Installed strips for $547.00

[quanine10]

Originally Posted by Milk 1027

Rally stripes are $395

Please go here to verify what your dealer is charging for installation.
http://www.gm.oeaccessories.com/Home/index.aspx

the average total is $500-$580

I believe they are 470 at msrp.

[Rodrunner]

Originally Posted by quanine10

That makes sense. So since now that I am at 3400 and I decided to order the stripes, would it show up on window sticker? Also if it doesn't show up on window sticker do you all think that's a decent deal, only 77.00 for installation. If they screwed up my strips and I wasn't satisfied, would my dealer be required to order more stripes at his on expense?

Rolnslo is correct, but it's too late to add the stripes if you're at 3400. You'll have to purchase them through GM Accessories online or GMPP through your dealer and installation will be extra. At CamaroScotty's parts dept. site, http://www.gm.oeaccessories.com/newman/ the installation is $198.00

[Milk 1027]

Originally Posted by quanine10

I believe they are 470 at msrp.

MSRP is $395
dealers charge differently for installation.

[CamaroScotty]

$198 to install.....You could always BUY THEM SOMEWHERE ELSE, and have them installed somewhere else.

$395 is MSRP for the stripes....but we're selling them for $335.75 + Shipping.

[fdjizm]

i would take them home and do it vinyl is super easy to install i would pay someone 50 bucks to pass a squeegie over some wet plastic. i did my stripes in 30 minutes.. not including cutting, and the gm ones come precut.

[hiredgun]

The average joe wont be able to put the stripes on . your flat Mustang Hood would be no problem, but the scoop area as it tapers down to the from will pose a problem for a rookie.
Pay some one to do them! You guys just spent 40+ on a car ....geez

[Embalmer]

Originally Posted by fdjizm

i would take them home and do it vinyl is super easy to install i would pay someone 50 bucks to pass a squeegie over some wet plastic. i did my stripes in 30 minutes.. not including cutting, and the gm ones come precut.

He's got a point. After seeing them installed I thought I could probably install them myself .... it's really not hard at all IMO. But at least if they screw up - they have to redo them - just like they are doing for my rears.

[fdjizm]

Originally Posted by Embalmer

He's got a point. After seeing them installed I thought I could probably install them myself .... it's really not hard at all IMO. But at least if they screw up - they have to redo them - just like they are doing for my rears.

you get 10 minutes to screw up with wet vinyl... lay it down squeegie the air bubbles out, let dry lol not worth anywhere near a hundred bucks.

[hiredgun]

Originally Posted by fdjizm

you get 10 minutes to screw up with wet vinyl... lay it down squeegie the air bubbles out, let dry lol not worth anywhere near a hundred bucks.

Till you get the side over the scoop LOL have fun

[LosXC451]

:sm2: