03-14-2012, 06:46 PM | #1 |
Drives: SGM, 2011 2SS/RS, L99 Join Date: Oct 2011
Location: Wildcat Country
Posts: 593
|
What to do about exhaust pipes squeaking?
I checked them on a lift and sure enough its the pipes. The mid-muffler doesn't lay flat on the center brace anymore since I added the axle-back and headers so the whole thing sways( I believe) when I make turns causing it to squeak. If anyone has had this problem or just has some ideas on what I can do to help support the pipes better I'd appreciate it. Maybe tac some hang-out to the pipes or shim the center brace to support the mid-muffler? Thanks.
__________________
K&N air intake, Solo w/Jpipes axleback, SP 1 7/8 LT headers
|
03-14-2012, 08:04 PM | #2 |
Dont H8 Me Cuz U Aint Me
Drives: 2016 SS Sedan, 2017 Explorer Sport Join Date: Feb 2010
Location: Tulsa, Oklahoma
Posts: 2,910
|
exhaust shouldnt touch center brace may cause KR and a loss of power. Try loosening catback joints and lifting with a floor jack in the center and re-tightening the exhaust joints to raise it.. If you do not get .5" of space you may want to try adding some spacers to your brace. :-)
__________________
|
03-14-2012, 09:01 PM | #3 |
Drives: 2010 2ss m6 Join Date: Aug 2011
Location: staten island, ny
Posts: 511
|
+1 to the last post...I lossened everything while the rear was way in the air, put a small jack with a peice of wood under where the brace is. Jacked it up about an inch and and tiightened everything up... However, once I went to 3" pipes, I did away with the tunnel brace all together. i have not noticed any ossues what so ever by removing it.
__________________
2010 2ss M6, TSP 1 7/8 Long Tube headers,dual electric cutouts, 3" pipes all the way back to magnaflows. elite engineering catch can, custom painted engine cover,CAI cold air intake, apex cold air racescoop, jannety racing 470 hp kit, custom JRE hot rough idle blower cam, jannety racing dyno tuned. pfadt lowering springs, lsr short throw shifter, custom sub setup,sony 7" indash nav, interior stiching dye, 20% tint all around, HAVOC spoiler, tail light black out, chevy emblem black out, seibon BBII carbon fiber hood,Front and rear bowtie blackouts. 461 rwhp and not done yet!
|
03-14-2012, 09:27 PM | #4 |
Drives: SGM, 2011 2SS/RS, L99 Join Date: Oct 2011
Location: Wildcat Country
Posts: 593
|
I still have the stock resonator from the L99 and I know its fairly heavy but its not resting on the center brace anymore. Maybe the weight of the resonator is playing a part the squeaking sound. I plan to have a resonated x-pipe installed in its place do your think this will help?
__________________
K&N air intake, Solo w/Jpipes axleback, SP 1 7/8 LT headers
|
03-14-2012, 10:11 PM | #5 |
Drives: 2010 2ss m6 Join Date: Aug 2011
Location: staten island, ny
Posts: 511
|
a new x pipe will help alot...that stock resonator is a freakin beast...the new x pipe will allow the system to be more flexible and will stay in place better when torqued down
__________________
2010 2ss M6, TSP 1 7/8 Long Tube headers,dual electric cutouts, 3" pipes all the way back to magnaflows. elite engineering catch can, custom painted engine cover,CAI cold air intake, apex cold air racescoop, jannety racing 470 hp kit, custom JRE hot rough idle blower cam, jannety racing dyno tuned. pfadt lowering springs, lsr short throw shifter, custom sub setup,sony 7" indash nav, interior stiching dye, 20% tint all around, HAVOC spoiler, tail light black out, chevy emblem black out, seibon BBII carbon fiber hood,Front and rear bowtie blackouts. 461 rwhp and not done yet!
|
03-15-2012, 11:43 AM | #6 |
Drives: SGM, 2011 2SS/RS, L99 Join Date: Oct 2011
Location: Wildcat Country
Posts: 593
|
Cool, thanks for your input.
__________________
K&N air intake, Solo w/Jpipes axleback, SP 1 7/8 LT headers
|
03-15-2012, 03:34 PM | #7 |
Search Ninja
Drives: 2010 Black 2SS/RS A6 Join Date: Oct 2009
Location: Central Ark
Posts: 7,183
|
The point is, it should have NEVER rested on the tunnel brace. There should be a large enough gap to keep it from resting or even hitting the tunnel brace. If it's squeaking, something isn't tight enough. If it's "thumping" when you drive on bumpy roads, it's hitting the brace. Each has a different fix.
__________________
2010 Black 2SS/RS A6
Halltech CF 102 fed GPI modded intake manifold Bo (knows) White ported TB Kooks LT's/ Dynomax VT Pfadted (springs/sways) Dyno tuned by Rhino and GPI I once parallel parked a train. |
03-15-2012, 05:41 PM | #8 |
Drives: SGM, 2011 2SS/RS, L99 Join Date: Oct 2011
Location: Wildcat Country
Posts: 593
|
No thumps it just squeaks. I tightened everything the other day and it still squeaked. I'm positive its the exhaust system, from headers to tips. You can shake the pipes right after the cats and before the resonator and it makes the exact same squeaking sound. Hoping after installing the x-pipe that it will make a difference. Like others said I may have to loosen the clamps and jack up the center pipes and then tighten up the clamps.
__________________
K&N air intake, Solo w/Jpipes axleback, SP 1 7/8 LT headers
|
|
|
Thread Tools | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
V8 Camaro Aftermarket Exhaust Video Clips Compilation | tjbusa | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 591 | 07-06-2022 08:38 AM |
Back pressure and the camaro... | SS>GT | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 80 | 12-03-2012 03:39 PM |
Thinking about going 2.5" the entire System | mike.nite | Camaro V6 LLT Engine, Exhaust, and Bolt-Ons | 12 | 01-11-2011 03:57 PM |
Black soot in exhaust pipes? | rolnslo | Camaro V6 LLT Engine, Exhaust, and Bolt-Ons | 24 | 08-18-2010 10:07 PM |
(UPDATED) Stainless Works exhaust and header systems!! (Tag's SS w/ HP #'s) | Milk 1027 | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 162 | 07-09-2009 06:39 AM |