Adding a ZL1 front end to your car. - Page 141 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

2SSRS@Gen5diy · 03-19-2012, 02:38 PM

Here you go.

garcmol · 03-19-2012, 02:40 PM

I'm thinking of ordering the wheel wells as well. Not so much for the ducts or vents, but for my Injen intake. It sits right were the green circle is in the above picture

I have the hydro shield and have driven through the rain since having the fascia installed with no problems. But, this would be a little more piece of mind.

nak3dsnake · 03-19-2012, 02:44 PM

Will the ducts and baffles fit a car without the ZL1 bumper? I'd be interested in adding them if it did.

bigsquirrel · 03-19-2012, 03:07 PM

Quote:

Originally Posted by KBruno

Yes, the undertray without some alternate extractor is bad (excess drag & reduced cooling effect).

The ZL1 wheel-wells have part of the brake duct system molded in but I'm not sure what you mean by them being "necessary to keep the airflow positive."

Don't want to thread jack, what about the classic industries underpan, or the ADP Splitter. the trays only go back about half as far as the ZL1.

Ray@RDS · 03-19-2012, 03:32 PM

Quote:

Originally Posted by nak3dsnake

Will the ducts and baffles fit a car without the ZL1 bumper? I'd be interested in adding them if it did.

I do not think so, You need the lower splitter to connect one section of the brake duct,and you need the splash shield(fender liner to connect the other half.

notagoat · 03-19-2012, 06:00 PM

Getting my parts today! I have to take the bumper to get painted before installation though. For those without an RS that have done this, were you able to reuse your fogs? Thanks!

LIV4MUDDIN · 03-19-2012, 06:38 PM

Quote:

Originally Posted by notagoat

Getting my parts today! I have to take the bumper to get painted before installation though. For those without an RS that have done this, were you able to reuse your fogs? Thanks!

You can reuse the fogs from the RS. Just need the black rings to hold them in. I get my setup end of this week. Mines coming painted and lines modded.

verboten · 03-19-2012, 09:37 PM

[QUOTE=KBruno;4669808]Yes, the undertray without some alternate extractor is bad (excess drag & reduced cooling effect).

I don't agree. The front intake brings cool air to the radiator, but more importantly the engine. A cooler engine is more efficient and can create more power. Without the undertray the air will travel a course of least resistance nd low pressure and get sucked under the car. Th undertray directs the air to the engine and then out the back and sides, benefiting both the engine and lower turbulence.

MValdez17 · 03-19-2012, 11:08 PM

Quote:

Originally Posted by 2SSRS

Here you go.

Did you get both pieces?? My parts guy keeps telling me they are not available yet. I'll see what he says tomorrow...

MValdez17 · 03-19-2012, 11:14 PM

Quote:

Originally Posted by bigsquirrel

They are vented though right?

Wheel liners have a hole yes. They themselves need the other brake cooling ducts to push air to the brakes.
Brake cooling ducts we believe either attach to the ZL1 splitter or the the air duct itself(Center section to push air into radiator). 2SSRS probably knows how they are installed??

2SSRS@Gen5diy · 03-19-2012, 11:22 PM

I got 2 pc, but its only 1/2 of it.

MValdez17 · 03-19-2012, 11:30 PM

Quote:

Originally Posted by 2SSRS

I got 2 pc, but its only 1/2 of it.

So you need #3 part. I just realized they attach to the ZL1 lower splitter...
Were you able to order the #3 parts too?

2SSRS@Gen5diy · 03-19-2012, 11:32 PM

No. but we try everyday.

notagoat · 03-20-2012, 08:53 AM

Quote:

Originally Posted by LIV4MUDDIN

You can reuse the fogs from the RS. Just need the black rings to hold them in. I get my setup end of this week. Mines coming painted and lines modded.

Thanks for the reply! I know the RS lights fit, but what about non-RS? I have a non-RS with AAC plasmas and really want to reuse them.

03-19-2012, 02:38 PM	#1961
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,728 View My Garage	Here you go. Attached Images

03-19-2012, 02:40 PM	#1962
garcmol Drives: 10 1LT SIM; 91 B4C sleeper Z Join Date: Aug 2009 Location: Ft. Mitchell, Alabama Posts: 7,198	I'm thinking of ordering the wheel wells as well. Not so much for the ducts or vents, but for my Injen intake. It sits right were the green circle is in the above picture I have the hydro shield and have driven through the rain since having the fascia installed with no problems. But, this would be a little more piece of mind. __________________ Pedders Pace Car Package, Injen CAI, Flowmaster AT, AAC Lighting, ZL1 fascia/skirts, RKSport Ram Air hood, vented fenders, painted stripes (Gary's Customz), Honor and Valor badged (Thank you, John)

03-19-2012, 06:00 PM	#1966
notagoat Drives: 2015 BMW M4 Join Date: Apr 2010 Location: Jacksonville, FL Posts: 333	Getting my parts today! I have to take the bumper to get painted before installation though. For those without an RS that have done this, were you able to reuse your fogs? Thanks! __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CAMARO WIKI	Tran	Wiki	67	11-27-2024 09:02 AM
Gran Turismo 5 November 24th, 2010	Nezacant	Gaming Lounge	562	04-21-2011 10:23 PM
Winner, winner - Jalopnik compares the Big 3	Number 3	5th Gen Camaro SS LS LT General Discussions	31	04-17-2011 04:24 PM
Pedders Suspension Benchmark Track Testing and New Jersey Track Day	Info@PeddersUSA.com	USA - NY / NJ / PA	35	10-26-2009 06:20 PM
#4768 - Delivered and Made Ready the Right Way!	Number_9	5th Gen Camaro SS LS LT General Discussions	62	07-16-2009 03:42 AM

03-19-2012, 02:44 PM	#1963
nak3dsnake Drives: 2010 Camaro IBM 2LT/RS M6 Join Date: Sep 2009 Location: Columbus, OH Posts: 2,282 View My Garage	Will the ducts and baffles fit a car without the ZL1 bumper? I'd be interested in adding them if it did.

03-19-2012, 09:37 PM	#1968
verboten Drives: Black Join Date: Jan 2010 Location: Chicago Posts: 562	[QUOTE=KBruno;4669808]Yes, the undertray without some alternate extractor is bad (excess drag & reduced cooling effect). I don't agree. The front intake brings cool air to the radiator, but more importantly the engine. A cooler engine is more efficient and can create more power. Without the undertray the air will travel a course of least resistance nd low pressure and get sucked under the car. Th undertray directs the air to the engine and then out the back and sides, benefiting both the engine and lower turbulence.

03-19-2012, 11:22 PM	#1971
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,728 View My Garage	I got 2 pc, but its only 1/2 of it.

03-19-2012, 11:32 PM	#1973
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,728 View My Garage	No. but we try everyday.