Project 1LFXE is almost complete..... - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

crc91 · 10-29-2014, 03:12 AM

Quote:

Originally Posted by KaBoom1701

Funny you should bring that up...I just ordered that today. lol

About $55 from the dealer.

If you don't mind could you pm me how much this all set you back? Very interested in getting this done

KaBoom1701 · 10-29-2014, 10:56 AM

No need for a PM. I'll just post here so everyone can use for reference.

SCOOP Part # 22828242 $87.96 (comes painted black already
DEFLECTOR Part # 23180572 $45.35
14' Hood Liner Part # (pending) $55.00
Bolts and Alum pieces....around $50 total.

I also bough some metal cutting wheels for cut off tool I used.

I did buy a baffle piece that goes on top of the radiator but it ended up being the wrong part. I'll have to see if I can find the correct ZL1 part # and try again.

dmginc · 10-29-2014, 10:59 AM

i like the hood vent but would have to lose my dragon to do this...i like my dragon...

Rock It · 10-29-2014, 11:34 AM

Very Nice ! sounds like a good side business... lol...

LBJ · 10-29-2014, 07:44 PM

Very nice

911medic · 10-29-2014, 09:48 PM

Quote:

Originally Posted by LBJ

Very nice

LBJ you're killin' me with that SIM and the heat extractor!!

That looks awesome, and now I want one...bad.

crc91 · 10-29-2014, 10:15 PM

Quote:

Originally Posted by KaBoom1701

No need for a PM. I'll just post here so everyone can use for reference.

SCOOP Part # 22828242 $87.96 (comes painted black already
DEFLECTOR Part # 23180572 $45.35
14' Hood Liner Part # (pending) $55.00
Bolts and Alum pieces....around $50 total.

I also bough some metal cutting wheels for cut off tool I used.

I did buy a baffle piece that goes on top of the radiator but it ended up being the wrong part. I'll have to see if I can find the correct ZL1 part # and try again.

Thanks man I'm really interested on doing this to my 14 v6! Where did you get those parts for that price if you don't mind me asking. Everywhere I've seen it is 150-250. It comes painted black? Matte or gloss?

JantzenOKC · 10-29-2014, 10:24 PM

I think this looks alot better than the hex vents. And cheaper too. This might have to be my next mod. So it comes painted black, is it glossy, or like a semi gloss, or matte? Kind of looks semi in the pics.

KaBoom1701 · 10-30-2014, 09:23 AM

PM send on where I bought the parts.

The vent comes in semi-gloss black

LBJ · 10-30-2014, 10:29 AM

Thank you. .911medic

crc91 · 10-30-2014, 01:24 PM

Hey kaboom is the 14 hood liner needed? Also what size aluminum pieces and bolts did you get?

Jason@JacFab · 10-30-2014, 01:53 PM

The scoop/vent part for around $100 comes in a satin/semi-gloss black color... You can also get them pre-painted in available 2014 factory colors straight from GM, but they are $250-300+ for the painted ones depending on where you look.

23176239 - Ashen Gray
23176238 - Black (I think this one is gloss black, but not 100% certain)
23176242 - Blue Ray
23176244 - Bright Yellow
23176245 - Crystal Red
23176243 - Red Hot
23176246 - Red Rock Metallic
23176240 - Silver Ice
23176241 - Summit White

I've seen pictures of plenty of people that have used their 10-13 hood liner, and just cut a hole in it... Problem is that the vent is kind of right in the middle of the Chevy bowtie.

rgrmoreira13 · 10-30-2014, 02:58 PM

I would hate to cut a hole in my hood for that. But it really looks amazing.

crc91 · 10-30-2014, 03:13 PM

I think it's worth it besides it looks pretty damn close to an oem finish to me

10-29-2014, 10:56 AM	#16
KaBoom1701 KaBoom1701 Drives: 13' ZL1 Red M6 Join Date: Dec 2012 Location: I.E. SoCal (Yucaipa) Posts: 8,631	No need for a PM. I'll just post here so everyone can use for reference. SCOOP Part # 22828242 $87.96 (comes painted black already DEFLECTOR Part # 23180572 $45.35 14' Hood Liner Part # (pending) $55.00 Bolts and Alum pieces....around $50 total. I also bough some metal cutting wheels for cut off tool I used. I did buy a baffle piece that goes on top of the radiator but it ended up being the wrong part. I'll have to see if I can find the correct ZL1 part # and try again. __________________ Mods: Roto-Fab Intake, WW Res. kit & Big Gulp Air Scoop, Elite Catch Can, ATI Super Damper & 18% OD Pulley, LF Idler pulley bracket, Metco CC breather, ID850 Injectors, Stainless Power Headers w/ ceramic coating, TR71X Spark Plugs, JMS Fuel Pump Booster, Bo White TB, Tuned by Ted @ Jannetty Racing, Ron Davis HX, D3 Reservoir, Pfadt 1" Springs, Moreno Camber Plates, ZL1 Addons Splitter guard washers, Tow Hook kit & rock guards, Hurst Shifter Billet Plus 6 Speed Short Shifter, ZL1 DRL lighting harness, ZL1 Recaro Seats.

