Pumpkin [COTW 12/5/11] - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Merc · 11-28-2010, 06:53 PM

I spent most of the day sorting pic's and posting in Pumpkin's Journal. Hope you enjoy.

speedster · 11-28-2010, 07:14 PM

Wow

Merc !!

You've been a busy guy today. Unbelievable amount of great pics. What beautiful country to drive around and through with your Camaro buds. Looks like you have a great group to hang with.

Pumpkin is lookin' incredible.

The underhood really stands out. I personally like the 315DRs, the much better exhaust and the kickin' tunes. Nice...

Merc · 11-28-2010, 07:16 PM

Next up install the rest of the BMR stuff. Starting this week.

1" Lowering springs
Sway Bars
All the Bushings front and rear

Merc · 11-28-2010, 07:21 PM

Quote:

Originally Posted by speedster

Wow

Merc !!

You've been a busy guy today. Unbelievable amount of great pics. What beautiful country to drive around and through with your Camaro buds. Looks like you have a great group to hang with.

Pumpkin is lookin' incredible.

The underhood really stands out. I personally like the 315DRs, the much better exhaust and the kickin' tunes. Nice...

Thx Bud. Quiet at work today. So I plugged away at it all day. By the time you see Pumpkin in Phoenix my bud Ken will have finnished under the hood. Lots more painting to go yet.

Merc · 11-28-2010, 07:27 PM

Almost forgot. When I broke the output shaft in Pumpkin.

I had the dealer throw in a fresh clutch while they were there.

Merc · 11-28-2010, 07:50 PM

I was lucky enough to recieve a litho from Mike (Super 60)

. So Colleen and I figured it would be cool to take a few shots of Pumpkin with the litho and send them to him. We sent a couple. Apparently one of the pic's ended up in the lunch room in Oshawa and one in Mikes office. Too Cool

. Pic's taken on the banks of the mighty Fraser River. (Worlds largest salmon producing rivers.

El Diablo · 11-28-2010, 11:06 PM

That's a pile of work you did today.We had a good time on that trip to Whistler and will be a blast next spring in Phoenix. Pumpkins looking good Bud.

the rich dude · 11-28-2010, 11:10 PM

Quote:

Originally Posted by mercuryman96

My car was stuck in Area 51 for 60 days. I knew it was in Anninacis Isle before the dealer did. They were not willing two call my bluff when I told them to deliver it by June 30th or keep it.

Area 51???

Merc · 11-28-2010, 11:31 PM

Quote:

Originally Posted by the rich dude

Area 51???

QC Hold= Area 51

the rich dude · 11-29-2010, 12:53 AM

Quote:

Originally Posted by mercuryman96

QC Hold= Area 51

For 60 days!!!!

Whats up with that?? I would have been raging for sure!!!

Merc · 11-29-2010, 08:33 AM

Quote:

Originally Posted by the rich dude

For 60 days!!!!

Whats up with that?? I would have been raging for sure!!!

Apparently the door panels had issues during molding and had to be re-done.

the rich dude · 11-29-2010, 09:16 AM

Quote:

Originally Posted by mercuryman96

Apparently the door panels had issues during molding and had to be re-done.

WOW!! At least you have your baby and have been enjoying it!!

How has your car been for reliablilty?? How has the 1-2 shift been on your tranny? Been seeing allot of people complaining about the 1-2 shift

Hoping mine doesn't have this issue. I have bought a MGW shifter but here shifters aren't fixing the problem for those that have it.

Merc · 11-29-2010, 11:44 AM

Quote:

Originally Posted by the rich dude

WOW!! At least you have your baby and have been enjoying it!!

How has your car been for reliablilty?? How has the 1-2 shift been on your tranny? Been seeing allot of people complaining about the 1-2 shift

Hoping mine doesn't have this issue. I have bought a MGW shifter but here shifters aren't fixing the problem for those that have it.

I Have a MGW shifter and I love it. I have no 1-2 problems. That being said I did break the output shat in my tranny.

the rich dude · 11-29-2010, 12:09 PM

Quote:

Originally Posted by mercuryman96

I Have a MGW shifter and I love it. I have no 1-2 problems. That being said I did break the output shat in my tranny.

Ya, I problem I hear with the early release cars. I believe thats been resolved now

11-28-2010, 07:14 PM	#30
speedster SST... Drives: SST Camaro 2010 Join Date: Oct 2008 Location: East Coast of Florida Posts: 5,927 View My Garage	Wow Merc !! You've been a busy guy today. Unbelievable amount of great pics. What beautiful country to drive around and through with your Camaro buds. Looks like you have a great group to hang with. Pumpkin is lookin' incredible. The underhood really stands out. I personally like the 315DRs, the much better exhaust and the kickin' tunes. Nice... __________________

11-28-2010, 07:27 PM	#33
Merc In The Circle Drives: 2010 Camaro 2SSRS IOM M6 Join Date: May 2009 Location: Abbotsford BC Canada Posts: 11,310	ACT/Stillen Clutch Almost forgot. When I broke the output shaft in Pumpkin. I had the dealer throw in a fresh clutch while they were there. Attached Images

11-28-2010, 07:50 PM	#34
Merc In The Circle Drives: 2010 Camaro 2SSRS IOM M6 Join Date: May 2009 Location: Abbotsford BC Canada Posts: 11,310	Pumpkin Litho I was lucky enough to recieve a litho from Mike (Super 60). So Colleen and I figured it would be cool to take a few shots of Pumpkin with the litho and send them to him. We sent a couple. Apparently one of the pic's ended up in the lunch room in Oshawa and one in Mikes office. Too Cool. Pic's taken on the banks of the mighty Fraser River. (Worlds largest salmon producing rivers. Attached Images

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Can ring and pinion be installed w/ pumpkin in car?	GMRULZ	V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6)	2	01-19-2011 08:33 PM
Pumpkin Fixed	Merc	Canada	12	10-24-2010 09:38 PM
Nekoosa Pumpkin Fest	blackgoldhtr	USA - Great Lakes	1	10-14-2010 09:18 PM
Pumpkin Gets Signed	Merc	Canada	9	09-04-2010 12:12 AM
Pumpkin is moving to the city	Noah	5th Gen Camaro SS LS LT General Discussions	0	11-27-2009 02:12 PM

11-28-2010, 06:53 PM	#29
Merc In The Circle Drives: 2010 Camaro 2SSRS IOM M6 Join Date: May 2009 Location: Abbotsford BC Canada Posts: 11,310	I spent most of the day sorting pic's and posting in Pumpkin's Journal. Hope you enjoy.

11-28-2010, 07:16 PM	#31
Merc In The Circle Drives: 2010 Camaro 2SSRS IOM M6 Join Date: May 2009 Location: Abbotsford BC Canada Posts: 11,310	Next up install the rest of the BMR stuff. Starting this week. 1" Lowering springs Sway Bars All the Bushings front and rear

11-28-2010, 11:06 PM	#35
El Diablo Drives: 67 Camaro rs/ 2010 Camaro SS/RS Join Date: Apr 2009 Location: Fort St. John B C / Vancouver Posts: 237	That's a pile of work you did today.We had a good time on that trip to Whistler and will be a blast next spring in Phoenix. Pumpkins looking good Bud.