Got some OBX headers installed and a tune!! 422/414 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Muscle SS · 07-22-2012, 04:36 PM

Went down to the guys at Twisted Synergy in Rennselear outside of Albany, NY.
Already had a CAI intake and MBRP on, did a couple runs with that set up, they put on the OBX headers and high flow cats on and tuned her up, got me running with 422 rwhp and 414 tq.
Said the OBX headers fit like a dream, and the setup sounds amazing

Bo White · 07-22-2012, 04:42 PM

Nice! My GXP made 384hp with a Rotofab and ported TB, looking forward to headers and a tune.

TRIPWIRE · 07-22-2012, 05:45 PM

love my obx!

Avenging Orange · 07-22-2012, 06:02 PM

Well done!
Whether or not they are Kooks knock offs or cheap Chinese steel.........they were the easiest header I've had the pleasure of installing.

Run4two · 07-22-2012, 06:28 PM

Did you all get them through e-bay?

Denis · 07-22-2012, 08:16 PM

I gotta check these things out. I just don't have the case for cooks or the like. These might be a good alternative.

Muscle SS · 07-22-2012, 08:37 PM

Quote:

Originally Posted by Run4two

Did you all get them through e-bay?

I got then thru eBay, but there is a sponsor on here that sells them as well

ss/rs-matt · 07-23-2012, 12:40 AM

Awesome! OBX makes some really high quality headers for the money. I did a write on mine awhile back....they are still holding up great!

http://www.camaro5.com/forums/showthread.php?t=194114

1sweet11SS · 07-23-2012, 05:19 PM

Be careful, from experience, I've had several issues with my OBX......

Great price

Fit like a glove

Great results

Other than that, they're "OK"..... I guess

Iwantone2 · 07-23-2012, 05:44 PM

Quote:

Originally Posted by 1sweet11SS

Be careful, from experience, I've had several issues with my OBX......

Great price

Fit like a glove

Great results

Other than that, they're "OK"..... I guess

I've read about the same issues with OBX

lynxone · 07-23-2012, 06:14 PM

Would these fit on a 2012 ls3 coupe?

ss/rs-matt · 07-23-2012, 07:11 PM

Quote:

Originally Posted by Iwantone2

I've read about the same issues with OBX

ooohhhh right, I've had "issues" too. Not overpriced, perform great, made of beautifully polished 14 gauge 304 stainless, thick flanges with zero leaks, high quality welds with smoothed ports...just a few things you'll have to "deal" with.

Inferno Orange 2SS-RS · 07-23-2012, 07:15 PM

Wow thought I was the only one having these issues.

Quote:

Originally Posted by 1sweet11SS

Be careful, from experience, I've had several issues with my OBX......

Great price

Fit like a glove

Great results

Other than that, they're "OK"..... I guess

Run4two · 07-23-2012, 08:31 PM

God, I can't wait to have these issues!

07-22-2012, 04:36 PM	#1
Muscle SS All blackkk Drives: 2010 2SS/RS LS3 Join Date: Oct 2011 Location: Albany, NY Posts: 871	Got some OBX headers installed and a tune!! 422/414 Went down to the guys at Twisted Synergy in Rennselear outside of Albany, NY. Already had a CAI intake and MBRP on, did a couple runs with that set up, they put on the OBX headers and high flow cats on and tuned her up, got me running with 422 rwhp and 414 tq. Said the OBX headers fit like a dream, and the setup sounds amazing Attached Images __________________ Drivin it like I stole it.

07-22-2012, 04:42 PM	#2
Bo White Drives: 2015 Summit White 2SS 1LE Join Date: Feb 2012 Location: Vance Alabama Posts: 8,090	Nice! My GXP made 384hp with a Rotofab and ported TB, looking forward to headers and a tune. __________________ Retired wanna be cylinder head porter 2015 2SS 1LE Clutch reservoir, Vararam DRX, ported TB, TSP 2" headers, MGW shifter, stage 4 cam and Wilkes 11° 65cc heads Totalled: 2010 1SS Wilkes Performance/Eagle 416 shortblock, TSP custom valvetrain, PRC 260 heads, Edelbrock Pro Flo 102, th400 swap, 8" PTC 5500 stall= 535/435 at the wheels tuned Gen 3 Performance and Dyno 10.97 @ 124 full weight in 3100 DA CamaroFest X

07-22-2012, 06:02 PM	#4
Avenging Orange Drives: 2010 Inferno Orange 2SS/RS Join Date: Apr 2010 Location: Clermont, IN Posts: 3,297	Well done! Whether or not they are Kooks knock offs or cheap Chinese steel.........they were the easiest header I've had the pleasure of installing. __________________ 2010 Inferno Orange 2SS/RS M6 Black Leather, Sun Roof, OBX Headers, Borla touring axle back, Cold Air Inductions CAI , non synthetic fluids, BMR total bushing upgrade/1" lowering springs, DSE 32mm rear sway bar. GM fe4 shocks/struts/LCA's, AAM 3.91 diff, Vertini RFS1.8 20x9 +30. Conti ExtremeContact Sport 275/35/20. sjm autoprod ABL dash kit. Mike Norris tuned 413/419. Avenging Orange: 43 years of not buying into the Hype........and damn proud of it!! https://youtu.be/9JD9it6SmB8 https://youtu.be/xmelTlEzI34 KICKING CANCERS ASS SINCE 2015!!

07-22-2012, 08:16 PM	#6
Denis Drives: 2010 SS Join Date: May 2012 Location: Yorktown Heights, NY Posts: 7,695 View My Garage	I gotta check these things out. I just don't have the case for cooks or the like. These might be a good alternative. __________________

07-23-2012, 12:40 AM	#8
ss/rs-matt Drives: 2015 ZL1 Join Date: Aug 2011 Location: California Posts: 1,731	Awesome! OBX makes some really high quality headers for the money. I did a write on mine awhile back....they are still holding up great! http://www.camaro5.com/forums/showthread.php?t=194114 __________________ "Want to know whats cooler than your murdered out Honda Civic? ...Any Audi." Daniel Tosh

07-22-2012, 05:45 PM	#3
TRIPWIRE Chillin Like a Villain Drives: 2013 2SS Blue Ray Metallic Dusk Ed. Join Date: Apr 2011 Location: Clarksburg,MD Posts: 551 View My Garage	love my obx!

07-22-2012, 06:28 PM	#5
Run4two Drives: 2012 Camaro 2SS Transformer Edition Join Date: Sep 2011 Location: Temecula, Ca Posts: 451	Did you all get them through e-bay?

07-23-2012, 05:19 PM	#9
1sweet11SS Drives: 2011 2SS/RS Camaro Join Date: Feb 2011 Location: So Cal Posts: 284	Be careful, from experience, I've had several issues with my OBX...... Great price Fit like a glove Great results Other than that, they're "OK"..... I guess

07-23-2012, 06:14 PM	#11
lynxone Drives: 2012 2ss 45th anniversary edition Join Date: Jun 2012 Location: Denver Posts: 212 View My Garage	Would these fit on a 2012 ls3 coupe?

07-23-2012, 08:31 PM	#14
Run4two Drives: 2012 Camaro 2SS Transformer Edition Join Date: Sep 2011 Location: Temecula, Ca Posts: 451	God, I can't wait to have these issues!