What Did You Do To Your Camaro Today? - Page 1824 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Camaro fanboy · 10-15-2022, 12:44 PM

Quote:

Originally Posted by joekono

Finally finished the splitter rivets and installed the curb alert, had the bowtie done a few months ago so I'm done with the front. I'll eventually get to the Sto n go for the plate, it might take me a long, long, long, long, long, long, long time to install it.

wow your car looks amazing.

ADVMax · 10-15-2022, 03:28 PM

Did the blend door hack and repaired the broken driver’s seat heater broken wire.

It all works again!

Everything that has failed to operate since I’ve had the car is repaired in a few hours today.

such a deal.

joekono · 10-15-2022, 03:34 PM

Quote:

Originally Posted by Camaro fanboy

wow your car looks amazing.

Thanks Camaro fanboy!!!!!! By the way, your stripes look amazing!!

Royal Tiger · 10-15-2022, 06:09 PM

Quote:

Originally Posted by ADVMax

Did the blend door hack and repaired the broken driver’s seat heater broken wire.

It all works again!

Everything that has failed to operate since I’ve had the car is repaired in a few hours today.

such a deal.

That’s awesome!!!!

redcoats1976 · 10-15-2022, 07:26 PM

Quote:

Originally Posted by ADVMax

Did the blend door hack and repaired the broken driver’s seat heater broken wire.

It all works again!

Everything that has failed to operate since I’ve had the car is repaired in a few hours today.

such a deal.

nice...i hope i never have to deal with the heater door.

joekono · 10-15-2022, 07:52 PM

Quote:

Originally Posted by redcoats1976

nice...i hope i never have to deal with the heater door.

ME TOO!!!!

BAD DAB · 10-16-2022, 12:10 AM

I washed, used clay bar, swirl & haze removal, polished and ceramic coated her today.

joekono · 10-16-2022, 06:26 AM

Quote:

Originally Posted by BAD DAB

I washed, used clay bar, swirl & haze removal, polished and ceramic coated her today.

WOW

, it actually looks like I'm looking into a mirror. Great job!!!

Beautiful CamaroGen5!!!!

ADVMax · 10-16-2022, 09:36 AM

Quote:

Originally Posted by BAD DAB

I washed, used clay bar, swirl & haze removal, polished and ceramic coated her today.

Ain’t it great when you spend all day doing something like that when you step back at the end of the day and see how awesome your baby looks!

dkpGen5 · 10-16-2022, 10:00 AM

I'm back. I had a 2010 2LT RS back in the day - sold it around 2015. I have a love for the '11 model since I like the Get 5 style, the '11 has HUD, first year for the convertible, and I personally like the steering wheel. Found a 2SS convertible about 750 miles away with 4.7k miles (now 5.5k miles) - flew out and drove her back to the KC Missouri area yesterday. Made for a long day, but worth it. I can't remember my old user name & the email associated with is lost, so I"m starting over with this name. It will go well with my '11 Corvette GS 6M coupe. This is a dealer pic as I got back 10 hours ago and will clean her up later.

0stones0 · 10-16-2022, 10:35 AM

Quote:

Originally Posted by dkpGen5

I'm back. I had a 2010 2LT RS back in the day - sold it around 2015. I have a love for the '11 model since I like the Get 5 style, the '11 has HUD, first year for the convertible, and I personally like the steering wheel. Found a 2SS convertible about 750 miles away with 4.7k miles (now 5.5k miles) - flew out and drove her back to the KC Missouri area yesterday. Made for a long day, but worth it. I can't remember my old user name & the email associated with is lost, so I"m starting over with this name. It will go well with my '11 Corvette GS 6M coupe. This is a dealer pic as I got back 10 hours ago and will clean her up later.

Welcome back and nice ride!

