MACE Ported Intake Manifold Impressions? - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

KMPrenger · 06-11-2012, 06:07 PM

Quote:

Originally Posted by lscamaro

Yea, I know what you mean about the dyno. The only time I'm going to dyno is after all my mods and that will be to get my tune down perfectly

Problem with doing one dyno after its all said and done is you really have no clue how much for gains you've achieved. You may end up with 260 HP and think "what the hell...thats no better than stock" but in reality the baseline might have only been 225 or something like that.

Or you could get 310HP and think "SWEEEET" but its just a high reading dyno.

Sleez...thanks for that info!

Anyways...I hope to hear more impressions!

lscamaro · 06-11-2012, 06:20 PM

Nah, I didn't mean it like that. I don't care about the numbers. They are just numbers to me. The only reason id get on the dyno would be to fine tune my car on a dyno after all my mods are on. So that i won't have to keep paying for dyno time if i need.to adjust the tune as mods are being added.

KMPrenger · 06-11-2012, 06:26 PM

Quote:

Originally Posted by lscamaro

Nah, I didn't mean it like that. I don't care about the numbers. They are just numbers to me. The only reason id get on the dyno would be to fine tune my car on a dyno after all my mods are on. So that i won't have to keep paying for dyno time if i need.to adjust the tune as mods are being added.

Gotcha

Mach · 06-11-2012, 06:47 PM

Quote:

Originally Posted by lscamaro

Worth it in your opinion?

Totally different car with it. So much powweerrrrrrr.

lscamaro · 06-12-2012, 01:59 AM

Glad you think so! Kind of excited to do it! Sad there is a wait for cores :(

Cyber Gray · 06-12-2012, 02:59 AM

I ordered the full house (Ported IM, 25mm insulator, and plenum Spacer). Jay will do the port matching, installation, black painting, and send the complete setup to me in around 3 weeks. Finger crossed.

I will be pleased to hear the impressions from members who actually have this setup already !!

I hope that it doesnt look like a pyramid under the hood !

GoPaul · 06-12-2012, 11:14 AM

Quote:

Originally Posted by Cyber Gray

I ordered the full house (Ported IM, 25mm insulator, and plenum Spacer). Jay will do the port matching, installation, black painting, and send the complete setup to me in around 3 weeks. Finger crossed.

I will be pleased to hear the impressions from members who actually have this setup already !!

I hope that it doesnt look like a pyramid under the hood !

sounds like the same package I ordered also - right down to the paint job

MACE_ENG · 06-12-2012, 02:53 PM

Thanks guys keep those reviews coming!

One thing I notice alot is that most guys who purchased are readers and not posters. Come in guys, participate

As some of you guys might already know this will be my last week taking porting orders. It was fun doing it and at the same time gruesomely painful LOL. I think I might of have got arthritis from this on both of my hands LOL! but on a serious note, is time to move on to my new project ;-)

I will still be here and still supporting you guys so if you need me you guys know how t get a hold of me

Just a little heads up. There's a few more review on the actual sale thread.

Thanks guys

Jay@Mace USA Velocityport410@gmail.com

JohnZ · 06-12-2012, 03:15 PM

I will definitley give my review once I get mine.

Untouchable Keeve · 06-12-2012, 03:19 PM

Quote:

Originally Posted by MACE_ENG

Thanks guys keep those reviews coming!

One thing I notice alot is that most guys who purchased are readers and not posters. Come in guys, participate

As some of you guys might already know this will be my last week taking porting orders. It was fun doing it and at the same time gruesomely painful LOL. I think I might of have got arthritis from this on both of my hands LOL! but on a serious note, is time to move on to my new project ;-)

I will still be here and still supporting you guys so if you need me you guys know how t get a hold of me

Just a little heads up. There's a few more review on the actual sale thread.

Thanks guys

Jay@Mace USA Velocityport410@gmail.com

So if you're not porting them anymore, does Mace have any plans to keep this going at all?

