Garage Porn! Post your pics - Page 8 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

bigd1276 · 11-21-2013, 05:04 PM

My little sanctuary.

bigd1276 · 11-21-2013, 05:05 PM

and another

Nick S · 11-21-2013, 08:43 PM

Quote:

Originally Posted by bigd1276

My little sanctuary.

Wow. I really like the wall décor. Can never have enough Camaro signs and posters!! The garage looks like a pretty nice "sanctuary" too!

PfadtRacing · 11-22-2013, 02:51 PM

Alright, this is the project that made me want to start this thread. Here is a 3/4 finished workshop that will be housed in my garage. It looks like crap compared to most of y'all's but there is a lot of room for improvement! I just hope I can get it taped & painted before it gets below freezing every day. -Kerry@Pfadt

RubyCamaro · 11-22-2013, 08:23 PM

EarlyApex · 11-23-2013, 01:34 PM

Quote:

Originally Posted by Nick S

Wow. I wish I had some of the floors that you guys have. I didn't have enough money to do the floor when we put our addition onto our house. So for now my floor is bare concrete...but I can't complain too much about having a 50x50 with 12ft-6" minimum ceiling height. Here are a few pics I took recently. Some are older pics but as most garages they are always a work in progress.

Can I get some more info on the challenger lift? Which model is that? What's your ceiling height?

Dr. Evil · 11-24-2013, 12:00 PM

I'll play.
Mine is no where near as neat, clean and nice as others but its mine. 28' x 32' with 15' ceilings on the left bay where the lift is and a bonus 12' x 18' room upstairs for whatever. I built this back in 2009 myself and still need to finish a lot of things. Its slowly coming together though.

I put some garage floor paint down on this side to see how well it works. So far so good. I'd like to epoxy the floors but its a working garage and all I need for it to do is make for easier cleanup and keep dust down. For that it works fine.

Its a bit tight on the left to walk around the lift but I manage. I wanted all my space on the right side and front/back. The CGM 2011 has since been replaced by a Black 2013 too.

Current picture of the upstairs. I need to finish this room.

There are no words to describe how much better it is to work on a vehicle if you have your own lift. I cant stress how much better you will enjoy it if when you build a garage plan for one. I know of no one that has regretted getting one. They are not as expensive and hard to install as you might think.

Nick S · 11-24-2013, 01:14 PM

Quote:

Originally Posted by EarlyApex

Can I get some more info on the challenger lift? Which model is that? What's your ceiling height?

My challenger lift is their CL10V3 model. Which is a beefier version of their E10 model but the CL10V3 is made in the USA. It's a 10,000 lb rated lift (which most are as a minimum these days). The V3 means that is has the Versymmetric lifting option with 3 stage front arms. The versymmetric lifting option means that the arms are designed to accommodate either symmetric lifting where the vehicle wheel base is centered on the lift front to rear or I can lift asymmetrically which is where more of the car hangs off the rear of the lift than the front of the lift. This is handy because with a two door car you don't have to pull all the way thru the lift so you can still get your door open. But if you lift something larger like a pick-up truck then you can use the symmetric lifting to help keep the vehicle balanced better. The 3 stage front arms means that the arm is 3 separate box tube pieces that telescope in and out of each other so you get more extension length out of the front arms.

My ceiling height is minimum 12ft-6in and greater in some places due to the slope of the floor for my floor drains. The lift I have requires a minimum of 12 ft ceilings for clearance.

Depending on your installer and price you can get it will likely run you somewhere around $5,000 for the lift. But as others have said it will be the best $5,000 you have ever spent on your cars if you like to work on them and maintain them yourself. Makes everything easier. Even waxing the car is much easier because I can just lift it up to eye level when waxing the lower doors and rockers (see pics below).

SSmoothie · 11-24-2013, 03:23 PM

Mines a work in progress.

CarNut · 11-24-2013, 07:32 PM

my backyard garage...

view from house...

upstairs, highly recommended option!

office area...

far left bay, wash-paint-etc

Nick S · 11-24-2013, 08:12 PM

Quote:

Originally Posted by CarNut

my backyard garage...

view from house...

upstairs, highly recommended option!

office area...

far left bay, wash-paint-etc

I really like your Texaco theme!! Nice garage/shop! That first pic showing the outside looking like an old service station is really neat!! Your shop theme has me

and thinking of all kinds of neat things I'd like to do with my shop.

Thanks for posting!!

GroundPilot · 11-25-2013, 08:21 AM

Damn nice garage CarNut! You are about 15 minutes from me. If you ever do an "open house" let me know, would love to see it in person.