Modernmusclecar · 10-16-2022, 11:01 AM

This week ....
https://youtube.com/shorts/AGQIPkKGI60?feature=share

Tajefe Couple · 10-16-2022, 11:14 AM

Quote:

Originally Posted by dkpGen5

I'm back. I had a 2010 2LT RS back in the day - sold it around 2015. I have a love for the '11 model since I like the Get 5 style, the '11 has HUD, first year for the convertible, and I personally like the steering wheel. Found a 2SS convertible about 750 miles away with 4.7k miles (now 5.5k miles) - flew out and drove her back to the KC Missouri area yesterday. Made for a long day, but worth it. I can't remember my old user name & the email associated with is lost, so I"m starting over with this name. It will go well with my '11 Corvette GS 6M coupe. This is a dealer pic as I got back 10 hours ago and will clean her up later.

Welcome back and nice find! Has to feel good to be back in the saddle

Danial · 10-16-2022, 11:35 AM

Quote:

Originally Posted by BAD DAB

I washed, used clay bar, swirl & haze removal, polished and ceramic coated her today.

Beauteous!

I don't do it anymore, but I do miss the days when I would pull whatever hot rod I had at the time, into my back and go to work on it. I would typically start shortly after the sun came up and then spend half the day or more detailing everything.

I would have a cooler full of beer on ice, and more often than not, friends would pop in and out throughout the day, BS and drink a couple beers before moving on.

Man, I miss those days.

10-16-2022, 12:10 AM	#25529
BAD DAB Drives: 2010 Camaro 2SS/RS Black & Silver Join Date: Aug 2010 Location: Richmond, VA Posts: 8,230 View My Garage	I washed, used clay bar, swirl & haze removal, polished and ceramic coated her today. Attached Images __________________ STAINLESS WORKS HEADERS-TUNED BY JANNETTY RACING-C.A.I. INTAKE-TAYLOR 409 WIRES-SOLO AXLE BACK EXHAUST-ELITE CATCH CAN

10-16-2022, 10:00 AM	#25532
dkpGen5 Drives: 2011 2SS Convertible Join Date: Oct 2022 Location: Kearney, Mo Posts: 6	I'm back. I had a 2010 2LT RS back in the day - sold it around 2015. I have a love for the '11 model since I like the Get 5 style, the '11 has HUD, first year for the convertible, and I personally like the steering wheel. Found a 2SS convertible about 750 miles away with 4.7k miles (now 5.5k miles) - flew out and drove her back to the KC Missouri area yesterday. Made for a long day, but worth it. I can't remember my old user name & the email associated with is lost, so I"m starting over with this name. It will go well with my '11 Corvette GS 6M coupe. This is a dealer pic as I got back 10 hours ago and will clean her up later. Attached Images

10-16-2022, 11:01 AM	#25534
Modernmusclecar Drives: 2011 Camaro SS Join Date: Jul 2019 Location: Parts unknown Posts: 848	This week .... https://youtube.com/shorts/AGQIPkKGI60?feature=share __________________ EPS CUSTOM GRIND CAM....K@N CAI....VMAX PTB.....FRANKENSTEIN STAGE 2 HEADS ...1 7/8 STAINLESS POWER CATTED LONGTUBE HEADERS...CORSA XTREME 3 INCH CATBACK.....CIRCLE D 3800 Pro Series stall...391 gears.....Ported/modded GPI intake .Forgestar drag pack with Mickey Thompson ET street drag radials AGP PERFORMANCE DYNO TUNED. 463 WHP 428 FTLBS TORQUE.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 08:33 PM
Major Pedders Event in Houston! Saturday, Jan 30th! Meet DMS	Info@PeddersUSA.com	USA - Texas	39	02-01-2010 01:48 PM
Answeres to questions I have stumbled on	dieseldave24v	5th Gen Camaro SS LS LT General Discussions	13	02-23-2009 07:56 PM

10-15-2022, 03:28 PM	#25524
ADVMax Sporting Foole Drives: 2010 Camaro SS Join Date: Sep 2019 Location: Alabama Posts: 500	Did the blend door hack and repaired the broken driver’s seat heater broken wire. It all works again! Everything that has failed to operate since I’ve had the car is repaired in a few hours today. such a deal.