Oil catch can install help - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Rico · 08-11-2014, 03:22 PM

After getting my SLP supercharger installed, I can't for the life of me figure out where to connect my catch can. I searched the same location where it was before, but I still can't figure out where it connects. Can anyone help this lost soul? Pics would be nice as well. Thanks

Rico · 08-11-2014, 05:46 PM

Anyone?

JDP Sales · 08-11-2014, 05:51 PM

Rear of the drivers side valve cover, you should see a nipple/port that will likely have a line running to the supercharger just behind the throttle body. That will be the line you are putting the catch can in-line with.

Best regards,

Tyler
888-308-6007

Rico · 08-12-2014, 04:36 PM

Thanks for the help

Rico · 08-13-2014, 04:50 PM

So I take it, this is where I need to connect them. Since I have the apex can, does anyone have a good idea of how to connect it? The mount that came with it is too long to fit like what's in the picture. Thanks Iam Broke for letting me use your picture hehe.

atiprocharger · 05-11-2015, 12:27 PM

I am having the same problem. Where you have the catch can is where I have the Roto fab WW relocation reservoir. Any other ideas as to where the catch can can go?

JDP Sales · 05-11-2015, 12:43 PM

Quote:

Originally Posted by atiprocharger

I am having the same problem. Where you have the catch can is where I have the Roto fab WW relocation reservoir. Any other ideas as to where the catch can can go?

You can use the ZL1 mounting bracket. That's generally how we'll do it on supercharged applications.

Best regards,

Tyler
888-308-6007

AITI · 05-11-2015, 12:47 PM

The RX short "L" bracket should work there with most cans....not sure the price though.

I like that you chose Cam Motion for your grind....really some of the best out there for true understanding.

AITI · 05-11-2015, 12:50 PM

SLP puts the coolant reservoir right there.... looks pretty tight.

atiprocharger · 05-11-2015, 12:53 PM

yeah, it wont fit there with the coolant reservoir there....

JDP Sales · 05-11-2015, 01:11 PM

Quote:

Originally Posted by atiprocharger

yeah, it wont fit there with the coolant reservoir there....

Okay, you could try this mounting. This was the first ZL1 bracket, but we can still get it.

Best regards,

Tyler
888-308-6007

atiprocharger · 05-11-2015, 01:24 PM

how much? Does it fit the apex CC?

JDP Sales · 05-11-2015, 01:27 PM

Quote:

Originally Posted by atiprocharger

how much? Does it fit the apex CC?

I don't believe so. Their CC has 4 mounting bolts to the can.

Best regards,

Tyler
888-308-6007

08-11-2014, 03:22 PM	#1
Rico Flying da helicopter Drives: Black SS/RS Join Date: Oct 2009 Location: HI Posts: 1,215 View My Garage	Oil catch can install help After getting my SLP supercharger installed, I can't for the life of me figure out where to connect my catch can. I searched the same location where it was before, but I still can't figure out where it connects. Can anyone help this lost soul? Pics would be nice as well. Thanks

08-13-2014, 04:50 PM	#5
Rico Flying da helicopter Drives: Black SS/RS Join Date: Oct 2009 Location: HI Posts: 1,215 View My Garage	So I take it, this is where I need to connect them. Since I have the apex can, does anyone have a good idea of how to connect it? The mount that came with it is too long to fit like what's in the picture. Thanks Iam Broke for letting me use your picture hehe. Attached Images Last edited by Rico; 08-13-2014 at 07:47 PM.

05-11-2015, 12:27 PM	#6
atiprocharger Drives: Black 2018 Camaro ZL1 auto Join Date: Nov 2012 Location: Atlanta GA Posts: 282 View My Garage	I am having the same problem. Where you have the catch can is where I have the Roto fab WW relocation reservoir. Any other ideas as to where the catch can can go? __________________ 2018 ZL1 A10 with PTB, ROTOFAB, Pulley and tune from Vengeance. 607 rwhp/647 rwtq

05-11-2015, 12:53 PM	#10
atiprocharger Drives: Black 2018 Camaro ZL1 auto Join Date: Nov 2012 Location: Atlanta GA Posts: 282 View My Garage	yeah, it wont fit there with the coolant reservoir there.... __________________ 2018 ZL1 A10 with PTB, ROTOFAB, Pulley and tune from Vengeance. 607 rwhp/647 rwtq

05-11-2015, 01:24 PM	#12
atiprocharger Drives: Black 2018 Camaro ZL1 auto Join Date: Nov 2012 Location: Atlanta GA Posts: 282 View My Garage	how much? Does it fit the apex CC? __________________ 2018 ZL1 A10 with PTB, ROTOFAB, Pulley and tune from Vengeance. 607 rwhp/647 rwtq

08-11-2014, 05:46 PM	#2
Rico Flying da helicopter Drives: Black SS/RS Join Date: Oct 2009 Location: HI Posts: 1,215 View My Garage	Anyone?

08-11-2014, 05:51 PM	#3
JDP Sales Drives: Chevys at the limit Join Date: Nov 2010 Location: SLC, UT Posts: 9,621	Rear of the drivers side valve cover, you should see a nipple/port that will likely have a line running to the supercharger just behind the throttle body. That will be the line you are putting the catch can in-line with. Best regards, Tyler 888-308-6007

08-12-2014, 04:36 PM	#4
Rico Flying da helicopter Drives: Black SS/RS Join Date: Oct 2009 Location: HI Posts: 1,215 View My Garage	Thanks for the help

05-11-2015, 12:47 PM	#8
AITI Account Suspended Drives: 2015 LFX Auto Join Date: Apr 2015 Location: US of A Posts: 280	The RX short "L" bracket should work there with most cans....not sure the price though. I like that you chose Cam Motion for your grind....really some of the best out there for true understanding.

05-11-2015, 12:50 PM	#9
AITI Account Suspended Drives: 2015 LFX Auto Join Date: Apr 2015 Location: US of A Posts: 280	SLP puts the coolant reservoir right there.... looks pretty tight.