i found something interesting ...

[bnorman]

Quoted from the email I received last night from Lim

"kok hing Lim
2:11 AM (18 hours ago)

to me
What mean? Bt for phone is ok use the icon bt and if bt for obd2. Not yet"

[johandepuydt]

Shipment to Belgium is 250 USD...

[Yippee38]

Originally Posted by johandepuydt

Shipment to Belgium is 250 USD...

Yeah. That sounds about right.

For me, the microphone thing is a big deal. I carry my phone in my pants pocket and I don't want to take it out to make a call when I'm in the car. I'm sure the microphone would be horribly muffled if I made a call that way.

I'm going to open it up and see if there are microphone connectors on the board. I hope there are.

[BooSSted]

Too bad the OBD doesn't work; I'd prolly buy one of the double din units.

[johandepuydt]

I was curious if there are differences between US and European versions.
So I popped out the head unit to see the wiring.
Except for the antenna there only is one connection to the unit, as in the picture. Is that any different than yours guys?
It's the Boston Acoustics model by the way.

[johandepuydt]

This is wat I ordered and paid for today


E-mailed the WU paper to Lim but he has not responded yet.....

[19car69]

Originally Posted by johandepuydt

I was curious if there are differences between US and European versions.
So I popped out the head unit to see the wiring.
Except for the antenna there only is one connection to the unit, as in the picture. Is that any different than yours guys?
It's the Boston Acoustics model by the way.

That looks completely different than mine.

[johandepuydt]

Originally Posted by 19car69

That looks completely different than mine.

If that really is the case I'm in trouble.....

[spadz93]

any update on the bugs being fixed?

[19car69]

Originally Posted by johandepuydt

If that really is the case I'm in trouble.....

I wouldn't jump to that conclusion yet. Mine had multiple harnesses and if they were all together they may look like that.

[johandepuydt]

Originally Posted by 19car69

I wouldn't jump to that conclusion yet. Mine had multiple harnesses and if they were all together they may look like that.

LIM->.unit can send if no others issues after qa check
On 11 Apr 2014 14:05, "Johan Depuydt" <johandepuydt@medisan.be> wrote:
Hi Lim,

Did you receive payment for Camaro system, shipment to Belgium?
BUT you have to be aware if the type of connection in my car is the same as in US.
I already send you a picture of this but I included it again in this e-mail.
You have to be certain that it will fit???

Kind regards,

[layzurguy]

Originally Posted by johandepuydt

LIM->.unit can send if no others issues after qa check
On 11 Apr 2014 14:05, "Johan Depuydt" <johandepuydt@medisan.be> wrote:
Hi Lim,

Did you receive payment for Camaro system, shipment to Belgium?
BUT you have to be aware if the type of connection in my car is the same as in US.
I already send you a picture of this but I included it again in this e-mail.
You have to be certain that it will fit???

Kind regards,

Just think, you'll bea able to look up how tall the Atomium is while driving under it to go get French fries with mayo, and continue on to chez Leon for mussels.

[bnorman]

Originally Posted by Yippee38

I don't know if any of you guys follow xda-developers, but there's been a few discussions over there about the AN-21U, android head unit. Apparently, this unit we've been discussing in an AN-21U in a fancy faceplate. And while that seems like just "nice to know" information, it is more than that. It's more because some of the people over on xda-developers are modding their units. In fact, they've figured out how to hard-wire an external microphone to their units.
http://forum.xda-developers.com/show...4&postcount=46

I don't know if that would work for these units, but maybe it would. Somebody would have to take theirs apart to get to the board in the device and look for those two mic connectors on the board, then connect a mic to test it. IMO, the next step would be to wire that to the in-car, Onstar mic.

I look through that entire thread, I am not at all comfortable with soldering onto the board. And as it was stated on the that thread, even if one could solder a new external microphone on the board the other (if there is another) would still be active and cause problems.

What would be optimum is a way to connect the existing Onstar Mic to this unit. If that wouldnt work, then to find the external mic (again, if there is one) and cut those wires, splice in a better quality mic and install it in a better location. That I am not afraid of, but going in an messing around with board, etc I cant do. Maybe someone on here has expertise on that, and with a good write up others could follow.

First things first, I would really like to see a fix to this OBD/WiFi problem.

[bnorman]

Originally Posted by 19car69

I figured out the Web Cam. Now I just need to come up with a good way to mount the camera.

You can load any apps that the play store has. Can't comment on how well all will work though.

So what did you do to get the Web Cam to work? In the old system there was an app, but in the upgrade it seems to have disappeared. I tried a few apps from Google Play but they are not recognizing the camera.

Thanks