09-19-2014, 08:26 AM | #239 |
Drives: 2013 2ss 1le ashen gray Join Date: Aug 2013
Location: Michigan
Posts: 39
|
Thanks for the video, it was very helpful. I installed my grille last night and cannot over emphasize the necessity of removing the wheel liners and tires. The 15 minutes it takes will save many a knuckle and hour. Honestly,. I do not see how you can really install the grille without taking this action. Once you remove the wheels and liners, you have full access to all the bolts. What took me the most time was disconnecting the wiring harness connector. It did not want to come apart. Make sure you pull the white tab completely out of the connector. Seems counter-intuitive but that is what it took to get mine apart. Total time from unpacking grille to wiping down the install was about 1.3 hours. Post a picture later.
|
09-19-2014, 01:18 PM | #240 | |
Blessed
Drives: 2013 Sonic RS MT Join Date: Dec 2007
Location: Saint Augustine FL
Posts: 28,444
|
Quote:
__________________
Click image to see build thread. PQ - "the love of cars. It's a boys first step toward manhood and a mans last hold on boyhood." Fbodfather - "We do not want to use the Z28 moniker on a car that does not deserve this hallowed name." The_Blur - "Let's not confuse competitors with equals." |
|
01-08-2015, 11:17 PM | #241 |
Drives: 2011 Camaro LS Join Date: Sep 2008
Location: NJ
Posts: 1,917
|
I need to replace my driver side front fender and possibly my bumper and your first video will make taking these pieces off a breeze. Thanks!
|
01-20-2015, 11:38 AM | #242 |
Blessed
Drives: 2013 Sonic RS MT Join Date: Dec 2007
Location: Saint Augustine FL
Posts: 28,444
|
Very welcome.
__________________
Click image to see build thread. PQ - "the love of cars. It's a boys first step toward manhood and a mans last hold on boyhood." Fbodfather - "We do not want to use the Z28 moniker on a car that does not deserve this hallowed name." The_Blur - "Let's not confuse competitors with equals." |
06-10-2015, 08:04 PM | #243 |
In The Circle
Drives: 2010 Camaro 2SSRS IOM M6 Join Date: May 2009
Location: Abbotsford BC Canada
Posts: 11,292
|
THX Bud! Used your DYI again, working on installing ASC splitter.
__________________
|
07-25-2015, 08:06 PM | #244 |
Blessed
Drives: 2013 Sonic RS MT Join Date: Dec 2007
Location: Saint Augustine FL
Posts: 28,444
|
__________________
Click image to see build thread. PQ - "the love of cars. It's a boys first step toward manhood and a mans last hold on boyhood." Fbodfather - "We do not want to use the Z28 moniker on a car that does not deserve this hallowed name." The_Blur - "Let's not confuse competitors with equals." |
03-09-2016, 07:43 PM | #245 |
Started#gottalovethatblue
|
I just finished installing my heritage grill. These two videos are EXCELLENT!!! I had my tablet on the work bench and kept pausing and starting the video to make sure that I was able to go step by step and get everything exactly the way it needed to be. Bravo for two videos very well done!!
__________________
|
12-29-2016, 11:47 AM | #246 |
Drives: 2010 IOM SS/RS L99, Kooks LT, VTC, Join Date: Dec 2016
Location: post falls idaho
Posts: 17
|
So being of a certain age and not running ultra marathons anymore, I am thinking about having either the dealer or their body shop do this exchange. What do you thing would be a expected cost for the labor?
|
01-01-2017, 02:37 AM | #247 |
Drives: Savitar; The 500rwhp N/A Monster! Join Date: Aug 2016
Location: Middletown, Ohio
Posts: 2,914
|
Not to revive an old thread but this is going to come in handy soon and I need to be able to find it later haha
__________________
*SOLD*504HP/433TQ | Night Fury cammed Cold Air Inductions intake Bo White ported TB Speed Engineering 1 7/8 longtubes NPP catback QTP low profile cutouts Powerbond 25% UDP 3.73 gears JRE scoop ZL1 grille R1 Concepts drilled/slotted rotors built/tuned by Weapon X Motorsports
|
01-01-2017, 07:46 AM | #248 | |
Drives: 2011 1SS/RS IBM Camaro Join Date: Jan 2011
Location: Chittenango, NY, USA
Posts: 7,219
|
spike III Build IBM 1SS/RS [COTW] 6/25/12
Quote:
Very good instructions in the DIY thread. I have had my front clip off 6 times. Changed my grill 3 times.
__________________
|
|
03-14-2017, 10:35 AM | #249 |
Account Suspended
Drives: 2013 1LE Join Date: Jan 2013
Location: Mass
Posts: 162
|
saved it!
|
12-26-2018, 10:19 AM | #250 |
Drives: 2013 Hot Wheels 2SS Join Date: Jul 2015
Location: Golden Driller
Posts: 33
|
Should have saved it because now the Video's are gone....
__________________
2013 Hot Wheels 2SS
2006 Torred Daytona #1988 2002 Trans Am WS6 A4 1980 Z/28 388/2004 R 1971 Firebird project |
12-26-2018, 10:48 AM | #251 |
Drives: 2011 1SS/RS IBM Camaro Join Date: Jan 2011
Location: Chittenango, NY, USA
Posts: 7,219
|
Spike III Build 2011 IBM 1SS/RS [COTW 6/25/12]
Go to the DIY"S Thread.
Click on the second sticky. List of Camaro DIY"S The Stig. Scroll down the list to the Exterior List. There is a line that is titled, DIY Heritage Grill Install remove & reinstall Front Bumper /Fascia. It has to videos each one 15 minutes and they work. I used it 5 years ago. and have done it 5 times since. Good Luck. Try these. https://youtu.be/dUDbi2gEo1Q https://youtu.be/1a5GSQbhnbO I just tried these and they won't work. But if you follow the directions I posted above it will show the 2 seperate 15 min. videos.
__________________
Last edited by BLU DUCE; 12-26-2018 at 01:19 PM. |
12-26-2018, 05:35 PM | #252 | |
Drives: 2013 Hot Wheels 2SS Join Date: Jul 2015
Location: Golden Driller
Posts: 33
|
Quote:
__________________
2013 Hot Wheels 2SS
2006 Torred Daytona #1988 2002 Trans Am WS6 A4 1980 Z/28 388/2004 R 1971 Firebird project |
|
|
|
Thread Tools | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
DIY : Install headers on 2010 Camaro SS | Nine Ball | Camaro DIY & HOW-TO instructions & discussions | 70 | 06-25-2020 06:40 PM |
Camaro Heritage Grill DIY install (now with official GM install instructions). | vuduman67 | Camaro DIY & HOW-TO instructions & discussions | 216 | 12-03-2014 05:18 PM |
Bowtie Modification for the Heritage Grille with SS emblem | cerberus | Cosmetics and Lighting Modification Discussions | 19 | 11-08-2011 08:26 AM |
Heritage Grille install - How tough is it? | IndyDave | Cosmetics and Lighting Modification Discussions | 10 | 04-03-2010 05:18 PM |