Livernois 2C Cam and TC installed With Review and VIDS!! - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

jsharp · 03-19-2011, 11:44 PM

As many of you know I just sent my car back to LIVERNOIS MOTORSPORTS for:
2C camshaft 224/236 .608/.612 117LSA
Livernois Springs, pushrods, and retainers
LS7 Lifters
DOD delete
Precision Industries 2400 TC

TO ACCOMPANY MY:
Maggie with 3.6 pulley and BAP
Kooks Headers with Hi flow cats
NOWEEDS diverters
Ported TB
Rotofab CAI
BMR Suspension

RESULTS:
93 Octane
546RWHP with diverters closed
556RWHP with diverters open
Torque showed 467 but is hidden by TC on dyno should be around 500.

REVIEW: OMG!!! I am not just talking this build up. The car is like night and day now that it has the cam and TC. The trans tune feels perfect with the TC and the car has acceleration like it should have from the factory. The sound is nothing short of bad A** and has the perfect mix between choppy and smooth if that makes sense; when opening the diverters its literally like a whole different car and its loud and choppy like and aggresive cam which I like but did not want all the time!! Drivability is great and I have yet to find a spot that didnt feel right; EXCEPT going up a steep hill on a chat road at 3mph with a cam and stall lol. Trans temps about 189 or so; I plan to do ADM trans cooler. If your thinking of a build like mine you really should not hesitate; you will be so amazed. I am at about 7lbs of boost with this setup. I would like to say thanks to Andy, Dave, Rick, and Dan for everything.

VIDEOS As Promised:

DYNO:

Idle/Revs:

jsharp · 03-19-2011, 11:46 PM

More vids to come as I make them

mikeSS · 03-19-2011, 11:57 PM

nice, i have always liked your car before. now with the cam its even better of course. better change that sig info

jsharp · 03-20-2011, 12:05 AM

DONE!!

2010 SSRS · 03-20-2011, 12:26 AM

another bad azz Camaro, very nice.

jsharp · 03-20-2011, 08:06 AM

Thanks so much!

marticus24 · 03-20-2011, 12:22 PM

Quote:

Originally Posted by jsharp

Thanks so much!

Told you you'd love the sound

Congrats and enjoy.

navyblueSS · 03-20-2011, 01:39 PM

Nice, sounds good!

Agent WD-40 · 03-20-2011, 03:37 PM

Sounds great! Sounds like the TC is perfect too.

steeleshark2 · 03-20-2011, 04:04 PM

That sounds AWESOME!!

jsharp · 03-20-2011, 04:30 PM

I drove it around town today and usually I can keep a straight face when people look at the car but with the diverters open and that lope I was

jsharp · 03-20-2011, 04:31 PM

Yes I believe the TC is perfect I cannot believe the night and day difference. At times I feel like I have a manual!! I think I will need that trans cooler soon though. Normal driving with a couple of punches 200 degrees all the time.

Bonemaro · 03-20-2011, 04:43 PM

Very sweet sound man, good job!

Darth_Emma · 03-20-2011, 09:26 PM

OMG! Sound amazing. I can't wait to get mine back with the cam and stall next week!

Thanks for posting the videos. You should be very proud of your monster!