Nytemare · 06-12-2012, 03:41 PM

Quote:

Originally Posted by Untouchable Keeve

So if you're not porting them anymore, does Mace have any plans to keep this going at all?

this..
Was planning on getting mine done but it's going to take me about a month (maybe a little less) before I can spend the money.

camaro2lt · 06-12-2012, 03:47 PM

i have the 25mm and the ported intake and love it!

lscamaro · 06-12-2012, 04:32 PM

How do you feel the car before and after? Anything specific you mind telling us?

KMPrenger · 06-12-2012, 07:40 PM

We want driving impressions...not just "I love it!" lol

06-11-2012, 06:20 PM	#16
lscamaro Drives: 2011 CGM Camaro LS A6 Join Date: Jan 2011 Location: San Antonio, Texas Posts: 10,305	Nah, I didn't mean it like that. I don't care about the numbers. They are just numbers to me. The only reason id get on the dyno would be to fine tune my car on a dyno after all my mods are on. So that i won't have to keep paying for dyno time if i need.to adjust the tune as mods are being added. __________________ Click Picture for Build Thread

06-12-2012, 01:59 AM	#19
lscamaro Drives: 2011 CGM Camaro LS A6 Join Date: Jan 2011 Location: San Antonio, Texas Posts: 10,305	Glad you think so! Kind of excited to do it! Sad there is a wait for cores :( __________________ Click Picture for Build Thread

06-12-2012, 02:59 AM	#20
Cyber Gray Wind Rider Drives: ZL1 19 White; Jeep 5.7 GC 15 Join Date: Jan 2010 Location: Muscat Posts: 2,059	I ordered the full house (Ported IM, 25mm insulator, and plenum Spacer). Jay will do the port matching, installation, black painting, and send the complete setup to me in around 3 weeks. Finger crossed. I will be pleased to hear the impressions from members who actually have this setup already !! I hope that it doesnt look like a pyramid under the hood ! __________________ Im not Gray any more !!

06-12-2012, 03:15 PM	#23
JohnZ Drives: 2010 Camaro 2LT V6 Join Date: Jul 2009 Location: California Posts: 439	I will definitley give my review once I get mine. __________________ Injen CAI, V-Max Throttle Body, Rx 25mm Iceolator, Rx 10mm Plenum Spacer, Mace Ported Manifold, ARK N-II Catback, Trifecta Tune, Rx Catch Can. BMR Bushing Inserts,Pedders Radius Rod Inserts, Pfadt Sway Bars and Endlinks, LSR Front Subframe Brace SS Brembo Brakes, Racing Brake Stainless Lines

06-12-2012, 03:47 PM	#26
camaro2lt Drives: 2010 Camaro 2LT VR/RS CGM Rally's Join Date: May 2009 Location: Palmyra, PA Posts: 5,675	i have the 25mm and the ported intake and love it! __________________ Email: rdurso1@yahoo.com

06-12-2012, 02:53 PM	#22
MACE_ENG Drives: LLT Machine Join Date: Nov 2011 Location: VIC/AUS Posts: 563	Thanks guys keep those reviews coming! One thing I notice alot is that most guys who purchased are readers and not posters. Come in guys, participate As some of you guys might already know this will be my last week taking porting orders. It was fun doing it and at the same time gruesomely painful LOL. I think I might of have got arthritis from this on both of my hands LOL! but on a serious note, is time to move on to my new project ;-) I will still be here and still supporting you guys so if you need me you guys know how t get a hold of me Just a little heads up. There's a few more review on the actual sale thread. Thanks guys Jay@Mace USA Velocityport410@gmail.com

06-12-2012, 04:32 PM	#27
lscamaro Drives: 2011 CGM Camaro LS A6 Join Date: Jan 2011 Location: San Antonio, Texas Posts: 10,305	How do you feel the car before and after? Anything specific you mind telling us? __________________ Click Picture for Build Thread

06-12-2012, 07:40 PM	#28
KMPrenger Drives: 16 Camaro SS, 15 Colorado Join Date: May 2009 Location: Jefferson City, Missouri Posts: 13,969	We want driving impressions...not just "I love it!" lol __________________ 2016 Camaro 1SS - 8-speed - NPP - Black bowties 2010 Camaro 1LT V6 (Sold. I will miss her!)