Just finished my supercharger build... - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

SSCeejay · 05-27-2011, 06:07 PM

And I couldnt be happier. The raw power and acceleration is jaw dropping to say the least, and the installation by 2edge performance in Costa Mesa, California was top notch. Chris at 2Edge is a great guy to work with and really knows his stuff. I posted this not really to show off, but more out of respect for the incredible work that he did. I also wanted to thank Mike over at Rotofab as well for his help in getting all of the custom painted parts out so quickly. They are incredible. What I decided to go with is:

Magnusson TVS 2300 Supercharger
TSP cam
Rotofab Air intake
JBA long tube headers
Flowmaster American Thunder exhaust
Snow Performance Methanol injection stage II kit
Kenne Bell Boost A Pump
Custom 2Edge performance spark plug wires
Techafx Hose Relocation Kit
Windshield Washer relocation kit
Custom painted Rotofab Engine covers
Custom painted Rotofab Radiator cover
Custom dyno tune

The final dyno pull resulted in 540 rwhp and 547 lbs/trq with 7 psi of boost. I was hoping to break the 600 hp mark and I am sure that I could if I went with a smaller pulley and bumped the boost up to 9 psi, however I am running on the stock internals and decided to play it safe.

For whatever reason, my favorite part of the car is to get a friend in the passanger seat without them really knowing what I did and listen to their reaction. Usually its a "what the hell" as the tires break loose in second gear. Anyways, I am glad to have joined the supercharged club! I will post some pics of the build a little later because the guys at 2edge deserve to show off their work!

The build is slated to be featured in Fastest Cars magazine as they had a photographer there documenting the build. Thanks for reading and enjoying the build with me!

Caliman93230 · 05-27-2011, 06:12 PM

hurry up and get the pics lol

GEEo · 05-27-2011, 06:14 PM

2010 4 DW · 05-27-2011, 06:24 PM

Right on!

That sounds like a beast!

YOUNGnRECKLESS · 05-27-2011, 06:29 PM

Sounds awesome. Should be awesome to have ur car in a mag too haha. Congrats

BUMBLEB · 05-28-2011, 01:24 PM

Awesome

familycaronROIDS! · 05-28-2011, 10:41 PM

So run it at the L.A invasion tomorrow at Fontana.... See what it runs.

2010 SSRS · 05-28-2011, 10:49 PM

Kick Azz, can't wait to see pics.

mws444 · 05-28-2011, 10:55 PM

I will bet it is hard to stop smiling. Perma grin and super chargers go hand in hand.

Post up some pics! We all wanna see how it looks!

You are also wise in staying safe.....forging that beast will add life and more power safely!

MRGOODWRENCH3 · 05-28-2011, 10:57 PM

Hey Guys here are some pictures. This was one of my favorite builds!!

mws444 · 05-28-2011, 11:02 PM

Quote:

Originally Posted by MRGOODWRENCH3

Hey Guys here are some pictures. This was one of my favorite builds!!

Very nice!! You guys did a very clean install on this one! The white looks very classy.

SSCeejay · 05-29-2011, 03:14 AM

Thanks for the kind words! As you can see, I wasnt lying when I talked about the great install job by 2Edge. Up next is a clutch, axles and the Hotchkins track pack, which will all be installed by 2edge as well

Z_Rocks · 05-29-2011, 03:21 AM

Quote:

Originally Posted by SSCeejay

Thanks for the kind words! As you can see, I wasnt lying when I talked about the great install job by 2Edge. Up next is a clutch, axles and the Hotchkins track pack, which will all be installed by 2edge as well

Just beautiful!!!

SSCeejay · 05-29-2011, 03:21 AM

Quote:

Originally Posted by familycaronROIDS!

So run it at the L.A invasion tomorrow at Fontana.... See what it runs.

I am a little worried to bring it out to the strip right now. I think I want to get a clutch, axles and tires before I start down that path. It is tempting though!

05-27-2011, 06:07 PM	#1
SSCeejay Drives: 2010 SS/RS Camaro Join Date: Apr 2011 Location: Los Angeles Posts: 51	Just finished my supercharger build... And I couldnt be happier. The raw power and acceleration is jaw dropping to say the least, and the installation by 2edge performance in Costa Mesa, California was top notch. Chris at 2Edge is a great guy to work with and really knows his stuff. I posted this not really to show off, but more out of respect for the incredible work that he did. I also wanted to thank Mike over at Rotofab as well for his help in getting all of the custom painted parts out so quickly. They are incredible. What I decided to go with is: Magnusson TVS 2300 Supercharger TSP cam Rotofab Air intake JBA long tube headers Flowmaster American Thunder exhaust Snow Performance Methanol injection stage II kit Kenne Bell Boost A Pump Custom 2Edge performance spark plug wires Techafx Hose Relocation Kit Windshield Washer relocation kit Custom painted Rotofab Engine covers Custom painted Rotofab Radiator cover Custom dyno tune The final dyno pull resulted in 540 rwhp and 547 lbs/trq with 7 psi of boost. I was hoping to break the 600 hp mark and I am sure that I could if I went with a smaller pulley and bumped the boost up to 9 psi, however I am running on the stock internals and decided to play it safe. For whatever reason, my favorite part of the car is to get a friend in the passanger seat without them really knowing what I did and listen to their reaction. Usually its a "what the hell" as the tires break loose in second gear. Anyways, I am glad to have joined the supercharged club! I will post some pics of the build a little later because the guys at 2edge deserve to show off their work! The build is slated to be featured in Fastest Cars magazine as they had a photographer there documenting the build. Thanks for reading and enjoying the build with me!

