2014 Heat extractor on a 2010 hood - Page 47 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

chozn4service · 11-26-2015, 05:16 PM

Not sure the can even be seen or not but I drove to the gas station to top it off for the winters nap, about 4mi's each way and saw the waves coming out so I shot this.

Sent from my iPhone using Tapatalk

Pro Stock John · 11-27-2015, 11:22 AM

I don't see the heat but I believe you guys. I will buy the parts soon and post some pics.

chozn4service · 11-27-2015, 11:32 AM

Yea John, it's hard to see. If you concentrate on the curb across from my drive, where the street lawn meets the section of side walk you can see the ripples or waves. Look how there is a moving distortion. It also helps to turn your phone sideways to get a bigger view.
I had the Hex Vents on the last car and got same affect but I do like the OEM look and by design you can see how heat will flow out especially with air flow from up front and still not allow for the motor to get wet. I personally think it's a win win modification.

Sent from my iPhone using Tapatalk

Pro Stock John · 11-27-2015, 11:51 AM

Okay now I can see something happening.

chozn4service · 11-27-2015, 11:56 AM

Like I said, I ran to get that super cheap gas while prices are low and we're talking total eight mile run so not super hot but still, heat waves were coming out. I recall driving to tour the Heritage Museum with the club, Indy NexGen and in Michigan it was cool but on the road from Indy to Novi, when stopped it was pouring out. Really something to see and anytime heat is being removed from the engine bay, it's a good thing whether moving or sitting still!

Sent from my iPhone using Tapatalk

Ryanbabz71 · 11-27-2015, 12:32 PM

I can see it. It will save me from having to open my hood every time I get home

Come one Black Friday/ cyber Monday sales

Ryan

Ryanbabz71 · 12-05-2015, 09:08 AM

Made the plunge

Now time to cut a hole

Ryan

Pro Stock John · 12-05-2015, 11:46 AM

I ordered the parts yesterday, thanks guys. That video and other folks' comments helped me make the plunge too.

chozn4service · 12-05-2015, 12:01 PM

Can't wait to see your end results Ryan.

Sent from my iPhone using Tapatalk

Ryanbabz71 · 12-05-2015, 12:35 PM

Quote:

Originally Posted by chozn4service

Can't wait to see your end results Ryan.

Sent from my iPhone using Tapatalk

It probably wont happen until Jan-march sometime

BLU DUCE · 12-05-2015, 02:12 PM

I didn't put the 2014 in instead did the ACS TL1. And it cools great. Ran the car hard put heat gun on motor right away. It showed 130 degrees lower before installed.

pabloss · 12-12-2015, 03:21 AM

hi everybody.i just ordered my heat extractor ..wish me luck...im sure its gonna look badass
can anyone please just resume the type of screws I wiil need and everything besides the heat extractor and the water defector please?

pabloss · 12-12-2015, 04:04 AM

did anybody install it without painting the heat extractor or will it look good just the way it comes???

chozn4service · 12-12-2015, 04:52 AM

This is mine, as it came from GM in OEM satin black. Thought about paint but decided to leave as is. After moving the festival cars which were white last year at IMS, the grill on those came white which was okay but had it been me I would have covered the mesh and left it black allowing the main portion to be body colored. Yes it's time consuming and probably why it wasn't don't that way but the small things are what counts. Attention to detail.

Sent from my iPhone using Tapatalk

11-26-2015, 05:16 PM	#645
chozn4service Drives: 2016 SS w/2SS A8 Blue Velvet Join Date: Dec 2009 Location: 39.793153,-86.238223 Posts: 3,678 View My Garage	Not sure the can even be seen or not but I drove to the gas station to top it off for the winters nap, about 4mi's each way and saw the waves coming out so I shot this. Sent from my iPhone using Tapatalk __________________ Never grow up, it's a trap!

11-27-2015, 11:22 AM	#646
Pro Stock John Writer Drives: 2010 SS / 1967 Camaro Join Date: May 2009 Location: Chicago, IL Posts: 7,221	I don't see the heat but I believe you guys. I will buy the parts soon and post some pics. __________________ PROJECT HEAVY CHEVY Camaro Now: Mods for the Masses Part I \| Part II 13.15@106 1.95 \| 100% Stock 12.37@112 1.85 \| + Kooks Headers/Cats + 20" 555R + CAI + BW TB + UDP + Tune 12.06@113 1.70 \| + CD 3200 + 18" NT05R + RCR Intake + NE OTR + GPI Tune 11.84@115 1.59 \| + 3.91s + Race Star 17x7 Fronts 10.90@125 1.47 \| + GPI VVT Cam + BW Ported Heads + CD 3800

11-27-2015, 11:32 AM	#647
chozn4service Drives: 2016 SS w/2SS A8 Blue Velvet Join Date: Dec 2009 Location: 39.793153,-86.238223 Posts: 3,678 View My Garage	Yea John, it's hard to see. If you concentrate on the curb across from my drive, where the street lawn meets the section of side walk you can see the ripples or waves. Look how there is a moving distortion. It also helps to turn your phone sideways to get a bigger view. I had the Hex Vents on the last car and got same affect but I do like the OEM look and by design you can see how heat will flow out especially with air flow from up front and still not allow for the motor to get wet. I personally think it's a win win modification. Sent from my iPhone using Tapatalk __________________ Never grow up, it's a trap!

