07-05-2022, 08:03 AM | #1 |
Drives: 2013 SS/RS, 2015 Camaro SS/RS Vert Join Date: Sep 2019
Location: Southern Nevada
Posts: 2,277
|
RPO Codes
The sales rep up in Oregon is going to send me a pic of the RPO codes for the 2015 SS/RS Comm Ed today that I bought. My question is this: I can find the 2012 codes on this site and others but nothing for 2015. Will they be the same?
|
07-10-2022, 07:55 PM | #2 |
07-10-2022, 07:58 PM | #3 | |
Drives: 2013 SS/RS, 2015 Camaro SS/RS Vert Join Date: Sep 2019
Location: Southern Nevada
Posts: 2,277
|
Quote:
|
|
07-10-2022, 08:29 PM | #4 |
Drives: 2013 SS/RS, 2015 Camaro SS/RS Vert Join Date: Sep 2019
Location: Southern Nevada
Posts: 2,277
|
Well crud, I can't find the RPO sticker anywhere. I've checked all the usual and some unusual places for it. Was something different done for these cars?
|
07-10-2022, 09:25 PM | #5 |
Drives: 2010 Camaro SS2,L99, LSA SC Join Date: Aug 2017
Location: Huntsville, AL
Posts: 2,282
|
It under the carpet in the trunk, driver’s side on mine but the convertible could be different
|
07-10-2022, 09:38 PM | #6 |
Drives: 2013 SS/RS, 2015 Camaro SS/RS Vert Join Date: Sep 2019
Location: Southern Nevada
Posts: 2,277
|
|
07-10-2022, 10:06 PM | #7 | |
Captain Gingerbeard
Drives: 2012 IOM RS/SS 6MT Join Date: Feb 2013
Location: West Twin Cities, MN
Posts: 2,489
|
If it's not on the driver's side of the trunk floor, I don't know where you should be looking.
__________________
Custom ordered 2012 6MT RS/SS on 11/25/2011. Picked up 01/31/12.
Pedders Coilovers, BMR trailing arms and toe-links, Prothane solid poly subframe bushings, JDP Motorsports rear upper control arm bushings, Texas Speed long-tube headers with 2" primaries, modified fully 3" Magnaflow competition catback. CAI cold-air intake. DBA rotors, Hawk pads. Quote:
|
|
07-10-2022, 10:20 PM | #8 |
Drives: 2013 SS/RS, 2015 Camaro SS/RS Vert Join Date: Sep 2019
Location: Southern Nevada
Posts: 2,277
|
|
07-10-2022, 10:21 PM | #9 |
Account Suspended
Drives: 2013 2SS/RS Convertible Join Date: Apr 2016
Location: Lehigh Valley, PA
Posts: 3,873
|
Mine is in the trunk as well.
|
07-10-2022, 10:28 PM | #10 |
Drives: 2013 SS/RS, 2015 Camaro SS/RS Vert Join Date: Sep 2019
Location: Southern Nevada
Posts: 2,277
|
|
07-11-2022, 07:17 AM | #11 |
Drives: 2011 Camaro SS Join Date: Dec 2016
Location: Midwest
Posts: 314
|
I suspect the matting is aftermarket and covered up your tag.
|
07-11-2022, 07:50 AM | #12 |
Drives: 2013 SS/RS, 2015 Camaro SS/RS Vert Join Date: Sep 2019
Location: Southern Nevada
Posts: 2,277
|
You know, I bet your right because that same stuff is on the spare-tire delete cover and I remember looking at it last night thinking that for a factory cut, it didn't seem very well trimmed, like someone had cut it to shape with shears.
|
07-11-2022, 08:42 AM | #13 |
Account Suspended
Drives: 2013 2SS/RS Convertible Join Date: Apr 2016
Location: Lehigh Valley, PA
Posts: 3,873
|
I added a nice carpeted embroidered trunk mat over the thin factory mat. Under that is the hard plastic cover over the fake spare/air compressor, which in turn is over the battery. When I lift the two mats the RPO tag is affixed to the metal floor.
|
07-11-2022, 09:51 AM | #14 |
Drives: 2012 Camaro 2SS/RS Vert LS3/M6 Join Date: Aug 2021
Location: Cheboygan, Michigan
Posts: 738
|
sounds like someone added sound deadening material and did a crap job of it..and yep, that stuff is EXTREMELY adhesive...you can maybe with a blow dryer peel it up, and then deal with the adhesive residue
|
|
|
Thread Tools | |
|
|