11-23-2011, 01:24 PM | #1 |
Drives: 2010 camaro 2lt RS Join Date: May 2011
Location: Danbury, Ct
Posts: 58
|
ported intake, heads and headers
Ok , i wanted to let everyone know about a project I started with my friends at RDZmotorsports. I've been thinking about how to get more power out of our engine without going FI route. I recalled reading about another member who worked on porting and polishing a set of heads and intake, but never finished by putting the heads and intake on the car. I decided this was the next best thing to FI. So attached are pics of the project. The car was put back together yesterday a trial run was made and datalogged. The log was sent to trifecta for analysis. Here is vince's reply.
"The log you sent was very interesting. Under full throttle, normally these things show a bunch of knock retard, always. This one showed very little – it was able to run an amazing amount of timing. This should translate into some decent power gains. Fuel looked a little lean, and the trims were off slightly but it looked pretty good." Tuesday the car will be put on a dyno and some fine tuning will be done with Vince at Trifecta. Ill let you know the results then.
__________________
2010 2LT RS Cyber Gray Metallic, White ralley stripes, JBA Shortie headers, SOLO perf HFC & Res. Magnaflow cat back, SS Brakes, Eibach Sways & Springs, Trifecta tune, VMAX throttle body & Catch Can, Custom ported intake, heads, Black ICE-olator, VARARAM.
|
11-23-2011, 01:31 PM | #2 |
Engineer in Training
Drives: IBM 2010 Camaro LS Join Date: Nov 2011
Location: Alabama
Posts: 292
|
looks VERY promising! Also looks like it'll cost a fortune for the rest of us. LOL Keep us posted with the numbers!
__________________
K&N Aircharger CAI, BBK LT's, VMAX black ICE, Trifecta tuned
|
11-23-2011, 01:34 PM | #3 |
All right!! That's what I want to see!!
|
|
11-23-2011, 01:38 PM | #4 |
What does the butt dyno tell you?
|
|
11-23-2011, 01:40 PM | #5 |
Bowtie 'til I Die!
|
Subscribed!
|
11-23-2011, 01:43 PM | #6 |
Account Suspended
Drives: jealous vendors mad!! HAHA!! Join Date: Jan 2011
Location: CYBERGMONSTER@GMAIL.COM
Posts: 3,658
|
What was done exactly and how was it ported? I only see the gasket matched head inlet and outlet of intake manifold.
and same here with KR. I am only seeing around 5 max pass 4k rpm to redline on wot and this is only with the insulator and ported intake manifold. The AFR also went rich after the stg3 porting to 11's. I would love to see the result |
11-23-2011, 01:51 PM | #7 |
Drives: 2010 camaro 2lt RS Join Date: May 2011
Location: Danbury, Ct
Posts: 58
|
What does the butt dyno tell you?
Have not driven the car yet. I'll let you know once I get the car back. What was done exactly and how was it ported? I only see the gasket matched head inlet and outlet of intake manifold. The intake was ported to match the gasket as was the head intake ports, the inlets were also machined to clean up flash and rough casting from the manufacturing of the heads and intake. The same applies to the exhaust ports, they were opened to match the headers ports.
__________________
2010 2LT RS Cyber Gray Metallic, White ralley stripes, JBA Shortie headers, SOLO perf HFC & Res. Magnaflow cat back, SS Brakes, Eibach Sways & Springs, Trifecta tune, VMAX throttle body & Catch Can, Custom ported intake, heads, Black ICE-olator, VARARAM.
|
11-23-2011, 01:54 PM | #8 |
Any valve work?
|
|
11-23-2011, 02:02 PM | #9 |
Drives: 2010 camaro 2lt RS Join Date: May 2011
Location: Danbury, Ct
Posts: 58
|
Any valve work?
No valve work just opening up the air inlets and exhausts to allow for increase in airflow. we are hoping by opening all systems up there will be a much more significant horsepower increase. The signs are there that something positive is going on, we need to work on the air/fuel and then we will see on the dyno.
__________________
2010 2LT RS Cyber Gray Metallic, White ralley stripes, JBA Shortie headers, SOLO perf HFC & Res. Magnaflow cat back, SS Brakes, Eibach Sways & Springs, Trifecta tune, VMAX throttle body & Catch Can, Custom ported intake, heads, Black ICE-olator, VARARAM.
|
11-23-2011, 02:03 PM | #10 |
crazier than a coconut
Drives: 2010 2SS/RS LS3 Join Date: Jul 2010
Location: virginia
Posts: 1,547
|
looks good...
__________________
|
11-23-2011, 02:04 PM | #11 |
Account Suspended
Drives: jealous vendors mad!! HAHA!! Join Date: Jan 2011
Location: CYBERGMONSTER@GMAIL.COM
Posts: 3,658
|
|
11-23-2011, 02:05 PM | #12 |
crazier than a coconut
Drives: 2010 2SS/RS LS3 Join Date: Jul 2010
Location: virginia
Posts: 1,547
|
did you have it flow tested, before/after?
__________________
|
11-23-2011, 02:11 PM | #13 |
Drives: 2010 camaro 2lt RS Join Date: May 2011
Location: Danbury, Ct
Posts: 58
|
did you have it flow tested, before/after?
No flow testing. I followed what one of the other members did but never finished. I recall him doing some flow testing but do not recall the numbers.
__________________
2010 2LT RS Cyber Gray Metallic, White ralley stripes, JBA Shortie headers, SOLO perf HFC & Res. Magnaflow cat back, SS Brakes, Eibach Sways & Springs, Trifecta tune, VMAX throttle body & Catch Can, Custom ported intake, heads, Black ICE-olator, VARARAM.
|
11-23-2011, 02:20 PM | #14 |
Drives: 2010 camaro 2lt RS Join Date: May 2011
Location: Danbury, Ct
Posts: 58
|
If anyone wants to see more pics there are a lot more on RDZmotorsports facebook page.
__________________
2010 2LT RS Cyber Gray Metallic, White ralley stripes, JBA Shortie headers, SOLO perf HFC & Res. Magnaflow cat back, SS Brakes, Eibach Sways & Springs, Trifecta tune, VMAX throttle body & Catch Can, Custom ported intake, heads, Black ICE-olator, VARARAM.
|
|
|
Thread Tools | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Going to sell the camaro, ported heads are going to sell. | bmwdon | Camaro V6 LLT Engine, Exhaust, and Bolt-Ons | 61 | 03-10-2012 10:42 AM |
Dyno numbers with New Era VVT cam and ported heads | mike@newera | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 11 | 03-06-2010 12:48 PM |