01-25-2015, 04:25 PM | #1 |
Drives: 2012 ZL1 Camaro Victory Red Join Date: Jan 2013
Location: Fort Wayne Indiana
Posts: 333
|
Car lift
Ok forum friends the other day I seen a demo of a new way to lift your car it was on facebook but need everyone's help because I can't find the site and wanted to share it with everyone and buy them for myself. So here is what I remember about them you jack up one wheel and roll these lifts under the tire's they look like a square frame with wheels you put them under all 4 wheels then you slide your floor jack back under each one till you have reached your desired height you want they will lock out at any height you like! My thoughts are if you are doing anything under your car or just to store it in the winter this would be the way to go would be safe and if you where doing any mods this would make it very easy. So if anyone knows of these lifts please chime in.
__________________
2.55 UPPER PULLEY,100MM IDLER PULLEY,160 STAT,PORTED TB,PORTED SNOUT,MSD PLUG WIRES,NKG PLUGS,KENNE BELL EXTERNAL FUEL PUMP,2"KOOKS HEADERS,HIGH FLOW CATS,3"CORSA 60LB DEKA INJECTORS TUNED BY FROST 580RWHP,571RWTQ.
|
01-25-2015, 04:33 PM | #2 |
Drives: 2018 Hyper Blue 1SS 1LE Join Date: Jul 2011
Location: Brownsburg, Indiana
Posts: 6,241
|
__________________
Ryan
* 2018 1SS 1LE Camaro Hyper Blue Metallic Car Build: http://www.camaro6.com/forums/showth...0#post10049680 |
01-25-2015, 05:32 PM | #3 |
Drives: 2018 Hyper Blue 1SS 1LE Join Date: Jul 2011
Location: Brownsburg, Indiana
Posts: 6,241
|
No problem. These are a very interesting product. Going to be doing headers in the next month or 2 wish I had em
Ryan
__________________
Ryan
* 2018 1SS 1LE Camaro Hyper Blue Metallic Car Build: http://www.camaro6.com/forums/showth...0#post10049680 |
01-25-2015, 08:04 PM | #4 |
Go fast, please.
|
My friend PM'ed the guy who makes them. They are around 500 dollars I'm pretty sure. I thought they were a great idea myself, but 500 seemed a bit excessive.
|
01-25-2015, 08:23 PM | #5 |
Drives: '21 ZLE A10 Join Date: May 2012
Location: Mechanicsville, VA
Posts: 6,815
|
You can do headers on ramps no problem.
__________________
'21 ZLE A10 Wild Cherry PDR 2:00.78 VIR Full 10.68@131.69 1.68 60'
'17 ZL1 A10 Mosaic Black PDR/Nav 2:03.08 VIR Full 11.003@129.2 1.75 (sold) '15 Z/28 #325 Black a/c & stereo. 2:10.1 VIR Full (sold) '12 ZL1 A6 Black 10.52@131 1.55 60' 2:13 VIR Full (sold) |
01-26-2015, 06:31 AM | #6 |
Drives: 20 1LE 2SS M6 Rally Green Join Date: Mar 2014
Location: Franklin WI
Posts: 6,632
|
I'd like a set of these the next time I replace a clutch.
__________________
"the trouble with our liberal friends is not that they're ignorant; it's just that they know so much that isn't so.” Ronald Reagan - |
01-26-2015, 06:49 AM | #7 |
I made my own, using 2x4's
__________________
2SS/RS IBM * American Racing BLVD Wheels * 275/40 * 295/40 Toyo Proxes * Eibach 1" drop Springs * Elite Catch Can * CAI w/ scoop * CFD Carbon Fiber Pistol Grip Shifter w/ Tap Shift * APR Carbon Fiber Splitter * Sequential Tail Lights * MPD1 Spoiler * Hex Vents (CF dipped) * GFX Skirts * BBK SS Shorties * MBRP 3"Exhaust w/ X pipe * Solo Hi-Flow Cats *
|
|
|
|
Thread Tools | |
|
|