08-15-2011, 09:06 PM | #505 | |
DAP-ONE [COTW - 12/23/13]
|
Quote:
__________________
|
|
08-16-2011, 02:28 AM | #506 |
Drives: Orange Crush 2021 ZL1 1LE Join Date: Mar 2011
Location: Waldorf, Maryland
Posts: 60
|
I've been reading this thread and I read connect to grey then I see purple wire. Are the results the same I want the foot well lights to work in unison with the dome light. Also I got the LED light strip from Oracle, there's not a perfect place to secure them.
|
08-16-2011, 06:35 AM | #507 | |
Let's go Rangers!
|
Quote:
Aslo refer to post for 496, I posted a way to easily tap the grey wire (without breaking your back) As for mounting the ACC strips, here is what I did (as I did not feel they were stiking very well to the plastic with all the groves and indents). I used a paint mixing stick (you can you any type of thin wood, the thinner the better) and cut it to the size of the strips, and then applied 3m double sided tape, I then mounted the strips to the stick. On the passengers side I mounted it the honeycomb looking plastic piece, it will hold no problem. For the drivers side there is a vey obvious location (sorry don’t know how to explain it), if you cannot spot it, let me know and I'll snap a picture. Last edited by nyrfan; 08-16-2011 at 09:11 AM. |
|
08-16-2011, 08:58 AM | #508 |
Furious Shine
Drives: None Join Date: Mar 2011
Location: Indiana
Posts: 669
|
I used zip ties on the passenger side as there were a few holes/cutouts at the bottom of the dash (below the glove box). I used the 3m tape for the drivers side though as there were no holes. Seems to be holding fine so far!
|
08-16-2011, 12:24 PM | #509 | |
Drives: Orange Crush 2021 ZL1 1LE Join Date: Mar 2011
Location: Waldorf, Maryland
Posts: 60
|
Quote:
|
|
08-16-2011, 01:35 PM | #510 | |
Let's go Rangers!
|
Quote:
|
|
08-17-2011, 06:19 PM | #511 |
Mid-Florida Camaro Club
|
Thank you nyrfan for helping me install the footwells. "You Rock" We did discover my wires were set further back in the dash then his own car which made the install a bit more challenging.
A couple pics of the finished product: |
08-17-2011, 06:30 PM | #512 | |
Let's go Rangers!
|
Quote:
It was good to finally meet you!! |
|
08-19-2011, 07:22 AM | #513 | |
Emerald Coast Camaros
|
Quote:
Sweet!
__________________
Had: 69' RS, 78' Z28, 98' SS Have: 2010 1RS/SS |
|
08-19-2011, 03:15 PM | #514 |
Drives: 2010 2SS, 2017 Silverado LTZ Join Date: Jan 2007
Location: Denver,PA
Posts: 3,195
|
ttt
__________________
2010 2SS/RS Victory Red, MN6, 1-7/8 Kooks LT Headers, SLP Axle Back, Edelbrock E-Force S/C, ZL1 Fuel Pump, 72# Injectors, JRE fuel rail upgrade, Roto-Fab CAI, Elite Catch Can, Billet Hurst Shifter, DSS 1000HP axles, Spohn Trailing Arms, Toe Links, Lower Control Arms. Chrome American Racing Torq-Thrust wheels. 546/rwhp & 522/rwtq & 10.9# boost Tune by Jeremy Formato.
|
08-23-2011, 01:46 PM | #515 |
Drives: 2010 2SS, 2017 Silverado LTZ Join Date: Jan 2007
Location: Denver,PA
Posts: 3,195
|
Does anybody know what amp the fuse is for the dome light? I think it blew the fuse, because the dome light does't work at all.
__________________
2010 2SS/RS Victory Red, MN6, 1-7/8 Kooks LT Headers, SLP Axle Back, Edelbrock E-Force S/C, ZL1 Fuel Pump, 72# Injectors, JRE fuel rail upgrade, Roto-Fab CAI, Elite Catch Can, Billet Hurst Shifter, DSS 1000HP axles, Spohn Trailing Arms, Toe Links, Lower Control Arms. Chrome American Racing Torq-Thrust wheels. 546/rwhp & 522/rwtq & 10.9# boost Tune by Jeremy Formato.
|
08-24-2011, 03:00 AM | #516 |
COTW 5/27/13
|
did you replace the dome light with the led ? or did it just stop working?
__________________
622RWHP/512FTLBS on 91 octane 2.9l Whipple 4" pulley. Vengance VRSP3 cam. Lots of BMR & AAC. Body work by Gary's Customz. Nic D tuned My build thread |
08-24-2011, 10:05 AM | #517 |
Drives: 2010 2SS, 2017 Silverado LTZ Join Date: Jan 2007
Location: Denver,PA
Posts: 3,195
|
I just added the footwell LED lights. I blew a fuse and couldn't locate it. I did find it last evening. It was a 20 amp fuse in the fuse box under the hood #33. Everything is working fine now.
__________________
2010 2SS/RS Victory Red, MN6, 1-7/8 Kooks LT Headers, SLP Axle Back, Edelbrock E-Force S/C, ZL1 Fuel Pump, 72# Injectors, JRE fuel rail upgrade, Roto-Fab CAI, Elite Catch Can, Billet Hurst Shifter, DSS 1000HP axles, Spohn Trailing Arms, Toe Links, Lower Control Arms. Chrome American Racing Torq-Thrust wheels. 546/rwhp & 522/rwtq & 10.9# boost Tune by Jeremy Formato.
Last edited by sscamaro; 08-24-2011 at 11:41 AM. |
08-24-2011, 10:31 AM | #518 |
DAP-ONE [COTW - 12/23/13]
|
What location (number) was that 20 amp fuse in? I would like to know in case I run into this issue when I do mine.
__________________
|
|
|
Thread Tools | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Where to wire in ambient footwell lighting? | cybercoaster | Cosmetics and Lighting Modification Discussions | 32 | 01-11-2016 11:08 AM |
Anyone have the Footwell Lighting Kit Installed? | wildthing001967 | Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum | 12 | 07-03-2011 05:00 PM |
AACStyle footwell lighting problem | TRSS2 | Camaro DIY & HOW-TO instructions & discussions | 8 | 01-23-2010 06:41 PM |
footwell neon lighting. How to wire to have it come on the other ambient lighting? | Jakefeb3 | Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum | 6 | 11-22-2009 09:32 PM |