![]() |
|
|
#1 |
![]() Drives: 2012 Camaro 2SS Ls3 Cammed/Blown Join Date: Feb 2016
Location: Los Angeles Ca
Posts: 267
|
Anyone ever had this problem?
So I just got back from visiting family out of the country. I've been gone for about a month my car has been sitting in its canopy it has been started but not drivin now when I take it on the freeway any speed over 50 it's start vibrating and the steering wheel shakes and it get worse until about 70. Anyone know what this could be?
Thanks in advance |
|
|
|
|
|
#2 |
![]() Drives: 2015 Summit White LS3 Join Date: Apr 2016
Location: Ohio
Posts: 16
|
Flat spotted tires from sitting can sometimes do this, but usually correct themselves pretty quick.
|
|
|
|
|
|
#3 |
![]() Drives: 2012 Camaro 2SS Ls3 Cammed/Blown Join Date: Feb 2016
Location: Los Angeles Ca
Posts: 267
|
I've already drivin the car about 50 miles still does it
|
|
|
|
|
|
#4 |
![]() ![]() ![]() Drives: 2014 2SS/RS Join Date: Dec 2014
Location: Raleigh, NC
Posts: 1,053
|
1. Did you check the air pressure?
2. Are you sure the relatives that started up your car to let it idle while you were gone were not out joyriding? (few can resist)
__________________
2014 2SS/RS, Z28 CAI and High Wing Spoiler, ZL1 5.1:1 Ratio Short-Throw Shifter, ZL1 Pedals, ZL1 splash guards, NPP Dual-mode quad tip exhaust, Z28 strut tower brace, Camaro LED Cup-holders with footwell Lighting option, Leather visors, and Leather E-brake boot. Chevy dealer sponsored 67 retro SS nose stripe package.
|
|
|
|
|
|
#5 |
![]() Drives: 2012 Camaro 2SS Ls3 Cammed/Blown Join Date: Feb 2016
Location: Los Angeles Ca
Posts: 267
|
Ya I made sure the front tires had air in them it feels like the shaking is coming from there and I'm 100% sure no one drove it
|
|
|
|
|
|
#6 |
![]() |
check for loose suspension parts and if all is tight then it may be your rack and pinion. Happened to a friend and that was his problem
__________________
Livernois Stage II Heads & Cam, LS7 Lifters, Ported Intake & Throttle Body, Rotofab CAI, BBK High Flow Fuel Rail @ Guage, Eaton Tru Trac Posi with 3.91 gears, 1000 HP Axels, Kooks Long tubes & full Corsa Exhaust, GM Hurst Short Throw Shifter, Mcleod RXT Twin Disc, Vitesse Throttle Controller, 1.5" Lowering Springs, Strut Tower Brace, SLP 25% Underdrive Pulley, Apex reservoir relocation kit and air scoop.
|
|
|
|
|
|
#7 |
![]() ![]() Drives: 2015 Chevy Camaro 2LS Join Date: May 2017
Location: MWC, OK
Posts: 815
|
|
|
|
|
|
|
#8 |
![]() Drives: 2012 Camaro 2SS Ls3 Cammed/Blown Join Date: Feb 2016
Location: Los Angeles Ca
Posts: 267
|
No leaks. Is it possible that the tires got permentaly flat spotted?
|
|
|
|
|
|
#9 |
![]() ![]() Drives: 2015 Chevy Camaro 2LS Join Date: May 2017
Location: MWC, OK
Posts: 815
|
modern radial tires.. highly unlikely for just sitting a month.
|
|
|
|
|
|
#10 |
![]() Drives: 2012 L99 2SS Join Date: Apr 2017
Location: Lexington, KY
Posts: 17
|
If it's predictable- meaning shake at an exact speed up to another exact speed, in your case 50-70 then your tires need rebalanceing. You've likely lost a wheel weight somewhere.
|
|
|
|
|
|
#11 |
![]() Drives: 2012 Camaro 2SS Ls3 Cammed/Blown Join Date: Feb 2016
Location: Los Angeles Ca
Posts: 267
|
I'll take them to get rebalanced and see what happens
Thanks everyone |
|
|
|
|
|
#12 |
![]() Drives: 2010 Camaro 2SS/RS ABM 6M Join Date: Jul 2017
Location: Kansas
Posts: 617
|
I would be highly shocked if a month of sitting caused a flat spot that bad. Especially if the tires were aired properly.
Plus you should notice it before you got to 50 if they were. Hope it's nothing major! |
|
|
|
|
|
#13 |
|
Fast Cars and Old Guitars
Drives: 2015 2SS RS (L99, baby!) Join Date: Apr 2012
Location: N. CA
Posts: 4,254
|
Did you note the mileage? Possible damaging 'joy ride?'
__________________
“I don’t want to belong to any club that would have me as a member.” - Groucho Marx
|
|
|
|
|
|
#14 |
![]() ![]() ![]() ![]() ![]() ![]() Drives: 2011 2SS/RS M6 Join Date: Oct 2015
Location: Utah
Posts: 1,940
|
At the dealership I would have them do a road force balance. It will show if the tire is simply out of balance, has a flat spot or is out of round.
|
|
|
|
|
|
|
|
![]() |
| Thread Tools | |
|
|