08-11-2014, 11:05 AM | #1 |
Drives: 2014 1LS 6-speed manaul Join Date: Jun 2014
Location: Mokena IL
Posts: 6
|
Cold air intake problem
I just put a spectra cold air intake on my 2014 v6 camaro. It is a 6 speed manual and everytime i go to shit and i push the clutch in and let off the gas the car revs up. It just started doing this when i put the intake on. It is not the way that im shifting because it shifted normally before i put it on and i know how to drive stick both of my cars are stick. What can i do to make this stop without taking the intake off and putting the stock one back on? Thanks everyone.
|
08-11-2014, 11:28 AM | #2 |
Drives: 2014 1LS 6-speed manaul Join Date: Jun 2014
Location: Mokena IL
Posts: 6
|
Okay ill go try that right now thanks!
|
08-11-2014, 03:33 PM | #3 | |
Red Brick of Vengeance!
Drives: 12 Second Brick Join Date: Jun 2009
Location: at my pulpit
Posts: 7,745
|
Quote:
__________________
|
|
08-11-2014, 09:56 PM | #4 |
Drives: 2014 1LS 6-speed manaul Join Date: Jun 2014
Location: Mokena IL
Posts: 6
|
So i unplugged the battery for over an hour and still doing the same thing i will try the fuze idea tomorrow after work but if that doesnt work then what are my options?
|
08-12-2014, 04:07 AM | #5 |
Drives: 2011 1LS Join Date: Aug 2014
Location: STL
Posts: 13
|
Yea, I had completely given up on mine and already had a return authorization to send it back, then I took another look at it and realized I had the MAF sensor closer to the TB instead of the filter, duh .
From all the research I did while trying to troubleshoot mine, the 5 & 20 fuse pull and/or battery disconnect for several hours seemed to fix most of those issues, good luck! |
08-13-2014, 03:02 AM | #6 |
Drives: 2011 1LS Join Date: Aug 2014
Location: STL
Posts: 13
|
lol, that's awesome. Good guy, sad he's gone.
|
08-13-2014, 02:25 PM | #7 |
Drives: 2014 1LS 6-speed manaul Join Date: Jun 2014
Location: Mokena IL
Posts: 6
|
Which fuze box are you talking about pulling 5 and 20 from and how do i get to it?
|
|
|
Thread Tools | |
|
|