05-27-2011, 06:12 PM	#2
Caliman93230 Drives: LS3S/C Join Date: Aug 2008 Location: CALI Posts: 1,344	hurry up and get the pics lol __________________ MODS whipple 2.9L s/c, ADM race scoop, 600 rwhp 550 wrtq, .

05-27-2011, 06:29 PM	#5
YOUNGnRECKLESS Building the Beast Drives: 2010 VR LS3 Join Date: Oct 2010 Location: Queens, New York Posts: 1,398 View My Garage	Sounds awesome. Should be awesome to have ur car in a mag too haha. Congrats __________________

05-28-2011, 01:24 PM	#6
BUMBLEB IN GOD WE THRUST Drives: 2010 RY 2SS RS M6 TVS2300 2015 Z06 Join Date: Sep 2009 Location: PARKER,CO Posts: 284	Awesome __________________ SUCKING AIR & GAS & HAULING ASS http://www.picturetrail.com/sfx/album/view/22851126

05-28-2011, 10:41 PM	#7
familycaronROIDS! CMS built Drives: 13 5.0 Join Date: Aug 2009 Location: San Diego, CA Posts: 299	So run it at the L.A invasion tomorrow at Fontana.... See what it runs. __________________ wrenched & tuned by Cunningham Motorsports

05-27-2011, 06:14 PM	#3
GEEo OKCamaros Drives: 4 banger Diesel Join Date: Mar 2010 Location: Philippines Posts: 4,572

05-27-2011, 06:24 PM	#4
2010 4 DW Account Suspended Drives: White 2010 RS/SS Join Date: Dec 2009 Location: San Diego Posts: 672	Right on! That sounds like a beast!

05-28-2011, 10:49 PM	#8
2010 SSRS Drives: 3 V8 Camaros Join Date: May 2009 Location: The Ocean State Posts: 111,186 View My Garage	Kick Azz, can't wait to see pics. __________________ Jannetty Racing JRE Street Package

05-28-2011, 10:55 PM	#9
mws444 Drives: 701 RWHP Lingenfelter/Pedders Beast Join Date: Apr 2009 Location: El Paso Posts: 2,973	I will bet it is hard to stop smiling. Perma grin and super chargers go hand in hand. Post up some pics! We all wanna see how it looks! You are also wise in staying safe.....forging that beast will add life and more power safely! __________________ Lingenfelter forged balanced and blueprinted LS3, Maggie TVS 2300 LPE 9.5" Rearend 3.73,LPE dual disk clutch,10/14 rib belt drive, MTI shifter,RPM Level VI,Corsa stainless cat back, Racing Brake Rotors, LPE calipers, LPE twin fuel pumps, American Racing long tube headers, GT9 cam Port and polished heads and an ADM majic tune. 701 RWHP,Fully Pedderized w/complete bushings and Sportsryder Supercar Remote resevior coilovers. CCW 505t's Nitto Invo's and DR's Beware of the LPE Brotherhood!

05-28-2011, 10:57 PM	#10
MRGOODWRENCH3 Account Suspended Drives: 2010 Camaro 2SS/RS Join Date: Feb 2011 Location: Park City, Utah Posts: 670 View My Garage	Hey Guys here are some pictures. This was one of my favorite builds!!

05-29-2011, 03:14 AM	#12
SSCeejay Drives: 2010 SS/RS Camaro Join Date: Apr 2011 Location: Los Angeles Posts: 51	Thanks for the kind words! As you can see, I wasnt lying when I talked about the great install job by 2Edge. Up next is a clutch, axles and the Hotchkins track pack, which will all be installed by 2edge as well

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Torq's latest Whipple Supercharger build, big power inside!	Erik@Torq	Forced Induction - V8	62	01-06-2012 12:01 PM
The 2011+ Mustang Thread	GatorBlue371	General Automotive + Other Cars Discussion	11874	08-23-2011 01:30 PM
For Us Camaro VSixers... D3Cadillac Just Completed SuperCharger for 3.6L :435HP/430lb	Cmicasa the Great XvX	Forced Induction - V6	46	01-29-2011 12:24 PM
First Ever Kenne Bell Supercharger Install Special!!!	Total_Perf_Eng	Forced Induction	10	03-08-2010 11:24 AM
Vortech Supercharger Systems for 2010 Camaro Official Release	Brian@Vortech	Forced Induction - V8	98	02-20-2010 12:04 AM