You are browsing camaro5 
 |
|
09-06-2017, 08:44 PM
|
#1513 |
|
ZL1 Pilot
|
I would have tried the lid spacer until he quoted me 600 bucks. I didn't want to pay that much
__________________
 |
|
|
|
09-06-2017, 09:00 PM
|
#1514 |
|
'It's an experiment'
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014
Location: Dallas TX
Posts: 8,709
|
Well, I was lucky. Got in on the pre release special. $450 shipped before they left the forum.
Gonna try this one out and see if it really helps... -Don
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 |
|
|
|
|
09-07-2017, 01:03 PM
|
#1515 |
|
'It's an experiment'
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014
Location: Dallas TX
Posts: 8,709
|
Here is my ATI/Lingenfelter pulley update:
 The 18% OD pulley:  I have to 'grind' out a small area on the passenger's side mount for the compressor, but pretty much this is a plug-n-play update (do have to also replace the power-steering pulley) Getting things boxed up along with all the extra stuff I'll need. Should make for a fun and interesting trip ;o) -Don
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 |
|
|
|
|
09-07-2017, 01:08 PM
|
#1516 |
   Drives: Z06 wannabe Join Date: Feb 2015
Location: Daytona Beach, FL
Posts: 1,200
|
I would Highly recommend the ARP balancer bolt if you aren't already.
Its just under 30 bucks, but you will see my point once you hold them beside each other.
__________________
Apex Focused
|
|
|
|
|
09-07-2017, 01:15 PM
|
#1517 |
|
'It's an experiment'
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014
Location: Dallas TX
Posts: 8,709
|
Yep, we have that ;o). This kit came with the factory, but I already had the ARP bolt.
Never hurts to remind me ;o) -don
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 |
|
|
|
|
09-07-2017, 01:16 PM
|
#1518 |
|
'It's an experiment'
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014
Location: Dallas TX
Posts: 8,709
|
BTW, Andy @ ADM has a forged LSA for sale:
http://www.camaro5.com/forums/showthread.php?t=507231 Just took it out! -Don
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 |
|
|
|
|
09-07-2017, 02:10 PM
|
#1519 |
|
ZL1 Pilot
|
Mic the crank vs. The balancer before it's put on. Mine was actually tight. Took it back off to re cam and thought I was going to break the crankshaft. Twisted a 3/8 tool steel dowel rod pulling that thing off
__________________
|
|
|
|
|
09-07-2017, 02:21 PM
|
#1520 |
|
'It's an experiment'
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014
Location: Dallas TX
Posts: 8,709
|
Aaron and the guys should be on it, but I'll remind them...
Thanks! -Don
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 |
|
|
|
|
09-07-2017, 02:50 PM
|
#1521 |
|
'It's an experiment'
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014
Location: Dallas TX
Posts: 8,709
|
I should mention this is an LSA block with an LS3 forged rotating assembly...
-Don
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 |
|
|
|
|
09-07-2017, 04:57 PM
|
#1522 | |
|
Drives: Z06 wannabe Join Date: Feb 2015
Location: Daytona Beach, FL
Posts: 1,200
|
Quote:
__________________
Apex Focused
|
|
|
|
|
|
09-07-2017, 05:33 PM
|
#1523 |
|
'It's an experiment'
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014
Location: Dallas TX
Posts: 8,709
|
Bolt was taped to the box. Too lazy to take it off for the pic ;o)
-Don
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 |
|
|
|
|
09-08-2017, 01:02 PM
|
#1524 |
|
'It's an experiment'
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014
Location: Dallas TX
Posts: 8,709
|
GPI LSA Build Continues!
Heads on and leakdown test!
Aaron said his gauges are 'old' but calibrated @ 5% so any reading needs to subtract 5%:   So, that needle is close to the high green mark! Getting excited for sure... Push rods, rockers next! Sexy Beast! -Don
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 Last edited by hammdo; 09-08-2017 at 05:04 PM. |
|
|
|
|
09-08-2017, 05:04 PM
|
#1525 |
|
'It's an experiment'
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014
Location: Dallas TX
Posts: 8,709
|
GPI LSA Build Continues!
Push Rod preload check:
 going with 7.400! -Don
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 |
|
|
|
|
09-08-2017, 08:49 PM
|
#1526 |
|
'It's an experiment'
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014
Location: Dallas TX
Posts: 8,709
|
My reusable track numbers have shipped!
Here is the format:  Ready for the 19th! -Don
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 |
|
|
|
|
|
|
|
 |
| Thread Tools | |
|
|
