You are browsing camaro5 
 |
|
07-20-2011, 08:13 PM
|
#1 |
 
Drives: Corvette Join Date: Jan 2011
Location: Maryland
Posts: 135
|
Finally a TR6060 2nd gear build thread!!!!
Ok, I know there are a lot of you out there with the TR6060 with the 2nd gear grind. I finally got my hand on one with this issue. I'm building this unit for T&T Perfomance. They are a supporting vendor here and if you need any mods or upgrades, don't hesitate to contact Tim for any if your needs. I took my time to disassemble this 2010 unit with 5K miles on it. Have a look for yourself. This unit will be getting carbon blockers on 1-4 gears and bronze fork pads on 1-6.
Ready to tear into it.  The tailshaft housing is off.  The reverse/6th and 5th gears are off.   The main case is off.    Everything is out!  All the parts on the table.  The 1st gear blockers on the left; 2nd gear blockers on the right. Take a close look at the right blockers. Can you see the blue marks on the rings? They got very HOT!!!!!!!!!!!  Close look on the 2nd gear blockers.     The mainshaft is completely disassembled.   Sintered bronze blocker on the left and carbon on the right. 
__________________
 |
|
|
|
07-20-2011, 08:22 PM
|
#2 |
|
Drives: Corvette Join Date: Jan 2011
Location: Maryland
Posts: 135
|
I'll take some pictures on the assembly tomorrow. Most important, I'll get some feed back from the owner with the way this thing shifts after he gets it back. Stay tuned.
__________________
|
|
|
|
|
07-20-2011, 08:45 PM
|
#3 |
|
220/221 whatever it takes
Drives: See sig.... Join Date: Jun 2010
Location: Lafayette In
Posts: 1,132
|
Subscribing
__________________
Brent
2022 BMW X5 M50i 2022 Ram TRX 2021 GT500 CFHP 2016 Challenger Hellcat A8 1058whp/898wtq 1970 Chevelle SS396 4spd |
|
|
|
|
07-20-2011, 09:00 PM
|
#4 |
|
formerly 2011Camaro
Drives: 2011 Camaro LS IBM M6 Join Date: Jul 2010
Location: Fredericksburg, VA
Posts: 816
|
Can you get your hands on an AY6 next???!!!??? Looks good!
__________________
Born on the Island and raised in the sand.
Semper Fidelis  |
|
|
|
|
07-20-2011, 09:23 PM
|
#5 |
     Drives: A Gift From My Wife Join Date: Apr 2009
Location: Powder Springs, GA
Posts: 1,557
|
Ball Park estimate for a shop to R&R this project?
Oh, and Thank You for giving us feedback on a resolution to the problem! -Funk
__________________
2012 Convert 2SS/RS SW/IO LS3 - Build #1081
07/21/2011 - (3800) Order produced and vehicle is being prepared for shipping. 08/09/2011 - (4200) Shipped (vehicle is shipped to the dealer or interim point of delivery). 08/16/2011 - (5000) Vehicle has been delivered to dealer. 08/19/2011 - In my possession.    |
|
|
|
|
07-20-2011, 09:24 PM
|
#6 |
|
Drives: 2010 2SS CGM Camaro, 1988 6.6L IROC Join Date: Mar 2010
Location: Bay Area
Posts: 157
|
Thank you for all your work Rick. Now if only GM would listen...
|
|
|
|
|
07-20-2011, 09:35 PM
|
#7 | |
|
Drives: Corvette Join Date: Jan 2011
Location: Maryland
Posts: 135
|
Quote:
__________________
|
|
|
|
|
|
07-20-2011, 09:37 PM
|
#8 | |
|
Drives: A Gift From My Wife Join Date: Apr 2009
Location: Powder Springs, GA
Posts: 1,557
|
Quote:
What about the carbon ones solves the issue? -Funk
__________________
2012 Convert 2SS/RS SW/IO LS3 - Build #1081
07/21/2011 - (3800) Order produced and vehicle is being prepared for shipping. 08/09/2011 - (4200) Shipped (vehicle is shipped to the dealer or interim point of delivery). 08/16/2011 - (5000) Vehicle has been delivered to dealer. 08/19/2011 - In my possession. |
|
|
|
|
|
07-20-2011, 09:39 PM
|
#9 | |
|
Drives: Corvette Join Date: Jan 2011
Location: Maryland
Posts: 135
|
Quote:
I have done this conversion on few TR6060 equipped Z06 Corvettes with great success. I think the combination of main shaft preload and carbon blockers really did the trick.
__________________
|
|
|
|
|
|
07-20-2011, 09:48 PM
|
#10 |
|
knows 2 facts about ducks
Drives: ...and they're both wrong Join Date: Aug 2009
Location: The HMS Invincible
Posts: 25,072
|
Man that is some serious surgery right there.
__________________
 |
|
|
|
|
07-20-2011, 09:53 PM
|
#11 | |
|
Drives: 2010 2SS CGM Camaro, 1988 6.6L IROC Join Date: Mar 2010
Location: Bay Area
Posts: 157
|
Quote:
|
|
|
|
|
|
07-20-2011, 10:00 PM
|
#12 |
|
Drives: A Gift From My Wife Join Date: Apr 2009
Location: Powder Springs, GA
Posts: 1,557
|
While we wait for Rick's response, what about an different dealer in the Bay Area?
-Funk
__________________
2012 Convert 2SS/RS SW/IO LS3 - Build #1081
07/21/2011 - (3800) Order produced and vehicle is being prepared for shipping. 08/09/2011 - (4200) Shipped (vehicle is shipped to the dealer or interim point of delivery). 08/16/2011 - (5000) Vehicle has been delivered to dealer. 08/19/2011 - In my possession. |
|
|
|
|
07-20-2011, 10:01 PM
|
#13 |
|
Drives: 1999 Trans Am Join Date: Jul 2009
Location: Bridgewater,Ma
Posts: 2,018
|
What I've found is the issue with the 2nd gear.You are probly ussing a thinner blocker and loosening up preload.I actually machine the gear itself for less preload.( the cone part)Found this issue started about 2 years ago with the 2nd gears in alot of these tranny's and replacement 2nd gears.
|
|
|
|
|
07-20-2011, 10:02 PM
|
#14 |
|
Just Because!
Drives: 2010 SIM 2SSRS Join Date: Jun 2010
Location: San Jose, Ca
Posts: 6,909
|
Interesting, Subscribed...
Jason
__________________
|
|
|
|
|
|
|
|
 |
| Thread Tools | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 1st and 2nd gear problems. 1SS 6M | jnm2003 | V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6) | 7 | 10-29-2019 12:22 PM |
| 3rd Gen Camaro Street Stock build thread (dialup beware) | zlathim | 3rd Generation Camaros | 9 | 12-06-2018 10:30 AM |
| Can't get a good 2nd gear scratch - Normal? | Reeko | Dragstrip and Launch Techniques Discussion | 9 | 03-02-2015 05:49 PM |
| APF "Stage II" Turbo Build Thread | 2010 Camaro SS! | Trevor@APF | Forced Induction - V8 | 1 | 01-19-2010 06:50 PM |
| Will the A6 start off in 2nd gear like the vette??? | TomServo | 5th Gen Camaro SS LS LT General Discussions | 9 | 04-10-2009 09:41 AM |