03-19-2011, 11:44 PM	#1
jsharp NOW CAMMED & SUPERCHARGED Drives: 2010 Camaro 2SS/RS Black w/ IOM Join Date: Oct 2008 Location: Ar Posts: 2,336	Livernois 2C Cam and TC installed With Review and VIDS!! As many of you know I just sent my car back to LIVERNOIS MOTORSPORTS for: 2C camshaft 224/236 .608/.612 117LSA Livernois Springs, pushrods, and retainers LS7 Lifters DOD delete Precision Industries 2400 TC TO ACCOMPANY MY: Maggie with 3.6 pulley and BAP Kooks Headers with Hi flow cats NOWEEDS diverters Ported TB Rotofab CAI BMR Suspension RESULTS: 93 Octane 546RWHP with diverters closed 556RWHP with diverters open Torque showed 467 but is hidden by TC on dyno should be around 500. REVIEW: OMG!!! I am not just talking this build up. The car is like night and day now that it has the cam and TC. The trans tune feels perfect with the TC and the car has acceleration like it should have from the factory. The sound is nothing short of bad A** and has the perfect mix between choppy and smooth if that makes sense; when opening the diverters its literally like a whole different car and its loud and choppy like and aggresive cam which I like but did not want all the time!! Drivability is great and I have yet to find a spot that didnt feel right; EXCEPT going up a steep hill on a chat road at 3mph with a cam and stall lol. Trans temps about 189 or so; I plan to do ADM trans cooler. If your thinking of a build like mine you really should not hesitate; you will be so amazed. I am at about 7lbs of boost with this setup. I would like to say thanks to Andy, Dave, Rick, and Dan for everything. VIDEOS As Promised: DYNO: Idle/Revs: __________________ Livernois Motorsports: Maggie 2300 7psi, Livernois 2C cam/L99 to LS3 Conversion, Ported TB, Rotofab w/adm race scoop, adm trans cooler,Kooks headers no cats, Kooks 3" exhaust. METCO breather. Precision 2400 Vigilante TC. Eibach Lowering Springs & Swaybars. BMR Trailing arms, BMR Rear Cradle Bushings, BMR Toe Rods, BMR Differential bushings. Vossen CV3 20's w/ 305 Mickey Thompson @25psi. Zl1 front bumper. OE Zl1 Hood and matte black insert. 556RWHP/500RWTQ L99 Last edited by jsharp; 03-23-2011 at 10:51 PM.

03-19-2011, 11:46 PM	#2
jsharp NOW CAMMED & SUPERCHARGED Drives: 2010 Camaro 2SS/RS Black w/ IOM Join Date: Oct 2008 Location: Ar Posts: 2,336	More vids to come as I make them __________________ Livernois Motorsports: Maggie 2300 7psi, Livernois 2C cam/L99 to LS3 Conversion, Ported TB, Rotofab w/adm race scoop, adm trans cooler,Kooks headers no cats, Kooks 3" exhaust. METCO breather. Precision 2400 Vigilante TC. Eibach Lowering Springs & Swaybars. BMR Trailing arms, BMR Rear Cradle Bushings, BMR Toe Rods, BMR Differential bushings. Vossen CV3 20's w/ 305 Mickey Thompson @25psi. Zl1 front bumper. OE Zl1 Hood and matte black insert. 556RWHP/500RWTQ L99

03-20-2011, 12:05 AM	#4
jsharp NOW CAMMED & SUPERCHARGED Drives: 2010 Camaro 2SS/RS Black w/ IOM Join Date: Oct 2008 Location: Ar Posts: 2,336	DONE!! __________________ Livernois Motorsports: Maggie 2300 7psi, Livernois 2C cam/L99 to LS3 Conversion, Ported TB, Rotofab w/adm race scoop, adm trans cooler,Kooks headers no cats, Kooks 3" exhaust. METCO breather. Precision 2400 Vigilante TC. Eibach Lowering Springs & Swaybars. BMR Trailing arms, BMR Rear Cradle Bushings, BMR Toe Rods, BMR Differential bushings. Vossen CV3 20's w/ 305 Mickey Thompson @25psi. Zl1 front bumper. OE Zl1 Hood and matte black insert. 556RWHP/500RWTQ L99

03-20-2011, 12:26 AM	#5
2010 SSRS Drives: 3 V8 Camaros Join Date: May 2009 Location: The Ocean State Posts: 111,186 View My Garage	another bad azz Camaro, very nice. __________________ Jannetty Racing JRE Street Package

03-20-2011, 08:06 AM	#6
jsharp NOW CAMMED & SUPERCHARGED Drives: 2010 Camaro 2SS/RS Black w/ IOM Join Date: Oct 2008 Location: Ar Posts: 2,336	Thanks so much! __________________ Livernois Motorsports: Maggie 2300 7psi, Livernois 2C cam/L99 to LS3 Conversion, Ported TB, Rotofab w/adm race scoop, adm trans cooler,Kooks headers no cats, Kooks 3" exhaust. METCO breather. Precision 2400 Vigilante TC. Eibach Lowering Springs & Swaybars. BMR Trailing arms, BMR Rear Cradle Bushings, BMR Toe Rods, BMR Differential bushings. Vossen CV3 20's w/ 305 Mickey Thompson @25psi. Zl1 front bumper. OE Zl1 Hood and matte black insert. 556RWHP/500RWTQ L99

