01-04-2017, 12:41 PM | #1 |
2013 Camaro SS1LECTSVZ28
Drives: 2013 AGM 1SS/1LE Join Date: Nov 2012
Location: Suburbs of Detroit, MI
Posts: 2,440
|
AP Brakes + 18" Apex Wheels
Hello all,
BRAKES HAVE BEEN SPOKEN FOR! (Pending trade/sale) I will be parting ways with my road race brake and wheel set-up kit I have AP Brake kit and Qty 8, 18" Apex wheels (with tires) As these are both expensive and highly specialized I wanted to keep it out of the general for sale area and offer them here first. Looking to start with a trade or cash. For the brakes ONLY I am looking for $3200 shipped OR I will consider a MINT set of Red Corvette C7 ZO6 calipers/2 pieces rotors as a partial trade. I am keeping my Camaro, but have purchased C6 Corvette Grand Sport that will be more of a dedicated track car. 9668 calipers will not fit under the Grand Sport front wheels or I would keep them. GS Calipers will not fit the Camaro :( ESSEX AP Racing 9668 (25mm pad) 372mm Rotor: Part #: 13.01.10042 (Retail is $4500 + Pads) https://www.essexparts.com/essex-des...2mm-gen5camaro I also have the following Apex Race parts PS-7 18x10" ET 25 Satin Black (4) Apex Race parts EC-7 18x11" ET 25 Satin Black (4) 305/35/18 Nitto NT-01 (4) Lots of life left 295/30/18 Toyo R888 (4) Lots of life left....small OD, but great for a short track (1.5 miles) 8 TPMS sensors 10 Brand New Extended GM studs 8 Center Caps 2 hub centric 7mm Alloy Spacers I current run the wheels 10" Front, 11" rear so the sets are "mixed" I have run 10" on all 4 corners with the 305 tires. I have not run the 11" on the front. I got them from a car we set-up and we ran them on the front: See Below FITMENT: To run the 18x10" on the front with OEM struts (I have Z/28)and -2.0 of camber you must install extended studs (I HAVE 10 brand new GM ones that I will supply with the sale, easy install) and a 7mm spacer (Included in the sale). IF you want to run the 11s you need to grind/round/angle one section of the knuckle. If you have any questions (regarding this set-up only) please let me know....make an offer on it all if you want via PM and come get it -Matt
__________________
Last edited by Dropspeed; 01-05-2017 at 08:52 AM. |
01-05-2017, 12:55 PM | #2 |
Drives: 11 SW SYNERGY SERIES/14 1SS 1LE Join Date: May 2012
Location: Missouri
Posts: 1,223
|
Looks like a killer setup. Good luck with the Vette, I'm sure it will be a beast once you tinker with it. Had we not just got another set of wheels, I would consider, but 4 sets are enough. LOL. And the wheels I bought from you are going to be sold to help fun new harnesses and a fire system in the car.
__________________
2011 Summit White Synergy Series Edition, the hot innocent woman named Ava that we show off around town, dressed in white complete with angel's wings. Sold, but never forgotten.
2014 1SS 1LE. Bama, sporting Red Rock Metallic demon's horns, when we are ready to get naughty and open a can of whoopass! Airaid, Spectre, Xpel,Bowler shifter Peddars, UMI, Ult Perf. Diode Dynamics, JRE Tune, XS Power battery, Hooker Headers Blackheart exhaust,Powerbrake InstaGram & Twitter: @jlouie62 FB: hangtimeracing |
01-07-2017, 05:30 PM | #3 |
Drives: '14 1LE Join Date: Nov 2013
Location: NJ
Posts: 2,436
|
How much do you want for a set of wheels (with everything needed - tpms, studs, etc), and how much do they weigh? Thanks
|
01-10-2017, 09:15 AM | #4 | |
2013 Camaro SS1LECTSVZ28
Drives: 2013 AGM 1SS/1LE Join Date: Nov 2012
Location: Suburbs of Detroit, MI
Posts: 2,440
|
Quote:
10 are easier to fit....11 front require some cutting/grinding Thanks, Matt
__________________
|
|
10-04-2017, 04:54 PM | #5 |
2011 2SS LS3 Auto
Drives: 2011 Camaro SS Join Date: Feb 2015
Location: Phoenix, AZ
Posts: 63
|
Do you still have the wheels? I am interested. PM was sent.
__________________
2011 2SS LS3 Auto Blue Camaro
Rotofab CAI, Magnuson TVS 2300 & OD cog, L99> now LS3 with custom cam, 1000 cc injectors for E85, flexfuel & secondary fuel pump, ZL1 tank fuel pump, ADM FPCM, Kooks LT headers with high-flow cats, Magnaflow 3" exhaust, catch can, Alkycontrol methanol system, Z28 wheels with Nitto NT05 tires, BMR cradle bushings, sway bars, trailing arms, adjustable toe rods, end links, lower control arms, and 1.25 drop springs, Aero force gauge, wideband sensor gauge in two-hole pillar pod. E85 - 675 HP/643 Tq & 91 - 604 HP/579 Tq, 10.6s ET on MT slicks at 132 mph. |
|
|
Thread Tools | |
|
|