10-29-2014, 10:59 AM	#17
dmginc Drives: In Circles Join Date: Mar 2011 Location: South Carolina Posts: 3,433 View My Garage	i like the hood vent but would have to lose my dragon to do this...i like my dragon... __________________ CAI Cold Air Intake, BMR Strut Tower Brace, BMR 1.2" Lowering Springs Gen5DIY Fog Lights, Big Worm Third Brake Light/Side Marker Tint (Charcoal) GTS Tail Light Covers, Purple Under Hood Lighting Magnaflow Resonated X-Pipe w/ Muffler Delete Black Plasti Dipped Wheels, Z/28 Spoiler

10-29-2014, 11:34 AM	#18
Rock It Drives: '12 2LT/RS Join Date: Apr 2014 Location: littleton colorado Posts: 66	Very Nice ! sounds like a good side business... lol... __________________ Mods- "Bo" ported T/B, Apex catch can, Apex scoop and W/W, K&N CAI, Magnaflow axel back, Big Worm vinyl graphics, Vitesse T/C

10-29-2014, 07:44 PM	#19
LBJ Drives: 2012 camaro 1LS. M6 Join Date: Sep 2012 Location: Lithopolis OHIO Posts: 512	Very nice __________________ Mods..mrt v2. Cai intake v max throttle body. 20% windo tint & RX catch can Gianna 20in rims nitto 555 & afterburner tail lights RS halo head lights & gm heat extractor 4 pack gauges & panted heritage Grille & zl1rear sproler t5 splitter custom head rest

10-30-2014, 09:23 AM	#23
KaBoom1701 KaBoom1701 Drives: 13' ZL1 Red M6 Join Date: Dec 2012 Location: I.E. SoCal (Yucaipa) Posts: 8,631	PM send on where I bought the parts. The vent comes in semi-gloss black __________________ Mods: Roto-Fab Intake, WW Res. kit & Big Gulp Air Scoop, Elite Catch Can, ATI Super Damper & 18% OD Pulley, LF Idler pulley bracket, Metco CC breather, ID850 Injectors, Stainless Power Headers w/ ceramic coating, TR71X Spark Plugs, JMS Fuel Pump Booster, Bo White TB, Tuned by Ted @ Jannetty Racing, Ron Davis HX, D3 Reservoir, Pfadt 1" Springs, Moreno Camber Plates, ZL1 Addons Splitter guard washers, Tow Hook kit & rock guards, Hurst Shifter Billet Plus 6 Speed Short Shifter, ZL1 DRL lighting harness, ZL1 Recaro Seats.

10-29-2014, 10:24 PM	#22
JantzenOKC Drives: '13 2LT/RS Twin Turbo Join Date: Aug 2012 Location: Edmond, Oklahoma Posts: 3,073	I think this looks alot better than the hex vents. And cheaper too. This might have to be my next mod. So it comes painted black, is it glossy, or like a semi gloss, or matte? Kind of looks semi in the pics.

10-30-2014, 10:29 AM	#24
LBJ Drives: 2012 camaro 1LS. M6 Join Date: Sep 2012 Location: Lithopolis OHIO Posts: 512	Thank you. .911medic __________________ Mods..mrt v2. Cai intake v max throttle body. 20% windo tint & RX catch can Gianna 20in rims nitto 555 & afterburner tail lights RS halo head lights & gm heat extractor 4 pack gauges & panted heritage Grille & zl1rear sproler t5 splitter custom head rest

10-30-2014, 01:24 PM	#25
crc91 Drives: '14 1LS Join Date: Apr 2014 Location: Mandeville Posts: 2,166	Hey kaboom is the 14 hood liner needed? Also what size aluminum pieces and bolts did you get?

10-30-2014, 01:53 PM	#26
Jason@JacFab Drives: 2016 1LT RS Camaro; 72 Chevelle Join Date: Apr 2008 Location: Central Point, OR Posts: 5,685 View My Garage	The scoop/vent part for around $100 comes in a satin/semi-gloss black color... You can also get them pre-painted in available 2014 factory colors straight from GM, but they are $250-300+ for the painted ones depending on where you look. 23176239 - Ashen Gray 23176238 - Black (I think this one is gloss black, but not 100% certain) 23176242 - Blue Ray 23176244 - Bright Yellow 23176245 - Crystal Red 23176243 - Red Hot 23176246 - Red Rock Metallic 23176240 - Silver Ice 23176241 - Summit White I've seen pictures of plenty of people that have used their 10-13 hood liner, and just cut a hole in it... Problem is that the vent is kind of right in the middle of the Chevy bowtie.

10-30-2014, 02:58 PM	#27
rgrmoreira13 Drives: 2015 2SS 1LE Join Date: Apr 2013 Location: Miami WADE County Posts: 1,127 View My Garage	I would hate to cut a hole in my hood for that. But it really looks amazing. __________________ Specs TSP Stage 2 Boosted Cam 227/235 at 114 LSA Fore Innovation Triple pump staged (Walbro 342 primary and 2x Walbro 450 secondaries) Procharger D1x with a 3.85 pulley ID1050x Injectors Flex Fuel Sensor Monster LT1 Twin Disk Clutch Holley Sniper Efi Intake Manifold NW 103mm Boosted TB 747rwhp at 12psi on E85

10-30-2014, 03:13 PM	#28
crc91 Drives: '14 1LS Join Date: Apr 2014 Location: Mandeville Posts: 2,166	I think it's worth it besides it looks pretty damn close to an oem finish to me