Mike Norris is top notch! - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

McBeevee · 12-17-2010, 02:15 PM

Back in September, I took my car down to Mike's for a dyno tune. He was extremely thorough and squeezed out 421 at the wheels. At that time, I also inquired about a cam and all associated parts/labor. Mike suggested his preference for a good dual purpose cam that he has used many times to make good power by itself or with a blower (if I decide to go that direction).
The last week of October I worked out all the details and sent him a deposit. After waiting for all the parts to arrive and good weather so I could get the car down to him, he started Monday and by Wednesday afternoon, the car was done and ready for pickup. After the 60 mile drive home, all I can say is, I'm ecstatic. With the addition of the MNM cam, a V-Max ported manifold, and an underdrive pulley, my car netted 479/451. Every single time I've dealt with Mike, he has more than exceeded my expectations and I have very high standards. If you are looking for a shop to take care of your prized possession, than you needn't look any further. Give Mike Norris a call, you won't be disappointed.

Thanks again Mike!

ducatisl · 12-17-2010, 03:41 PM

Nice numbers Brent. You're going to have to come down here and run with us in Valdosta

SC2150 · 12-17-2010, 07:38 PM

mikepage0007 · 12-17-2010, 09:21 PM

mike, fixed me up when i did my kb @ extreme perf...tyler set it up for mike to tune and got me a safe tune @559rwhp and 520rwtq...now i got some lts,hi flow cats and dropping down to a 3 3/4 pulley and waiting to find out when mikes coming back to s florida to retune so i can install it

Indpowr · 12-17-2010, 09:38 PM

I guess you should change your user ID now then.

Mike is great guy.. He did work for me a while ago.

McBeevee · 12-18-2010, 12:24 AM

Quote:

Originally Posted by Indpowr

I guess you should change your user ID now then.

Mike is great guy.. He did work for me a while ago.

Not hardly.....the next mods are already in the planning stages.

12-17-2010, 02:15 PM	#1
McBeevee 220/221 whatever it takes Drives: See sig.... Join Date: Jun 2010 Location: Lafayette In Posts: 1,132	Mike Norris is top notch! Back in September, I took my car down to Mike's for a dyno tune. He was extremely thorough and squeezed out 421 at the wheels. At that time, I also inquired about a cam and all associated parts/labor. Mike suggested his preference for a good dual purpose cam that he has used many times to make good power by itself or with a blower (if I decide to go that direction). The last week of October I worked out all the details and sent him a deposit. After waiting for all the parts to arrive and good weather so I could get the car down to him, he started Monday and by Wednesday afternoon, the car was done and ready for pickup. After the 60 mile drive home, all I can say is, I'm ecstatic. With the addition of the MNM cam, a V-Max ported manifold, and an underdrive pulley, my car netted 479/451. Every single time I've dealt with Mike, he has more than exceeded my expectations and I have very high standards. If you are looking for a shop to take care of your prized possession, than you needn't look any further. Give Mike Norris a call, you won't be disappointed. Thanks again Mike! __________________ Brent 2022 BMW X5 M50i 2022 Ram TRX 2021 GT500 CFHP 2016 Challenger Hellcat A8 1058whp/898wtq 1970 Chevelle SS396 4spd Last edited by McBeevee; 12-17-2010 at 02:26 PM.

12-17-2010, 03:41 PM	#2
ducatisl Emerald Coast Camaros Drives: 2010 2SS 6m Join Date: Mar 2010 Location: Fort Walton Beach...surrounded by da** pickup trucks I can't see around! Posts: 692 View My Garage	Nice numbers Brent. You're going to have to come down here and run with us in Valdosta __________________ Procharged F1A-94 on a 416 LSA block, Callies/Manley/Scat/Melling/Cloyes/ARP/Ferrea/Landspeed/Hi-Ram/FIC/Tick/Alky/ Strange/QA1/DSS/BMR/RPS/Tilton/GZM/Fore/AEM/ATi/JGS etc., built/tuned by me and Innovative Street Technologies 'Mo's Seemingly Endless Build Thread

12-17-2010, 09:21 PM	#4
mikepage0007 Drives: 2010 camaro Join Date: Aug 2009 Location: port st lucie ,florida Posts: 4,273	mike, fixed me up when i did my kb @ extreme perf...tyler set it up for mike to tune and got me a safe tune @559rwhp and 520rwtq...now i got some lts,hi flow cats and dropping down to a 3 3/4 pulley and waiting to find out when mikes coming back to s florida to retune so i can install it __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Mike Norris Motorsports Is Here For Y'all	Mike Norris	USA - Southeast	13	08-21-2009 07:45 PM
Mike Norris Motorsports Magnacharger Installed Packages - $7495 Plus $500 in MNM $$$	Mike Norris	Forced Induction	9	08-03-2009 10:51 PM
Mike Norris Motorsports Tuning in Ft Walton Beach, FL Aug 7th & 8th	Mike Norris	USA - Southeast	0	08-02-2009 03:21 PM
Mike Norris Motorsports Magnacharger Package Info	Mike Norris	USA - Southeast	0	07-31-2009 09:47 PM
FOX SPORTS ANNOUNCER MIKE JOY sent ME an Email!	camaro5	General Automotive + Other Cars Discussion	0	10-18-2008 05:40 PM

12-17-2010, 07:38 PM	#3
SC2150 Account Suspended Drives: 2012 Camaro RS, RX supercharged Join Date: Dec 2009 Location: Bradenton, FL Posts: 6,063

12-17-2010, 09:38 PM	#5
Indpowr Account Suspended Drives: Corvette C6 Join Date: May 2008 Location: Florida Posts: 6,959 View My Garage	I guess you should change your user ID now then. Mike is great guy.. He did work for me a while ago.