2014 Heat extractor on a 2010 hood - Page 25 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Chaxce · 11-03-2014, 02:53 PM

It will but the cowl lines will not line up

xc_SS/RS · 11-03-2014, 02:54 PM

Quote:

Originally Posted by Jerry7297

Page 2 1/2 way down are some pics of the vent with stripes. If you tape up your hood real good you should be fine and would not mess up your stripes. If they are aftermarket stripes you may want to cut them 1st lightly with a razor knife before cutting so you dont pull them up with a saw blade. Just a suggestion, If they are factory stripes I would just cut right through them.

http://www.camaro5.com/forums/showth...=346744&page=2

Ah very good. Yes they're factory stripes but when I get around to doing this I will be sure to tape up really good.

Now time to order the part and summon enough guts to do it lol

TECHTURTLE · 11-12-2014, 08:18 PM

I searched but couldn't find the answer... Anyone install this with an OEM strut bar installed??

chozn4service · 11-12-2014, 08:42 PM

I have it with the OEM strut bar and no issue. The 2014 hood will work however the lines on the 2014 hood do not line up with 2010-2013 bumper cover. You could do it but there will be gaps where those lines meet. We took a car from a dealership and did a good swap and it worked as far as install but didn't match up. Just enough for the OCD in this SOB to kick in and say hell to the naw!

Sent from my iPhone using Tapatalk

hammdo · 11-12-2014, 10:34 PM

I did the hex vents with the Strut bar -- no issue -- as long as you tell them you have the bar (and you want the 'drip' pans)

-Don

NotYetLegend · 11-13-2014, 12:59 PM

Quote:

Originally Posted by TECHTURTLE

I searched but couldn't find the answer... Anyone install this with an OEM strut bar installed??

Yes this works fine. I have the OEM strut bat and had no issues. Its interesting to see but once you cut the hole in the hood it surprises you just how low the engine and even strut bar are under there. Tons of supercharger room I suppose.

TECHTURTLE · 11-13-2014, 01:04 PM

Sweet thanks... Ordered mine last night.

crc91 · 11-14-2014, 02:07 AM

Glad everyone is enjoying their vent! I can't wait to do mine! I'm gunna have lethal racing do an apr splitter and z/28 spoiler with wickerbill and a mgw shift kit while it's in there! Should look and shift like a totally different car when I'm done! For those that have done the vent AND water tray is the tray easily removable? And can you actually see the vent working at stop lights?

hammdo · 11-14-2014, 05:47 AM

For mine (hex vents) -- yes, the vents work to remove heat -- my drip pans are bolted on so you can remove them easily -- the 'one piece' not sure

-Don

justjoshin · 11-23-2014, 08:52 PM

Really thinking about doing this but nervous about cutting out so much of the bracing. Have any of you experienced excessive flex in the hood after?

justjoshin · 11-24-2014, 09:23 AM

Quote:

Originally Posted by Avalnch

Does anyone know if the entire 2014 hood assembly with the extractor will bolt right up to a 2010 SS/RS?

Member BLACK10 has one on his car and it looks good. Hood and bumper lines don't match up but it still looks good.

crc91 · 11-24-2014, 10:38 AM

Hopefully I'll be able to get this done soon!

JantzenOKC · 11-24-2014, 10:15 PM

I'm still working up the nerve to do this...

Eddiefuzz · 11-25-2014, 03:20 AM

Quote:

Originally Posted by crc91

Glad everyone is enjoying their vent! I can't wait to do mine! I'm gunna have lethal racing do an apr splitter and z/28 spoiler with wickerbill and a mgw shift kit while it's in there! Should look and shift like a totally different car when I'm done! For those that have done the vent AND water tray is the tray easily removable? And can you actually see the vent working at stop lights?

Read the Thread! Mine is easily removable with 4 wing nuts. YES, I can waves of heat coming through when I'm at a light. If the temps are below 60, I can drive for hours and when I check, the intake manifold is still cool.

