07-20-2020, 02:36 PM | #1 |
Fast Cars and Old Guitars
Drives: 2015 2SS RS (L99, baby!) Join Date: Apr 2012
Location: N. CA
Posts: 4,028
|
Is there a Grease Zerk on a 5th Gen Camaro?
I know I could probably look in the manual but are there ANY grease zerks/points to be found on our cars?
__________________
“I don’t want to belong to any club that would have me as a member.” - Groucho Marx
|
07-20-2020, 02:40 PM | #2 |
Drives: 2014 Camaro SS/RS 1LE 1967 Camaro Join Date: Oct 2013
Location: Fort Wayne, IN
Posts: 873
|
I was all over mine when it was on a lift, unless I missed something there are none to be found.
|
07-20-2020, 03:06 PM | #3 |
Fast Cars and Old Guitars
Drives: 2015 2SS RS (L99, baby!) Join Date: Apr 2012
Location: N. CA
Posts: 4,028
|
I was pretty sure that was the case. “Lubed for Life” is the modern way. (your mileage may vary)
__________________
“I don’t want to belong to any club that would have me as a member.” - Groucho Marx
|
07-20-2020, 03:24 PM | #4 |
Drives: 2010 CGM 2SS/RS LS3 Swapped A6 Join Date: Sep 2016
Location: Spring Hill, FL
Posts: 4,620
|
I haven't seen a single one on this car.
__________________
2010 CGM Camaro 2SS LS3 Swapped A6 - GPI LS3 SS1 .647/.638, (224/237, 112 +4, 7º overlap) on CamMotion 8620 core, BTR Platinum .660" Dual Spring kit w/titanium retainers, CHE bronze trunnion upgrade, stock heads milled @ .015, Melling HV 10296 oil pump, TSP 1-7/8" long tube headers (W/Catless Off-road Pipes), Corsa Xtreme 3" Catback, GPI Ported/Rod Mod Intake, Stage 2 Ported Throttle Body, Vararam OTR CAI, Mike Norris Gen 2 catch can + GM 1LE clean side separator, 160º thermostat - Megan Racing adjustable coilovers (lowered 1.75"), MRR M017 10/11" wheels-Tuned by Ryan @ GPI
|
07-20-2020, 04:35 PM | #5 |
Account Suspended
Drives: 2013 Sparkly Red One Join Date: Dec 2018
Location: Hospitality State
Posts: 2,558
|
Not on factory parts.
|
07-20-2020, 07:11 PM | #6 |
Stovebolt BluFlame 6
Drives: '12 2LT/RS, IBM; '20 Traverse Prem Join Date: Oct 2011
Location: Wherever!
Posts: 893
|
|
07-20-2020, 08:32 PM | #7 |
Drives: 2012 2SS Victory Red with white st Join Date: Jun 2016
Location: NC
Posts: 1,612
|
Can always add some
__________________
|
07-21-2020, 07:21 PM | #8 |
Drives: 2024 Camaro 2SS CE Convertible Join Date: Jul 2013
Location: Texas
Posts: 1,360
|
|
07-22-2020, 05:38 PM | #9 |
Account Suspended
|
No Zerk fittings, and if there are, then an aftermarket part was installed. My Mevotech
LCAs have them. |
07-22-2020, 06:08 PM | #10 |
Drives: 2012 2SS Victory Red with white st Join Date: Jun 2016
Location: NC
Posts: 1,612
|
You can add a zerk fitting to any part that is not solid. All it takes is the zerk, small drill bit and a tap. Then lube away
__________________
|
07-22-2020, 09:52 PM | #11 |
Drives: 2024 Camaro 2SS CE Convertible Join Date: Jul 2013
Location: Texas
Posts: 1,360
|
Didn’t have to do that to the truck. The holes were there they just had bolts in them. I thought how much more could an insert cost than a bolt?
|
|
|
Thread Tools | |
|
|