Normagene · 11-25-2013, 09:23 AM

Quote:

Originally Posted by CarNut

my backyard garage...

view from house...

upstairs, highly recommended option!

office area...

far left bay, wash-paint-etc

Great job, you must love spending time with your cars, and what a perfect place to do so!

Sent from my iPad using Tapatalk

PfadtRacing · 11-25-2013, 02:53 PM

This is one of my favorite threads to check each week. I had no idea there could be so many cool variations of garages!

11-21-2013, 05:04 PM	#99
bigd1276 2017 HyperBlue 2SS Drives: 2017 HyperBlue Camaro 2SS Join Date: Jan 2009 Location: PA Posts: 2,202 View My Garage	My little sanctuary. Attached Images __________________ ] http://www.camaro5.com/forums/showthread.php?t=30755 2010 IBM 2LT RS......Traded for..... 2012 IBM 2SS RS......Traded for..... 2017 HBM 2SS

11-21-2013, 05:05 PM	#100
bigd1276 2017 HyperBlue 2SS Drives: 2017 HyperBlue Camaro 2SS Join Date: Jan 2009 Location: PA Posts: 2,202 View My Garage	and another Attached Images __________________ ] http://www.camaro5.com/forums/showthread.php?t=30755 2010 IBM 2LT RS......Traded for..... 2012 IBM 2SS RS......Traded for..... 2017 HBM 2SS

11-22-2013, 02:51 PM	#102
PfadtRacing Drives: 2010 Camaro, 2006 Z06 Join Date: Feb 2009 Location: SLC, UT Posts: 3,370	Alright, this is the project that made me want to start this thread. Here is a 3/4 finished workshop that will be housed in my garage. It looks like crap compared to most of y'all's but there is a lot of room for improvement! I just hope I can get it taped & painted before it gets below freezing every day. -Kerry@Pfadt Last edited by PfadtRacing; 11-22-2013 at 02:52 PM. Reason: typo

11-22-2013, 08:23 PM	#103
RubyCamaro Jan Drives: 2010 Camaro 1LT Red Jewel tintcoat Join Date: May 2010 Location: Springfield, TN Posts: 16,241 View My Garage	__________________

11-24-2013, 12:00 PM	#105
Dr. Evil Drives: 2013 SS Join Date: May 2011 Location: Tennessee Posts: 350	I'll play. Mine is no where near as neat, clean and nice as others but its mine. 28' x 32' with 15' ceilings on the left bay where the lift is and a bonus 12' x 18' room upstairs for whatever. I built this back in 2009 myself and still need to finish a lot of things. Its slowly coming together though. I put some garage floor paint down on this side to see how well it works. So far so good. I'd like to epoxy the floors but its a working garage and all I need for it to do is make for easier cleanup and keep dust down. For that it works fine. Its a bit tight on the left to walk around the lift but I manage. I wanted all my space on the right side and front/back. The CGM 2011 has since been replaced by a Black 2013 too. Current picture of the upstairs. I need to finish this room. There are no words to describe how much better it is to work on a vehicle if you have your own lift. I cant stress how much better you will enjoy it if when you build a garage plan for one. I know of no one that has regretted getting one. They are not as expensive and hard to install as you might think. __________________ 2013 model 2SS LS3 1969 model wife. Factory stock, no mods. Redhead package. 2005 model son. Special ordered with the hell on wheels package.

11-24-2013, 03:23 PM	#107
SSmoothie Drives: 2010 Camaro 2SS/RS 6SP Blk/Blk Join Date: Aug 2009 Location: WA Posts: 920 View My Garage	Mines a work in progress. __________________

11-24-2013, 07:32 PM	#108
CarNut Drives: everyone crazy Join Date: Aug 2009 Location: N.E. GA Posts: 13 View My Garage	my backyard garage... view from house... upstairs, highly recommended option! office area... far left bay, wash-paint-etc __________________ ~Carnut

11-25-2013, 08:21 AM	#110
GroundPilot Drives: 2012 Camaro 2SS/RS "Bridgette" Join Date: Jul 2013 Location: Altanta, GA Posts: 267	Damn nice garage CarNut! You are about 15 minutes from me. If you ever do an "open house" let me know, would love to see it in person. __________________ CAI intake, Magnaflow catback, Hotchkis 1" Sport drop springs, AAC LED Sidemarkers, Range AFM disabler

11-25-2013, 02:53 PM	#112
PfadtRacing Drives: 2010 Camaro, 2006 Z06 Join Date: Feb 2009 Location: SLC, UT Posts: 3,370	This is one of my favorite threads to check each week. I had no idea there could be so many cool variations of garages!