in the classifieds a while back and there were a few guys who chimed in. I ended up opted for the 17"s. There are a few guys who have gone to the 16" rear. Bigdog on here is one of them. Gd luck

playadam · 05-18-2010, 05:02 PM

what all do you need to fit them? I am assuming rear brake calipers, brake pads and rotors? any brackets?

Dentyneice · 05-20-2010, 09:01 PM

What size bogart 17"s would you need to fit 345 DR's or slicks and would you need to mod the car in any way to fit them?

Supercharged SS · 05-20-2010, 09:03 PM

I didn't get to choose a width when I got my wheels.If they are to wide I know they'll hit the brakes line. As it is right now, I think they are 10.5" wide and that puts them about 2.5" from the mounted brake line.

05-10-2010, 06:53 PM	#1
playadam Drives: anything lsx Join Date: Nov 2009 Location: waco Posts: 40	SLICKS AND SKINNYS OPTIONS? Our shop car has all the power it needs to brake deep into the 11's and we are slipping and sliding all over the track with the heavy, narrow and hard stock tires. I have had good luck with ccws in the past but what are the fastest 2010 camaros running? Where did you get your wheels? Looking to buy asap new or used. __________________

05-10-2010, 07:13 PM	#4
playadam Drives: anything lsx Join Date: Nov 2009 Location: waco Posts: 40	how long did the bogarts take to make? How much is a set? i wonder how good fitment is. I have the h & r springs on the car so it is dropped about 1.5 in. What are your mods? I am heads, cam, stall, full exhaust n tune. __________________

05-10-2010, 08:22 PM	#9
2010 SSRS Drives: 3 V8 Camaros Join Date: May 2009 Location: The Ocean State Posts: 111,186 View My Garage	those are nice wheels __________________ Jannetty Racing JRE Street Package

05-17-2010, 08:17 PM	#10
playadam Drives: anything lsx Join Date: Nov 2009 Location: waco Posts: 40	i went with ccw 16 inch rear with 17 in front runners and m&h tires. They are gonna be shipped anodized black. He said I need to run v6 rear brakes and rotors..has anyone posted how to pics of this or the correct part numbers for locating the parts needed to do this? __________________

05-18-2010, 05:02 PM	#12
playadam Drives: anything lsx Join Date: Nov 2009 Location: waco Posts: 40	what all do you need to fit them? I am assuming rear brake calipers, brake pads and rotors? any brackets? __________________

05-10-2010, 06:58 PM	#2
Ernie@P Drives: 1998 Formula Join Date: May 2010 Location: Phoenix Posts: 89	I would do some of these Champion Wheels you can get them super wide also :-))

05-10-2010, 07:08 PM	#3
Supercharged SS Account Suspended Drives: 2010 Camaro Join Date: Feb 2010 Location: Sandy Hook, CT Posts: 11,926	I was able to crack off a 10.99 @ 125 with my set of 18" drag radials. Which are now up for sale in the classified section. I have since ordered a set of custom 17" Bogarts with Hoosier slicks. They should be here Friday.

05-10-2010, 07:55 PM	#7
WongBob Dig Race? Drives: '13 AGM 2SS/RS 1LE Join Date: Dec 2009 Location: Minden, LA Posts: 316	CCW has a drag package for our cars. ccwheel.com

05-10-2010, 08:19 PM	#8
Supercharged SS Account Suspended Drives: 2010 Camaro Join Date: Feb 2010 Location: Sandy Hook, CT Posts: 11,926	I got my Bogarts from Steve at SJM. They normally take a month but he had them built in two weeks. And a week to ship. If I had known they were comming from AZ I would have two dayed them. Steve is awesome to deal with. The fitment is supposed to be outstanding. The final price with shipping for the two rears was $1500 and the $200 each for my slicks. As opposed to the 18"s which were $600 for both and the $300 each for the M & H dr's. I don't not intend to drive the Bogarts on the road. They are track only as I trailer the car.

05-17-2010, 08:48 PM	#11
Supercharged SS Account Suspended Drives: 2010 Camaro Join Date: Feb 2010 Location: Sandy Hook, CT Posts: 11,926	There are a few guys who are looking to sell the V6 brakes. I posted something in the classifieds a while back and there were a few guys who chimed in. I ended up opted for the 17"s. There are a few guys who have gone to the 16" rear. Bigdog on here is one of them. Gd luck

05-20-2010, 09:01 PM	#13
Dentyneice Drives: 2010 Camaro 2ss Join Date: Apr 2009 Location: new Jersey Posts: 254	What size bogart 17"s would you need to fit 345 DR's or slicks and would you need to mod the car in any way to fit them? __________________ 2010 CGM/Black 2SS M6 20% Tint -:- Hurst 44% Short Throw Shifter -:- Viper 5901 Alarm/Remote start -:- High Gloss Black Painted Calipers + White Brembo Decal

05-20-2010, 09:03 PM	#14
Supercharged SS Account Suspended Drives: 2010 Camaro Join Date: Feb 2010 Location: Sandy Hook, CT Posts: 11,926	I didn't get to choose a width when I got my wheels.If they are to wide I know they'll hit the brakes line. As it is right now, I think they are 10.5" wide and that puts them about 2.5" from the mounted brake line.