ANNOUNCMENT: JDP Motorsports is Finalizing it's Color Changing RS Halo Package!

[LS3 SS]

Originally Posted by cubjag

The instructions to reprogram the remote have been posted in this thread a few times.

Why not repost it and help him.

[chozn4service]

Originally Posted by LS3 SS

Why not repost it and help him.

Thanks LS3 SS, but I got reprogramming info and no luck on my problem so I've directed questions to JDP direct so we don't have to get these post.

[toesuf94]

FOR THOSE WHO ARE ABOUT TO DO THE INSTALL: THERE IS AN EASIER WAY TO GET THE HALO LED HOLDER LOOSE!! TAKE THE LONG TORX BIT AND A 1/4" BOX END WRENCH. Hold the tip on the screw with one finger pressing down on the bit while turning the bit with the box end wrench. You will not strip the bolt head AND you will be able to get to the awkward bolt you cannot see. VERY SIMPLE.

[cubjag]

Originally Posted by LS3 SS

Why not repost it and help him.

Me telling him his answer is in the thread isn't helping? I'm sorry my service didn't live up to your standards.

[572HP]

Jeremy or Jordan, would you please update your first post with the instructions or link to the instructions for reprogramming the remote? I agree that searching through 25 pages might just be a real pain.

[LS3 SS]

Originally Posted by cubjag

Me telling him his answer is in the thread isn't helping? I'm sorry my service didn't live up to your standards.

[jordan 572]

Originally Posted by LS3 SS

cubjag

Anyway, what are the issues with this kit? I don't want to buy yet unless it works.

[MackMan]

Originally Posted by jordan 572

cubjag

Anyway, what are the issues with this kit? I don't want to buy yet unless it works.

It does work. You can see by the people that have posted finished pictures. There are lemons in any batch of electronics. This kit is great, high quality. Take the leap and make your headlights awesome!

[jordan 572]

Originally Posted by MackMan

It does work. You can see by the people that have posted finished pictures. There are lemons in any batch of electronics. This kit is great, high quality. Take the leap and make your headlights awesome!

Thanks, I was afraid you were going to say read 25 pages. Are the problems isolated? How long is the back up on these?

[DCC1464]

Originally Posted by toesuf94

FOR THOSE WHO ARE ABOUT TO DO THE INSTALL: THERE IS AN EASIER WAY TO GET THE HALO LED HOLDER LOOSE!! TAKE THE LONG TORX BIT AND A 1/4" BOX END WRENCH. Hold the tip on the screw with one finger pressing down on the bit while turning the bit with the box end wrench. You will not strip the bolt head AND you will be able to get to the awkward bolt you cannot see. VERY SIMPLE.

haha this is what i ended up doing cause my T10 was to long, worked great!

Originally Posted by MackMan

This wallpaper worthy!




That's awesome! How'd you get the grill lighting to change colors at the same time?

Mackman if you want to know about the grill lighting PM me and i can walk you through it

[MackMan]

Originally Posted by jordan 572

Thanks, I was afraid you were going to say read 25 pages. Are the problems isolated? How long is the back up on these?

I believe they are isolated. They've sold over 100 of these and I think delivered that many now so there are always issues with things rapidly reproduced. Just test them before installing and you'll be set. I didn't do that, but mine came out working great. Just had to switch one of the connectors around coming out of the box. Didn't think it mattered which one went where, but apparently it did. Lol.

[h2oplay]

Originally Posted by MackMan

I believe they are isolated. They've sold over 100 of these and I think delivered that many now so there are always issues with things rapidly reproduced. Just test them before installing and you'll be set. I didn't do that, but mine came out working great. Just had to switch one of the connectors around coming out of the box. Didn't think it mattered which one went where, but apparently it did. Lol.

Yep, coming out of the box there are a couple possibilities with one of the connectors, one has 2 conductors, the other has 4, just have to match those up correctly.....

[MackMan]

Originally Posted by h2oplay

Yep, coming out of the box there are a couple possibilities with one of the connectors, one has 2 conductors, the other has 4, just have to match those up correctly.....

Ahhh I see. Must have missed that memo. I felt like Clark Griswold when he had his house lights setup for Christmas and he flips that switch and nothing turned on and he kept trying and trying then someone plus in the power cable lol. I was so disappointed when I first hit that switch and didn't get anything but started with the easy stuff, the connectors haha.

[LS3 SS]

Originally Posted by jordan 572

cubjag

Anyway, what are the issues with this kit? I don't want to buy yet unless it works.

As of right now, there aren't any really "confirmed" issues with the kit, besides a handful of customers had Control boxes that did not work, and a couple of guys had issues blowing fuses.

The guys who had issues blowing fuses though, had other lighting devices/electronics hooked up as well, which may have been the cause of the fuses blowing.