11-27-2015, 11:51 AM	#648
Pro Stock John Writer Drives: 2010 SS / 1967 Camaro Join Date: May 2009 Location: Chicago, IL Posts: 7,221	Okay now I can see something happening. __________________ PROJECT HEAVY CHEVY Camaro Now: Mods for the Masses Part I \| Part II 13.15@106 1.95 \| 100% Stock 12.37@112 1.85 \| + Kooks Headers/Cats + 20" 555R + CAI + BW TB + UDP + Tune 12.06@113 1.70 \| + CD 3200 + 18" NT05R + RCR Intake + NE OTR + GPI Tune 11.84@115 1.59 \| + 3.91s + Race Star 17x7 Fronts 10.90@125 1.47 \| + GPI VVT Cam + BW Ported Heads + CD 3800

11-27-2015, 11:56 AM	#649
chozn4service Drives: 2016 SS w/2SS A8 Blue Velvet Join Date: Dec 2009 Location: 39.793153,-86.238223 Posts: 3,678 View My Garage	Like I said, I ran to get that super cheap gas while prices are low and we're talking total eight mile run so not super hot but still, heat waves were coming out. I recall driving to tour the Heritage Museum with the club, Indy NexGen and in Michigan it was cool but on the road from Indy to Novi, when stopped it was pouring out. Really something to see and anytime heat is being removed from the engine bay, it's a good thing whether moving or sitting still! Sent from my iPhone using Tapatalk __________________ Never grow up, it's a trap!

11-27-2015, 12:32 PM	#650
Ryanbabz71 Drives: 2021 ZL1 1LE Satin Steel Join Date: Jul 2011 Location: Brownsburg, Indiana Posts: 6,359 View My Garage	I can see it. It will save me from having to open my hood every time I get home Come one Black Friday/ cyber Monday sales Ryan __________________ Ryan 2021 ZL1 1LE Satin Steel Metallic Build Page: https://www.camaro6.com/forums/showthread.php?t=632481

12-05-2015, 09:08 AM	#651
Ryanbabz71 Drives: 2021 ZL1 1LE Satin Steel Join Date: Jul 2011 Location: Brownsburg, Indiana Posts: 6,359 View My Garage	Made the plunge Now time to cut a hole Ryan __________________ Ryan 2021 ZL1 1LE Satin Steel Metallic Build Page: https://www.camaro6.com/forums/showthread.php?t=632481

12-05-2015, 11:46 AM	#652
Pro Stock John Writer Drives: 2010 SS / 1967 Camaro Join Date: May 2009 Location: Chicago, IL Posts: 7,221	I ordered the parts yesterday, thanks guys. That video and other folks' comments helped me make the plunge too. __________________ PROJECT HEAVY CHEVY Camaro Now: Mods for the Masses Part I \| Part II 13.15@106 1.95 \| 100% Stock 12.37@112 1.85 \| + Kooks Headers/Cats + 20" 555R + CAI + BW TB + UDP + Tune 12.06@113 1.70 \| + CD 3200 + 18" NT05R + RCR Intake + NE OTR + GPI Tune 11.84@115 1.59 \| + 3.91s + Race Star 17x7 Fronts 10.90@125 1.47 \| + GPI VVT Cam + BW Ported Heads + CD 3800

12-05-2015, 12:01 PM	#653
chozn4service Drives: 2016 SS w/2SS A8 Blue Velvet Join Date: Dec 2009 Location: 39.793153,-86.238223 Posts: 3,678 View My Garage	Can't wait to see your end results Ryan. Sent from my iPhone using Tapatalk __________________ Never grow up, it's a trap!

12-05-2015, 02:12 PM	#655
BLU DUCE Drives: 2011 1SS/RS IBM Camaro Join Date: Jan 2011 Location: Chittenango, NY, USA Posts: 7,219 View My Garage	I didn't put the 2014 in instead did the ACS TL1. And it cools great. Ran the car hard put heat gun on motor right away. It showed 130 degrees lower before installed. __________________

12-12-2015, 03:21 AM	#656
pabloss Drives: 2010 camaro ss Join Date: Sep 2015 Location: santa maria ca Posts: 141	hi everybody.i just ordered my heat extractor ..wish me luck...im sure its gonna look badass can anyone please just resume the type of screws I wiil need and everything besides the heat extractor and the water defector please?

12-12-2015, 04:04 AM	#657
pabloss Drives: 2010 camaro ss Join Date: Sep 2015 Location: santa maria ca Posts: 141	did anybody install it without painting the heat extractor or will it look good just the way it comes???

12-12-2015, 04:52 AM	#658
chozn4service Drives: 2016 SS w/2SS A8 Blue Velvet Join Date: Dec 2009 Location: 39.793153,-86.238223 Posts: 3,678 View My Garage	This is mine, as it came from GM in OEM satin black. Thought about paint but decided to leave as is. After moving the festival cars which were white last year at IMS, the grill on those came white which was okay but had it been me I would have covered the mesh and left it black allowing the main portion to be body colored. Yes it's time consuming and probably why it wasn't don't that way but the small things are what counts. Attention to detail. Sent from my iPhone using Tapatalk __________________ Never grow up, it's a trap!