02-01-2018, 02:15 PM | #1 |
|
Welds anyone run 17 inch on back 18 inch on Front?Pics
Pics? Don't want to run a Skinny.Run 1/2 mile. Was planning on the S71's up front. Have a set of 17x10 rears with 325/45 M&H Racemasters and planning a 17x8 Front. Problem is Height.Cant find a Performance Tire that matches up without either going Skinny or to an 18 inch Rim. Thx
__________________
'11 IBM 2SS/RS Built and Tuned by Vengeance Racing Vengeance PCM
Vengeance Racing Mast Black Label LS7 Headed 416 ProCharger Stage II D1X Race ,Monster Triple,Alky Control Meth Inj, Forgestar F14 Drag Version and a bunch of other blah blah blah.838/688 at 12lbs Street Friendly |
02-01-2018, 04:36 PM | #2 |
Drives: 2012 2SS/RS LS3 Join Date: May 2012
Location: Pearland, TX
Posts: 390
|
I would like to see this as well. I am 18" front and rear.
__________________
Victory Red 2012 2SS/RS LS3 Camaro
Pat G. Spec Cam from Cam Motion 228/236 .599/.599 112+2LSA Kooks 1-7/8" LTs w/ Cats Roto-Fab, Bo White TB, Borla Touring Catback 3.91 1LE Gears, MGW Tuned by Pat G |
02-01-2018, 04:47 PM | #3 |
Drives: 2015 Camaro 2SS Green Flash Edition Join Date: Dec 2015
Location: NW Arkansas
Posts: 200
|
I’m interested in a similar setup with the new Forgestar F14 dragpack. Anyone have them?
http://www.camaro5.com/forums/showthread.php?t=483634
__________________
Kooks stepped headers & Solo XL Cat-back
ADM CAI w/race scoop & Rotofab w/w relo GPI VVT SS1 cam and CNC ported heads milled .30 BTR .660 springs, Straub solid bushing trunions GPI rod-mod intake with I-M heat sheild Circle D 258mm Pro single disc 3700 rpm stall converter 169F thermostat & manual fan switch Tuned by Ryno at GPI - 455 RWHP / 416 lb-ft Last edited by GRNFLSH; 02-01-2018 at 05:05 PM. |
02-01-2018, 10:41 PM | #4 |
|
Was on their Website didn’t see 18” listed Have always loved that Wheel Style on the 5th Gen. Guess you could use the “standard” 18 on it.
http://www.forgestar.com/dragracing/
__________________
'11 IBM 2SS/RS Built and Tuned by Vengeance Racing Vengeance PCM
Vengeance Racing Mast Black Label LS7 Headed 416 ProCharger Stage II D1X Race ,Monster Triple,Alky Control Meth Inj, Forgestar F14 Drag Version and a bunch of other blah blah blah.838/688 at 12lbs Street Friendly |
02-02-2018, 06:12 AM | #5 | |
Drives: 2015 Camaro 2SS Green Flash Edition Join Date: Dec 2015
Location: NW Arkansas
Posts: 200
|
Quote:
https://1320wheels-com.3dcartstores....word=forgestar Options listed for 5th Gen: Fronts - 18x5 (skinny) and 18x8 Rears - 17x10.5 or 17x11 I’m interested in 18x8 front 17x10.5 rear, it looks like there are some good DR and front tire options that will work with this combo. I’ve also seen that Paul at PK Designs can order them as well, I plan to hit him up when I’m ready to buy.
__________________
Kooks stepped headers & Solo XL Cat-back
ADM CAI w/race scoop & Rotofab w/w relo GPI VVT SS1 cam and CNC ported heads milled .30 BTR .660 springs, Straub solid bushing trunions GPI rod-mod intake with I-M heat sheild Circle D 258mm Pro single disc 3700 rpm stall converter 169F thermostat & manual fan switch Tuned by Ryno at GPI - 455 RWHP / 416 lb-ft |
|
02-02-2018, 09:41 AM | #6 |
I have sold 100s of sets of 17x10 rears and 18x8 fronts when it comes to welds!
|
|
02-02-2018, 04:12 PM | #7 |
|
Thanks atomicfusion 🙂👍
__________________
'11 IBM 2SS/RS Built and Tuned by Vengeance Racing Vengeance PCM
Vengeance Racing Mast Black Label LS7 Headed 416 ProCharger Stage II D1X Race ,Monster Triple,Alky Control Meth Inj, Forgestar F14 Drag Version and a bunch of other blah blah blah.838/688 at 12lbs Street Friendly |
02-03-2018, 05:34 AM | #8 |
Drives: SSICKO Join Date: Jul 2010
Location: MA
Posts: 754
|
What tire is everyone running with the 18x8 front?
__________________
Slowhawk Performance Built & Tuned
|
02-03-2018, 08:18 AM | #9 |
Drives: 2015 Camaro 2SS Green Flash Edition Join Date: Dec 2015
Location: NW Arkansas
Posts: 200
|
Similar topic in this thread http://www.camaro5.com/forums/showth...=519362&page=2
I'd still like to hear from others...
__________________
Kooks stepped headers & Solo XL Cat-back
ADM CAI w/race scoop & Rotofab w/w relo GPI VVT SS1 cam and CNC ported heads milled .30 BTR .660 springs, Straub solid bushing trunions GPI rod-mod intake with I-M heat sheild Circle D 258mm Pro single disc 3700 rpm stall converter 169F thermostat & manual fan switch Tuned by Ryno at GPI - 455 RWHP / 416 lb-ft |
02-09-2018, 01:32 PM | #10 |
Writer
Drives: 2010 SS / 1967 Camaro Join Date: May 2009
Location: Chicago, IL
Posts: 7,221
|
18x8 front maybe look into 245 / __ / 18
__________________
PROJECT HEAVY CHEVY
Camaro Now: Mods for the Masses Part I | Part II 13.15@106 1.95 | 100% Stock 12.37@112 1.85 | + Kooks Headers/Cats + 20" 555R + CAI + BW TB + UDP + Tune 12.06@113 1.70 | + CD 3200 + 18" NT05R + RCR Intake + NE OTR + GPI Tune 11.84@115 1.59 | + 3.91s + Race Star 17x7 Fronts 10.90@125 1.47 | + GPI VVT Cam + BW Ported Heads + CD 3800 |
02-09-2018, 09:33 PM | #11 | |
|
Quote:
__________________
'11 IBM 2SS/RS Built and Tuned by Vengeance Racing Vengeance PCM
Vengeance Racing Mast Black Label LS7 Headed 416 ProCharger Stage II D1X Race ,Monster Triple,Alky Control Meth Inj, Forgestar F14 Drag Version and a bunch of other blah blah blah.838/688 at 12lbs Street Friendly |
|
|
|
Thread Tools | |
|
|