09-14-2023, 05:41 PM | #43 |
Drives: 2013 ZL1 Join Date: Nov 2018
Location: Mobile Al
Posts: 325
|
Code is for the LF mag ride sensor, I have one on order(one of the last ones on earth it appears)
Will update when I get it put on.
__________________
2013 ZL1 M6, 2.4 pulley and a few bolt ons. 590 wheel and 11.70@122 on a hard tire.
|
09-14-2023, 08:01 PM | #44 |
Drives: ZL1, 2013, tri-coat-red, manual Join Date: Nov 2013
Location: Michigan
Posts: 1,616
|
|
09-17-2023, 11:33 AM | #45 |
Drives: 2013 ZL1 Join Date: Nov 2018
Location: Mobile Al
Posts: 325
|
Car ID showed one, I have yet to get a shipping confirmation(bought on Thursday) so I may be SOL.
There are some used ones on EBAY and maybe I get get one from one of the guys who have went to coil overs.
__________________
2013 ZL1 M6, 2.4 pulley and a few bolt ons. 590 wheel and 11.70@122 on a hard tire.
|
09-18-2023, 11:24 AM | #46 |
Drives: 2013 ZL1 Join Date: Nov 2018
Location: Mobile Al
Posts: 325
|
The one from CARiD should be here today, let ya know if it fixes it.
I would recommend either taking the nuts off the tops of the struts and or popping the little arms off the lower control arms.
__________________
2013 ZL1 M6, 2.4 pulley and a few bolt ons. 590 wheel and 11.70@122 on a hard tire.
|
09-18-2023, 05:59 PM | #47 |
Drives: 2013 ZL1 Join Date: Nov 2018
Location: Mobile Al
Posts: 325
|
LF mag ride sensor fixed the code, she ret ta go
__________________
2013 ZL1 M6, 2.4 pulley and a few bolt ons. 590 wheel and 11.70@122 on a hard tire.
|
12-03-2023, 03:23 PM | #48 |
Drives: 2013 ZL1 Join Date: Nov 2018
Location: Mobile Al
Posts: 325
|
A heads up for the peeps who drop the cradle, I found my radiator out of it's upper holders today.
I would take them out when you drop the cradle as the upper radiator hose I think pulls the radiator towards the rear and they are dropped out of the holders because you dropped the cradle. If you dropped the cradle to do a clutch I would check the upper radiator holders and make sure they are still on the radiator.
__________________
2013 ZL1 M6, 2.4 pulley and a few bolt ons. 590 wheel and 11.70@122 on a hard tire.
|
|
|
Thread Tools | |
|
|