11-25-2014, 01:26 PM | #1 |
Drives: 2017 Corvette Join Date: Jul 2011
Location: Texas
Posts: 258
|
FS: Injectors out of 2013 CTS-V
Sold...
Fit: LS3/LS7/L76/L92/L99 LS2 LS1/LS6 Camaro 93-96 (LT1) Camaro 98-01 (LS1) Camaro 10+ (LS3) Camaro ZL1 (LSA) Last edited by Bolt-onC6; 11-26-2014 at 04:18 PM. |
11-25-2014, 06:14 PM | #2 |
Blue Streak
Drives: 2010 SIM 2SS Join Date: Dec 2012
Location: Sherwood Park, Alberta
Posts: 809
|
Sorry for not knowing, but what #'s are these?
__________________
2010 CAMARO 2SS SLP TVS2300 3.4 pulley, 9PSI Custom Tune, ZL1 FP, ADM FPCM, ID 850's, tr7ix plugs, CAI intake, KOOKS 1 7/8 & HFC, Magnaflow Comp catback, Pedders Xa coilovers & sway bars & sub frame bushings Mpd1 Z hood & spoiler, Vertical doors, Hurst short shifter, R1 dimpled/slotted rotors, SS brake lines, Hawk HPS Pads, Niche Apex & Nitto Invo front:20X10-275, rear:20X10.5-315, GM GFX & Satin gas cap, RS projectors, T3 bumper ports, T4 splitter, Alpine INE-W927HD, Metro dash kit
|
11-25-2014, 06:51 PM | #3 |
Drives: 2017 Corvette Join Date: Jul 2011
Location: Texas
Posts: 258
|
56 lbs at 65 psi
|
11-25-2014, 08:06 PM | #4 |
Drives: CGM 2SS/RS Join Date: Jul 2012
Location: Bay Area
Posts: 224
|
Are these the same as the ones that come with a Maggie? I thought they were 52#... compared to these 56#?? Might be a beneficial swap (Maggie with CAI, LTs and tune) ?? And would they fit the tvs2300? Can someone maybe enlighten me
|
11-26-2014, 06:43 AM | #5 |
Drives: 2017 Corvette Join Date: Jul 2011
Location: Texas
Posts: 258
|
I looked on Magnuson's site but all they say is high flow fuel injectors. Might want to give them a call.
http://www.magnacharger.com/p-123-ch...ercharger.aspx |
|
|
Thread Tools | |
|
|