11-03-2014, 02:53 PM	#337
Chaxce Under construction... Drives: Black 2012 2SS Join Date: Jul 2014 Location: Uvalde Tx Posts: 246	It will but the cowl lines will not line up __________________ 2012 2SS/RS, mods coming soon

11-12-2014, 08:18 PM	#339
TECHTURTLE Drives: 2016 Camaro 2SS Join Date: Dec 2013 Location: OTP Atlanta Posts: 862 View My Garage	I searched but couldn't find the answer... Anyone install this with an OEM strut bar installed?? __________________ 2016 2SS 6-Speed Manual... Magnetic Ride Control, Dual Mode Exhaust, Sunroof, Adrenaline Red Interior, Mylink W/Navigation Added Edelbrock E-Force Supercharger, GM 1LE Sway Bars, BMR Upper/Lower Trailing Arms, BMR Upper Control Arms. BMR Front/Rear Chassis Braces, BMR Tunnel Brace. GM Red knee Pads, GM Black Front Splitter, GM SEMA Concept Grille, GM Dark Taillights, GM Ground Effects package... Savini Di Forza BM-14 Gloss Black Wheels 9's front, 10's rear.

11-12-2014, 08:42 PM	#340
chozn4service Drives: 2016 SS w/2SS A8 Blue Velvet Join Date: Dec 2009 Location: 39.793153,-86.238223 Posts: 3,678 View My Garage	I have it with the OEM strut bar and no issue. The 2014 hood will work however the lines on the 2014 hood do not line up with 2010-2013 bumper cover. You could do it but there will be gaps where those lines meet. We took a car from a dealership and did a good swap and it worked as far as install but didn't match up. Just enough for the OCD in this SOB to kick in and say hell to the naw! Sent from my iPhone using Tapatalk __________________ Never grow up, it's a trap!

11-13-2014, 01:04 PM	#343
TECHTURTLE Drives: 2016 Camaro 2SS Join Date: Dec 2013 Location: OTP Atlanta Posts: 862 View My Garage	Sweet thanks... Ordered mine last night. __________________ 2016 2SS 6-Speed Manual... Magnetic Ride Control, Dual Mode Exhaust, Sunroof, Adrenaline Red Interior, Mylink W/Navigation Added Edelbrock E-Force Supercharger, GM 1LE Sway Bars, BMR Upper/Lower Trailing Arms, BMR Upper Control Arms. BMR Front/Rear Chassis Braces, BMR Tunnel Brace. GM Red knee Pads, GM Black Front Splitter, GM SEMA Concept Grille, GM Dark Taillights, GM Ground Effects package... Savini Di Forza BM-14 Gloss Black Wheels 9's front, 10's rear.

11-23-2014, 08:52 PM	#346
justjoshin Drives: 2010 SW 1SS L99 Camaro Join Date: Aug 2011 Location: Louisiana Posts: 2,085 View My Garage	Really thinking about doing this but nervous about cutting out so much of the bracing. Have any of you experienced excessive flex in the hood after? __________________

11-12-2014, 10:34 PM	#341
hammdo 'It's an experiment' Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014 Location: Dallas TX Posts: 8,709 View My Garage	I did the hex vents with the Strut bar -- no issue -- as long as you tell them you have the bar (and you want the 'drip' pans) -Don

11-14-2014, 02:07 AM	#344
crc91 Drives: '14 1LS Join Date: Apr 2014 Location: Mandeville Posts: 2,166	Glad everyone is enjoying their vent! I can't wait to do mine! I'm gunna have lethal racing do an apr splitter and z/28 spoiler with wickerbill and a mgw shift kit while it's in there! Should look and shift like a totally different car when I'm done! For those that have done the vent AND water tray is the tray easily removable? And can you actually see the vent working at stop lights?

11-14-2014, 05:47 AM	#345
hammdo 'It's an experiment' Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014 Location: Dallas TX Posts: 8,709 View My Garage	For mine (hex vents) -- yes, the vents work to remove heat -- my drip pans are bolted on so you can remove them easily -- the 'one piece' not sure -Don

11-24-2014, 10:38 AM	#348
crc91 Drives: '14 1LS Join Date: Apr 2014 Location: Mandeville Posts: 2,166	Hopefully I'll be able to get this done soon! __________________ Patiently waiting for my 2023 SS 1LE

11-24-2014, 10:15 PM	#349
JantzenOKC Drives: '13 2LT/RS Twin Turbo Join Date: Aug 2012 Location: Edmond, Oklahoma Posts: 3,073	I'm still working up the nerve to do this...