03-19-2018, 09:55 AM | #1 |
Drives: 2005 Pontiac GTO Join Date: Mar 2018
Location: Minnesota
Posts: 151
|
Putting in 3:91's and gear whine.
I know with my GTO, most guys that have moved to 3:91's, gear whine is a problem. Is it the same with Camaro's?
|
03-19-2018, 10:04 AM | #2 |
Account Suspended
Drives: 2013 2SS/RS Convertible Join Date: Apr 2016
Location: Lehigh Valley, PA
Posts: 3,873
|
Zero issues or noise with mine.
|
03-19-2018, 10:14 AM | #3 |
No issues or noise after mine were install
__________________
2015 Camaro 2SS/RS Mods - CAI, PTB, 3.91 gears - Sold
2018 Camaro 2SS Mods - None yet |
|
03-19-2018, 10:25 AM | #4 |
Drives: 2010 SS 2SS M6 Join Date: Aug 2016
Location: Smithsburg, Md.
Posts: 2,445
|
not even readin the post(remember ur on the ignore list) either your backlash is off or the crush collar was not set properly. provided you did use synthetic gear oil these have to be the problem unless the bearings were/are f's too?
I will take the first step because like I stated before, I like to help peeps when possible and since I have direct hands on experience with the item you are havin a prob with....if you PM me with basically a bye gones be bye gones (don't need no f@*kin apology!) message let's just put this sh!t behind us and I will un-ignore and see how close I was and what we can do to get this fixed ASAP! peace
__________________
2010 SS 2SS M6 - Tune by RDP dynoSteve!(Woot) - Daily Driver - 150K! - All work by me...
|
03-19-2018, 10:28 AM | #5 |
Drives: 2014 SIM 2SS Join Date: Sep 2015
Location: Charlotte, NC
Posts: 925
|
Lol, why bother putting them on your ignore list if you're not going to ignore them?
He asked if 3.91s whine, he doesn't have them or a problem at this time. |
03-19-2018, 10:37 AM | #6 |
Fast Cars and Old Guitars
Drives: 2015 2SS RS (L99, baby!) Join Date: Apr 2012
Location: N. CA
Posts: 4,026
|
Whining is always a set up problem* in a diff. With the exception of defective bearings, gears, but that is pretty rare.
*pinion depth, side to side on the ring carrier, etc. how does one make the ignore list and...how do you know who's on it?
__________________
“I don’t want to belong to any club that would have me as a member.” - Groucho Marx
|
03-19-2018, 04:07 PM | #7 |
That Cam though...
Drives: 11 Camaro 2SS 02 T/A WS6 15 SSV Join Date: Mar 2010
Location: NJ
Posts: 2,817
|
yeah mine are quiet. Like what everyone else said basically they shouldn't whine.
|
03-19-2018, 04:13 PM | #8 |
Drives: 2010 SS 2SS M6 Join Date: Aug 2016
Location: Smithsburg, Md.
Posts: 2,445
|
predicated on the title...I guess I would have said "will installin 3.91 gears cause whine"...but my offer to OP still stands...
as for the Ignore list...piss me off and find out....lulz! peace.
__________________
2010 SS 2SS M6 - Tune by RDP dynoSteve!(Woot) - Daily Driver - 150K! - All work by me...
|
03-19-2018, 04:21 PM | #9 |
Drives: 2005 Pontiac GTO Join Date: Mar 2018
Location: Minnesota
Posts: 151
|
|
03-19-2018, 09:27 PM | #10 |
Drives: 11' RJT 2SS/RS L99 Join Date: Jun 2014
Location: Chicago
Posts: 298
|
There was no noise increase at all for me when i had the 3.91 put in.
__________________
GPI VVT3 Cam
Circle D 3800 Single Disc Stall 1LE 3.91s Stainless Power Headers w/cats Fluidampr 25% UDP Cold Air Inductions Intake Bo White Ported Throttle Body ADM Trans Cooler Some BMR Goodies |
03-19-2018, 09:29 PM | #11 |
Account Suspended
Drives: 2011 2SS/ RS INFERNO ORANGE L99 Join Date: Dec 2012
Location: Alliston Ontario Canada
Posts: 9,057
|
No noise at all ....sounds stock after almost 2 years.
|
03-19-2018, 10:51 PM | #12 |
Russ
|
|
03-20-2018, 06:13 AM | #13 |
Drives: 2012 V6 Camaro 2010 Camaro SS Join Date: Jun 2010
Location: Tampa,Florida
Posts: 601
|
Pinion depth is more than likely off. I would correct this as it will put unwanted wear on your ring and pinion over time.
__________________
Mr. Clean
|
03-20-2018, 08:18 AM | #14 |
GPI Sales Consultant
|
I have a little noise with my 4.10 when I have it right at the perfect no-load point where I'm not accelerating or decelerating. I did go to a solid bushing so some noise was to be expected.
__________________
GPI Max Package 2.0: Brodix BR7 heads/GPI porting, MAX3 cam, ST2116LSR, BSR Max Lift rockers, LS7 LSXR with 103mm TB, Vararam OTR, Mcleod RXT, G-Force/Strange 9" IRS setup with 4.63 gear. 551whp, 11.1@124mph.
Got a question about a GPI product? Feel free to shoot me a message! |
|
|
Thread Tools | |
|
|