03-19-2011, 11:57 PM	#3
mikeSS Drives: 2015 c7 Join Date: Nov 2009 Location: MI Posts: 7,462	nice, i have always liked your car before. now with the cam its even better of course. better change that sig info

03-20-2011, 01:39 PM	#8
navyblueSS Drives: 2002 Camaro SS Join Date: Jul 2009 Location: Quitman, LA Posts: 609	Nice, sounds good! __________________ 2015 1LE - CAI intake, TSP longtubes, NPP, Futral Motorsports tuned, BMR 1"lowering springs, BMR trailing arms

03-20-2011, 03:37 PM	#9
Agent WD-40 Drives: 2010 Camaro SS Join Date: Oct 2010 Location: MI Posts: 601	Sounds great! Sounds like the TC is perfect too. __________________ L99 - 440 RWHP Livernois 2c Cam & VVT/DOD Delete Roto-Fab Intake Stainless Works 1 7/8" Long Tube Headers Corsa Exhaust

03-20-2011, 04:04 PM	#10
steeleshark2 Drives: 2010 Transformer 1SS Camaro Join Date: Nov 2009 Location: Kingsland, Ga Posts: 2,553 View My Garage	That sounds AWESOME!! __________________ Build page:http://www.camaro5.com/forums/showth...77#post3083477

03-20-2011, 04:30 PM	#11
jsharp NOW CAMMED & SUPERCHARGED Drives: 2010 Camaro 2SS/RS Black w/ IOM Join Date: Oct 2008 Location: Ar Posts: 2,336	I drove it around town today and usually I can keep a straight face when people look at the car but with the diverters open and that lope I was __________________ Livernois Motorsports: Maggie 2300 7psi, Livernois 2C cam/L99 to LS3 Conversion, Ported TB, Rotofab w/adm race scoop, adm trans cooler,Kooks headers no cats, Kooks 3" exhaust. METCO breather. Precision 2400 Vigilante TC. Eibach Lowering Springs & Swaybars. BMR Trailing arms, BMR Rear Cradle Bushings, BMR Toe Rods, BMR Differential bushings. Vossen CV3 20's w/ 305 Mickey Thompson @25psi. Zl1 front bumper. OE Zl1 Hood and matte black insert. 556RWHP/500RWTQ L99

03-20-2011, 04:31 PM	#12
jsharp NOW CAMMED & SUPERCHARGED Drives: 2010 Camaro 2SS/RS Black w/ IOM Join Date: Oct 2008 Location: Ar Posts: 2,336	Yes I believe the TC is perfect I cannot believe the night and day difference. At times I feel like I have a manual!! I think I will need that trans cooler soon though. Normal driving with a couple of punches 200 degrees all the time. __________________ Livernois Motorsports: Maggie 2300 7psi, Livernois 2C cam/L99 to LS3 Conversion, Ported TB, Rotofab w/adm race scoop, adm trans cooler,Kooks headers no cats, Kooks 3" exhaust. METCO breather. Precision 2400 Vigilante TC. Eibach Lowering Springs & Swaybars. BMR Trailing arms, BMR Rear Cradle Bushings, BMR Toe Rods, BMR Differential bushings. Vossen CV3 20's w/ 305 Mickey Thompson @25psi. Zl1 front bumper. OE Zl1 Hood and matte black insert. 556RWHP/500RWTQ L99

03-20-2011, 04:43 PM	#13
Bonemaro Drives: 2010 RJT 1SS M6 Join Date: Jul 2009 Location: Ann Arbor, Mi. Posts: 1,692 View My Garage	Very sweet sound man, good job!

03-20-2011, 09:26 PM	#14
Darth_Emma Psssssssssshhhhhhhhhhhhh! Drives: under contruction Join Date: Nov 2009 Location: Marysville, Ohio Posts: 12,996 View My Garage	OMG! Sound amazing. I can't wait to get mine back with the cam and stall next week! Thanks for posting the videos. You should be very proud of your monster!