acs T3 mesh available - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

twentytwelvebee · 01-25-2012, 08:31 PM

just saw these on their site

http://www.acscomposite.com/store/#e...roduct=8974690

CyberDan · 01-25-2012, 10:02 PM

100$ damn

TRC-SS · 01-26-2012, 01:53 AM

Awsome....Nice find.

Im still waiting to see their mesh DRL bracket they are supposedly making

626ortiz · 01-26-2012, 03:22 AM

Pretty expensive stuff for some chicken wire =X

montreal2010yellow · 01-26-2012, 05:38 AM

I like.

GMteSSted · 01-26-2012, 06:49 AM

Quote:

Originally Posted by CyberDan

100$ damn

Got to tell you, I've been trying to make some custom parts. I've recenlty learned injected molds, plastic or aluminum, are very expensive to make. So, the parts end up being pricey no matter how simple they look.

Angelsilhouette · 01-26-2012, 09:23 AM

Very nice, though I would have preferred a honeycomb look to the mesh rather than the hardware store special look.

zkdreads · 01-26-2012, 10:07 AM

cant u make that yourself for like umm $25

twentytwelvebee · 01-26-2012, 12:41 PM

here's what i came up with. however, i'm putting some 1"x4" lights in so i had to start over.

Quote:

Originally Posted by Angelsilhouette

Very nice, though I would have preferred a honeycomb look to the mesh rather than the hardware store special look.

TRC-SS · 01-26-2012, 07:24 PM

I understand mesh is cheaper than $100, but im more interested on how it actually attaches to the port rather then other methods i have seen

ACS Composite · 01-26-2012, 09:42 PM

This is it, by cutting on side of the inner bracket it will fit with our DRL bracket. We wanted to make sure all parts we offer for the T3 were interchangeable.

Quote:

Originally Posted by TRC-SS

Awsome....Nice find.

Im still waiting to see their mesh DRL bracket they are supposedly making

ACS Composite · 01-26-2012, 09:45 PM

You can PM me, we can replace the mesh with honeycomb (Same price, just special order) Our current 33-4-046 is in plastic mesh... on not the mesh you'd find at the hardware store.

Quote:

Originally Posted by Angelsilhouette

Very nice, though I would have preferred a honeycomb look to the mesh rather than the hardware store special look.

TRC-SS · 01-26-2012, 09:53 PM

Quote:

Originally Posted by ACS Composite

You can PM me, we can replace the mesh with honeycomb (Same price, just special order) Our current 33-4-046 is in plastic mesh... on not the mesh you'd find at the hardware store.

Yup....I will go Honeycomb also

TRC-SS · 01-26-2012, 09:55 PM

Quote:

Originally Posted by ACS Composite

This is it, by cutting on side of the inner bracket it will fit with our DRL bracket. We wanted to make sure all parts we offer for the T3 were interchangeable.

Oh ok....in my head i was picturing the mesh surrounding the DRL so it looked like the Light was sitting in the mesh. All Good.

01-25-2012, 08:31 PM	#1
twentytwelvebee Drives: 2012/2ss "transformers edition" Join Date: Oct 2011 Location: vacaville Posts: 528	acs T3 mesh available just saw these on their site http://www.acscomposite.com/store/#e...roduct=8974690

01-25-2012, 10:02 PM	#2
CyberDan Drives: 1SS Camaro Join Date: Sep 2010 Location: Texas Posts: 661	100$ damn __________________ CAI Cold Air Intake, VMax CNC TB, Borla Sport Catback Exhaust, EE Oil Catch Can, Eibach Sway Bars and Drop Springs, AAC concept side markers, stealth signal bulbs, Heritage grille, Sparks Restorations front and rear modern SS emblems

01-26-2012, 01:53 AM	#3
TRC-SS 700RWHP-650TQ Drives: 2011 Forged LS3 Supercharged/Cammed Join Date: Aug 2010 Location: Shrewsbury Massachusetts Posts: 5,269 View My Garage	Awsome....Nice find. Im still waiting to see their mesh DRL bracket they are supposedly making __________________ View Build HERE>>>>>MY 2011 2SS/RS JOURNAL

01-26-2012, 05:38 AM	#5
montreal2010yellow Drives: 2 LT/RS YELLOW, AUTO., VIN NO. 602 Join Date: May 2010 Location: LAVAL (10 min. north of Montreal), CANADA Posts: 3,526 View My Garage	I like. __________________ T2 Facia, ACS TL1 Hood, ACS Winglets. G5CR CAI. Hotchsic Strut Brace and more...

01-26-2012, 09:23 AM	#7
Angelsilhouette Drives: 2011 Camaro 2LT RS, Red Jewel Join Date: Apr 2011 Location: LA (Lower AlaBAMa) Posts: 588 View My Garage	Very nice, though I would have preferred a honeycomb look to the mesh rather than the hardware store special look. __________________ Still not quite done.

01-26-2012, 03:22 AM	#4
626ortiz Drives: camaro 2ss Join Date: Jul 2011 Location: riverside, ca Posts: 225	Pretty expensive stuff for some chicken wire =X

01-26-2012, 10:07 AM	#8
zkdreads Drives: 2010 Camaro LS V6 Join Date: Jul 2010 Location: Tampa, Florida Posts: 2,784	cant u make that yourself for like umm $25 __________________ C-LO or Sonic "Without Struggle there is no progress" I am your best nightmare!

01-26-2012, 07:24 PM	#10
TRC-SS 700RWHP-650TQ Drives: 2011 Forged LS3 Supercharged/Cammed Join Date: Aug 2010 Location: Shrewsbury Massachusetts Posts: 5,269 View My Garage	I understand mesh is cheaper than $100, but im more interested on how it actually attaches to the port rather then other methods i have seen __________________ View Build HERE>>>>>MY 2011 2SS/RS JOURNAL

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: GFX Outlets add Wire Mesh and Paint, Muffler Delete	Li0nel1234	Camaro DIY & HOW-TO instructions & discussions	25	01-07-2017 07:36 PM
ACS Camaro with T3 fascia and SS9 Hood	ACS Composite	Camaro Photos \| Spyshots \| Video \| Media Gallery	219	04-22-2012 11:35 PM
T3 ports mesh options by River City Creations & Lighting	overhaulengines	Cosmetics and Lighting Modification Discussions	29	01-19-2012 09:10 PM
ACS T3 PORTS BILLET & MESH INSERTS !!	Unique Auto Depot	Exterior Parts & Accessories	59	12-14-2011 05:17 PM
ACS Camaro with T3 fascia and SS9 Hood	ACS Composite	Exterior Parts & Accessories	43	10-15-2011 01:41 AM