V6 with Borla Pro-X series mufflers!!! - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

CamaroBAMF28 · 08-23-2009, 06:45 PM

Quote:

Originally Posted by derin11

This is my newest project, Cut out the straight pipes, added 2 Borla Pro-X series Street Mufflers, Stock cats and resonators

what part number is that???

SamSS · 01-03-2010, 05:14 AM

I'm sorry, but this is definitely not my 'cup of tea'.
Sounds more like an import car.

Like what you've done with the wheels though.

j.roskowske · 01-08-2010, 02:01 AM

I too would like to know what it is that you've done and what you used. I'm going to be looking to put an exhaust on mine and my mechanic was impressed with your video when I showed him and asked what it is you are using as he helps research for me.

Cyber Gray · 01-11-2010, 04:32 AM

Hi Guys,

I wrote to Borla about their new Cat backs for V6 Camaro. They told me you should expect 12-15 hp increase/ 8-10 ft lbs of torque.

But no data is still on GMPP hp gains, which is really weird !!

digitalshow · 05-29-2010, 10:10 PM

Hi - I had an axel-back addition of Borla Pro XS mufflers added to my V6 Camaro too. I posted some sample clips for you to see/hear. When it's sitting in the garage...the rattle you hear at the end of the last two gas presses...is the 2nd garage door vibrating.

Xploite · 05-29-2010, 10:28 PM

Quote:

Originally Posted by digitalshow

Hi - I had an axel-back addition of Borla Pro XS mufflers added to my V6 Camaro too. I posted some sample clips for you to see/hear. When it's sitting in the garage...the rattle you hear at the end of the last two gas presses...is the 2nd garage door vibrating.

Sounds sweet. Something else for me to consider.

nachocheese · 05-29-2010, 11:03 PM

That video is awesome

digitalshow · 05-29-2010, 11:22 PM

Hehe - yea nothing like living on a quiet county road. Here are a couple pics from below showing the install. (I also added larger chrome tips).

nachocheese · 05-31-2010, 07:35 PM

Have you seen any dyno numbers? I see alot about MRT and Flowmasters, but almost nothing about Borla. I also wonder what their catback sounds like.

FirstCamaro2k10 · 05-31-2010, 09:57 PM

i had a Borla Pro XS on my 05 Ram with a Hemi, loved it, best sounding exhaust id heard on a Ram.

nachocheese · 05-31-2010, 10:03 PM

I'll bet, but I think that is apples and oranges. It isn't hard to make a hemi sound good.

FirstCamaro2k10 · 06-01-2010, 02:51 PM

yeah, you couldnt be more right about that, the ol' Hemi sure sounded sweeet, that's why i was really worried and didnt plan to anything to my v6 Camaro, didnt want it sounding like a Boat/chainsaw/weedeater..ya know..But after listening to many clips on th Flowmaster kit, i desided to give it a try, and couldnt be happier. To me, its the most v8ish sounding exhaust. Very pleased with it.

dozer · 07-29-2010, 10:47 PM

has anyone put an ss exhaust on a 2LT. if so, what oes it sound like.

thanks,
Dozer

muscle · 09-16-2010, 12:52 AM

Quote:

Originally Posted by Cyber Gray

Hi Guys,

I wrote to Borla about their new Cat backs for V6 Camaro. They told me you should expect 12-15 hp increase/ 8-10 ft lbs of torque.

But no data is still on GMPP hp gains, which is really weird !!

That's not too bad.

01-03-2010, 05:14 AM	#30
SamSS Drives: '10 Camaro SS Join Date: Oct 2009 Location: CA Posts: 773	I'm sorry, but this is definitely not my 'cup of tea'. Sounds more like an import car. Like what you've done with the wheels though. __________________ 2010 Camaro SS A6, Rotofab intake, Flowmaster American Thunder exhaust, JBA off-road pipes, PFADT sway bars and lowering springs, Dyno tuned by CMS

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
V8 Camaro Performance Upgrades List	Milk 1027	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	93	08-30-2021 06:56 PM
Stereo GUIDE ALL READ	WildBeast15	Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum	29	09-11-2010 02:14 AM
check this out -- Camaro Funny Car (NMCA Pro Street & NOPI series drag car)	1bad67camaro	Camaro Photos \| Spyshots \| Video \| Media Gallery	48	06-19-2009 11:51 AM

01-08-2010, 02:01 AM	#31
j.roskowske Drives: 2010 Chevrolet Camaro 2LT Join Date: Jan 2010 Location: Cedar Hill, MO Posts: 20	I too would like to know what it is that you've done and what you used. I'm going to be looking to put an exhaust on mine and my mechanic was impressed with your video when I showed him and asked what it is you are using as he helps research for me.

01-11-2010, 04:32 AM	#32
Cyber Gray Wind Rider Drives: ZL1 19 White; Jeep 5.7 GC 15 Join Date: Jan 2010 Location: Muscat Posts: 2,059 View My Garage	Hi Guys, I wrote to Borla about their new Cat backs for V6 Camaro. They told me you should expect 12-15 hp increase/ 8-10 ft lbs of torque. But no data is still on GMPP hp gains, which is really weird !!

05-29-2010, 11:03 PM	#35
nachocheese Drives: 1LT RS, SIM Join Date: Aug 2009 Location: Columbia, SC Posts: 288	That video is awesome

05-29-2010, 11:22 PM	#36
digitalshow Drives: 2010 Camaro RS Join Date: Sep 2008 Location: Meridian, MS Posts: 39	Hehe - yea nothing like living on a quiet county road. Here are a couple pics from below showing the install. (I also added larger chrome tips).

05-31-2010, 07:35 PM	#37
nachocheese Drives: 1LT RS, SIM Join Date: Aug 2009 Location: Columbia, SC Posts: 288	Have you seen any dyno numbers? I see alot about MRT and Flowmasters, but almost nothing about Borla. I also wonder what their catback sounds like.

05-31-2010, 09:57 PM	#38
FirstCamaro2k10 Drives: 2010 Silver Ice Metallic Camaro LS Join Date: Feb 2010 Location: Just North of Beaumont, TX Posts: 731 View My Garage	i had a Borla Pro XS on my 05 Ram with a Hemi, loved it, best sounding exhaust id heard on a Ram.

05-31-2010, 10:03 PM	#39
nachocheese Drives: 1LT RS, SIM Join Date: Aug 2009 Location: Columbia, SC Posts: 288	I'll bet, but I think that is apples and oranges. It isn't hard to make a hemi sound good.

06-01-2010, 02:51 PM	#40
FirstCamaro2k10 Drives: 2010 Silver Ice Metallic Camaro LS Join Date: Feb 2010 Location: Just North of Beaumont, TX Posts: 731 View My Garage	yeah, you couldnt be more right about that, the ol' Hemi sure sounded sweeet, that's why i was really worried and didnt plan to anything to my v6 Camaro, didnt want it sounding like a Boat/chainsaw/weedeater..ya know..But after listening to many clips on th Flowmaster kit, i desided to give it a try, and couldnt be happier. To me, its the most v8ish sounding exhaust. Very pleased with it.

07-29-2010, 10:47 PM	#41
dozer Drives: 2010 camaro 2lt/rs Join Date: Sep 2009 Location: jax florida Posts: 9	has anyone put an ss exhaust on a 2LT. if so, what oes it sound like. thanks, Dozer