New Design Camber Plates Poll - Page 4 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

HuskerZ28 · 04-25-2017, 03:56 PM

Installing the new design camber plates today, I have the instructions from the first design by Moreno. I am assuming the new ones install the same, anyone have an idea. I search for their web-site g5carbon.com and it does not come up.

RLHMARINES · 04-25-2017, 11:56 PM

Try this....

Quote:

Here is the installation for the camber kit. These are written for the 1st gen kit, however the installation is the same EXCEPT you will SKIP steps 10 and 11, and mate the spring directly to the spring perch. Also, you should torque the camber plate bolts to 20-22 ft-lbs instead of 70 in-lbs

Please feel free to get a hold of me if you have any other questions

Best,
Justin Moreno
Moreno Motorsports

HuskerZ28 · 04-26-2017, 10:30 AM

I had the old instructions and followed them. They are installed, now need to get an alignment.

68camaroz28 · 04-27-2017, 01:28 PM

Quote:

Originally Posted by HuskerZ28

I had the old instructions and followed them. They are installed, now need to get an alignment.

Good to read you have them on. Pictures?
Just curious on where Justin went, PM box full, and no response now. ????

Moreno1 · 04-27-2017, 02:59 PM

Hey guys, we are watching this thread (and pm box is cleared, sorry about that). The reason we are not posting is because I'm currently not sponsoring the site and didn't want to step outside the boundaries. Too busy at university and don't have a lot of time be on the forums to make it worthwhile. That will change in June when I graduate. You can contact me directly at jm@morenomotorsports.com or pm me for my cell.

Thanks,

Justin Moreno

RLHMARINES · 04-28-2017, 01:29 PM

I got mine installed today.....

HuskerZ28 · 04-29-2017, 10:48 AM

Installled picture

RLHMARINES · 04-29-2017, 01:30 PM

Pete and the great guys over at JPSS did the installation for me along with some other goodies.

Moreno1 · 07-25-2017, 10:14 AM

Hey guys, thanks for all the orders

View Poll Results: Which Design do you like best?
Flat top plate?	27	64.29%
Top plate with pockets cut out?	15	35.71%
Voters: 42. You may not vote on this poll

04-28-2017, 01:29 PM	#48
RLHMARINES 1st Civ. Div. Drives: Camaroless for now...RIP "Big SexZ" Join Date: Dec 2007 Location: Savannah, Ga Posts: 2,729	I got mine installed today..... __________________ Swift....Silent....Deadly

04-29-2017, 10:48 AM	#49
HuskerZ28 Drives: 2014 Z28 #0007 Join Date: May 2014 Location: Gretna, NE Posts: 77	Installled picture Attached Images

04-29-2017, 01:30 PM	#50
RLHMARINES 1st Civ. Div. Drives: Camaroless for now...RIP "Big SexZ" Join Date: Dec 2007 Location: Savannah, Ga Posts: 2,729	Pete and the great guys over at JPSS did the installation for me along with some other goodies. Attached Images __________________ Swift....Silent....Deadly Last edited by RLHMARINES; 04-29-2017 at 06:38 PM.

04-25-2017, 03:56 PM	#43
HuskerZ28 Drives: 2014 Z28 #0007 Join Date: May 2014 Location: Gretna, NE Posts: 77	Installing the new design camber plates today, I have the instructions from the first design by Moreno. I am assuming the new ones install the same, anyone have an idea. I search for their web-site g5carbon.com and it does not come up.

04-26-2017, 10:30 AM	#45
HuskerZ28 Drives: 2014 Z28 #0007 Join Date: May 2014 Location: Gretna, NE Posts: 77	I had the old instructions and followed them. They are installed, now need to get an alignment.

04-27-2017, 02:59 PM	#47
Moreno1 Drives: G5.R Join Date: Sep 2010 Location: SoCal Posts: 2,377	Hey guys, we are watching this thread (and pm box is cleared, sorry about that). The reason we are not posting is because I'm currently not sponsoring the site and didn't want to step outside the boundaries. Too busy at university and don't have a lot of time be on the forums to make it worthwhile. That will change in June when I graduate. You can contact me directly at jm@morenomotorsports.com or pm me for my cell. Thanks, Justin Moreno

07-25-2017, 10:14 AM	#51
Moreno1 Drives: G5.R Join Date: Sep 2010 Location: SoCal Posts: 2,377	Hey guys, thanks for all the orders